Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by M5Stack, this product is a good fit for makers, students and electronics hobbyists.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The M5Stack M5StampS3 BAT Module ESP32-S3-PICO-1-N8R8 8MB Flash PSRAM 2.4GHz Wi-Fi Battery Power RGB LED with 2.54 Header Pin, made by M5Stack, is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specifications:
SoC: ESP32-S3-PICO-1-N8R8 @ Dual-core Xtensa LX7 processor, frequency up to 240MHz
Flash: 8MB
PSRAM: 8MB
Wi-Fi: 2.4 GHz Wi-Fi
Input Power: 3.7V Battery / USB Type-C / DC 5V
RGB LED: 1x WS2812
Battery Interface: SH1.0
Pad GPIO Leads: 11x GPIO (G1/G2/G3/G4/G5/G6/G7/G8/G9/G10/G11) + 1x Wake-up IO (PY_G4_WAKE)
BTB Interface GPIO Leads: 19x GPIO (G40/G38/G12/G13/G14/G15/G16/G18/G21/G46/G45/G41/G43/G42/G39/G17/G44/G47/G48)
BTB Socket: BTB0.408-24PLBDR-M4I, 12*2P-FPC Direct Insertion - Black, 0.4mm pitch
Antenna Socket: IPEX-4
Battery Connector: SH1.0-2P
Antenna Type: FPC Antenna
Operating Temp: 0 ~ 40°C
Power Consumption: Sleep Mode: [email protected], Standby Mode: [email protected], Light Load Mode: [email protected], Full Load Mode: [email protected]
Product Size: 29.8 x 18.0 x 12.0mm
Product Weight: 4.5g

Introduction: Stamp-S3Bat DIP is an embedded core module with integrated power management. It features the ESP32-S3-PICO-1-N8R8 main controller, supporting 2.4GHz Wi-Fi with built-in 8MB Flash and 8MB PSRAM. The module leads out 11 GPIOs and 1 wake-up IO, equipped with a 24P BTB connector (supporting DVP interface). An onboard battery power interface is provided for connecting an external 3.7V lithium battery. It integrates the M5MP1 multi-stage power control design, supporting power input/output control, lithium battery charging control, and status detection for input voltage and battery voltage. It also supports external low-power wake-up; after the main controller enters low-power sleep mode, the power can be woken up via the external wake-up IO. Featuring a programmable RGB LED, the Stamp-S3Bat DIP version comes with pre-soldered 2.54mm standard pitch headers, allowing integration into applications via PCB insertion, breadboard connection, or Dupont cables to help developers quickly build IoT applications.

Features:
1. Integrated ESP32-S3-PICO-1-N8R8 main controller with dual-core Xtensa LX7 processor, supporting 2.4GHz Wi-Fi, 8MB Flash, and 8MB PSRAM.
2. Built-in M5PM1 low-power power management supports power input/output control, lithium battery charging control, and status monitoring for input voltage and battery voltage.
3. Provides 11 GPIO leads and 1 wake-up IO, plus a 24P BTB connector supporting DVP interface for expanded connectivity.
4. Supports 3.7V lithium battery power, USB Type-C, and DC 5V input, with onboard battery interface for external battery connection.
5. DIP version with pre-soldered 2.54mm standard pitch headers and 1x WS2812 RGB LED for easy PCB insertion, breadboard connection, or Dupont cable use.

Package Included:
1 x Stamp-S3Bat DIP
1 x SH1.0 battery connection cable



Product Safety Information

Explore more