
At a glance
Made by M5Stack, this motherboard & development board is a good fit for makers, students and electronics hobbyists. Main specs: product name M5STICKC PLUS; soc ESP32-PICO-D4; power management AXP192. Check that your power source supplies Read via AXP192 configuration before connecting it.
Key Highlights
- Small and easy to carry or mount
- Product Name: M5STICKC PLUS
- Soc: ESP32-PICO-D4
- Power management: AXP192
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Product Name | M5STICKC PLUS |
|---|---|
| Soc | ESP32-PICO-D4 |
| Power management | AXP192 |
| Battery Capacity | 120mAh |
| Memory | 520KB SRAM and 4MB Flash |
| UART Chip | SRAM and 4MB Flash CH552 |
| Body Color | Orange red |
| IR | G9 |
| LED | G1O |
| TFT | MOSI(G15) CLK(G13) DC(G23) RST(G18) CS(G5) |
| Button A | G37 |
| Button B | G39 |
| Button C (WAKE) | Normal buttons,non-programmable |
| HOLD | / |
| Battery voltage detection | Read via AXP192 configuration |
| Power ON | Press the reset BUTTON (BUTTON C) for at least 2 seconds |
| Power OFF | It can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, it is necessary to set the hold(G4) pin to high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again. |
Overview
The M5Stack M5StickC PLUS/PLUS2 ESP32 IoT Development Board with 1.14-inch TFT Screen Mini IoT Controller Graphical Programming Kit, made by M5Stack, is listed in our motherboard & development board range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Product Name: M5STICKC PLUS
- Soc: ESP32-PICO-D4
- Power management: AXP192
- Battery Capacity: 120mAh (a bigger capacity means longer use per charge, but also more weight)
- Memory: 520KB SRAM and 4MB Flash (more memory leaves room for larger programs and buffers)
- UART Chip: SRAM and 4MB Flash CH552 (space for firmware, files or media)
- Body Color: Orange red (quoted range is usually line-of-sight; walls and interference shorten it)
- IR: G9
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Description:
M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more. It boasts a 1.14-inch TFT screen with a resolution of 135*240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities.
M5StickC PLUS2 facilitates the rapid prototyping of IoT products, streamlining the entire development process. Even beginners in programming can easily build interesting applications and apply them to real-life scenarios using M5StickC PLUS2.
Package includes:
Type M5StickC PLUS2 only:
1 x M5StickC PLUS2
or
Type M5StickC PLUS only:
1 x M5StickC PLUS
or
Type M5StickC PLUS2 with watch kit:
1x M5StickC PLUS2
1x Adapter
1x Wall/1515
1x Watch band
1x Type-C USB(50cm)

Quick specs
- Product Name
- M5STICKC PLUS
- Soc
- ESP32-PICO-D4
- Power management
- AXP192
- Battery Capacity
- 120mAh
- Memory
- 520KB SRAM and 4MB Flash
- UART Chip
- SRAM and 4MB Flash CH552
Cheaper Alternatives
10pcs 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board with Protection Dual Functions 1A Li-ion

ESP32 D1 R32 Wireless Development Board WiFi bluetooth CH340 4MB Flash Compatible with Arduinos unos R3 for Wemos D1 Mini
ATMEGA328 328p 5V 16MHz Pro Mini PCB Module Board
Upgrade Options

HackRF One Software Defined Radio 1 MHz to 6 GHz 8-Bit Quadrature Sampling USB-Powered Open Source SDR Development Board

LILYGO® T-Deck Pro ESP32-S3 Development Board 4G/PCM5102A/LoRa/GPS E-Paper Touchscreen QWIIC Interface IoT Communication Device

LILYGO® T-Lora Pager ESP32-S3 LoRa SX1262 Wireless RF Module Dual-mode RFID/NFC RTC GNSS Ai Programmable Handheld AIoT Device













