
1 / 4 · Click to enlarge
AI Summary
A pair of 460KV MAD 3506 EEE brushless motors, each only 72.3 g but delivering up to 1200 g of thrust on 4S–6S LiPo. Built for 11–14 inch carbon props and mid-lift industrial UAV payloads.
Key Highlights
- 460KV windings with 24 poles for smooth, efficient rotation
- 72.3 g per motor with up to 1200 g maximum thrust
- Runs on 4S–6S LiPo systems at up to 204 W
- Twin 694ZZ bearings and 4 mm shaft for stable spin
- Designed around 11–14 inch carbon fibre propellers
- Pack of 2 with propeller plates, adapter rings and hardware
Ideal For
- Industrial inspection drone builders needing mid-lift motors
- Aerial photography and mapping UAV assemblers
- Enterprise multirotor teams planning 11–14 inch prop setups
- Endurance-focused builders counting every gram
- Maintenance crews replacing 3506-class motors
Buying Tip
Check your propeller size and LiPo cell count against the 11–14 inch and 4S–6S range before ordering, and remember two packs are needed for a quadcopter.
Elecvora expert review
Our verdict
The MAD 3506 EEE 460KV is a well-judged motor for mid-lift industrial airframes, pairing low weight with useful thrust and a sensible voltage range. It is a solid choice if your design already calls for 11–14 inch props and 4S–6S power.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 72.3 g per motor with up to 1200 g thrust
- Twin bearings and 24 poles for smooth running
- Flexible 4S–6S LiPo range
- Complete hardware kit included with each pair
Cons
- Battery, ESCs and propellers are not included
- Requires soldering or connector work for the motor leads
- Best performance depends on matching prop size and cell count
Best for
Mid-lift industrial and photography UAV builds using 11–14 inch props
Not ideal for
Small, high-RPM racing quads needing very high KV motors
Specifications
| Model No. / Name | 3506 |
|---|---|
| Motor KV (RPM/V) | 460 KV |
| Motor Type | Brushless Drone Motor |
| Compatible LiPO Batteries | 4S–6S |
| Shaft Diameter | 4 mm |
| Max. Power (W) | 204 |
| Maximum Thrust (gm) | 1200 |
| No of poles | 24 |
| Motor Size (mm) | D:42.5 × 23.8 |
| Bearing | 694ZZ*2 |
| Motor Mount Holes | D:25 M3×4 |
| Weight (g) | 72.3(Each) |
| Shipping Weight | 0.36 kg |
| Shipping Dimensions | 11 × 11 × 7 cm |
What's in the box
- 2 × MAD 3506 EEE Brushless Drone Motor 460KV
- 2 × Propeller plates
- 6 × Adapter rings (Ø4–6)
- 2 × 3.5 mm bullet connectors
- 6 × Heat shrink tubes
- 8 × M3×6 motor mounting screws
- 7 × M3×10 propeller screws
- 2 × MAD stickers
Frequently Asked Questions
What battery should I use with these motors?
Which propellers fit the MAD 3506 EEE?
How much thrust does each motor produce?
How many motors do I get?
Are ESCs included?
What maintenance do these motors need?
Overview
The MAD COMPONENTS 3506 EEE is a brushless outrunner aimed at enterprise and industrial UAV builders who need a compact motor that still carries a useful payload. At 460KV it is tuned for larger, slower-turning propellers, and each motor weighs only 72.3 g while producing up to 1200 g of maximum thrust. That balance of low weight and strong lift makes it a practical choice for multirotors in the mid-lift class.
This listing supplies two motors, so a complete quadcopter needs two packs. The 42.5 × 23.8 mm can measures a modest footprint, and the 25 mm M3 four-hole mount pattern keeps installation straightforward on standard carbon arms.
Key Features
- Efficient 460KV windings matched to 11–14 inch carbon fibre propellers for steady, controlled flight.
- Light build, strong output — 72.3 g per motor with 204 W maximum power and 1200 g peak thrust.
- 24-pole stator for smooth torque delivery and quiet running.
- Twin 694ZZ bearings and a 4 mm shaft to keep the rotor spinning true.
- Flexible voltage range from 4S to 6S LiPo, so you can tune performance to your airframe.
- Complete fitting kit included with propeller plates, adapter rings and screws.
Specifications Explained
KV rating: 460KV means the motor turns relatively slowly per volt, which suits bigger propellers that generate thrust at lower RPM. This is why the motor is specified around 11–14 inch carbon props rather than small, fast-spinning blades.
Thrust and power: Maximum thrust of 1200 g and 204 W peak power give you a clear ceiling for payload planning. The manufacturer positions it for single-rotor payloads of roughly 320–720 g, so total lift budget should be calculated across all motors.
Voltage: The 4S–6S LiPo range lets you choose a tamer 4S setup or a livelier 6S build, as long as your ESCs and prop choice are matched to the resulting current draw.
Mechanical details: The 4 mm shaft, 694ZZ bearings and 25 mm M3 four-hole bolt pattern are common sizes, which simplifies arm design and spare-part planning. Each motor weighs 72.3 g.
Compatibility and Requirements
The motor is designed for 4S–6S LiPo batteries and 11–14 inch carbon fibre propellers. It is referenced as working with MAD AMPX PRO 40A ESCs. You will need a compatible flight controller, ESCs, battery and propeller set — none of these are included. The supplied 3.5 mm bullet connectors and heat shrink let you terminate the motor leads to your ESCs.
Typical Uses
With its mid-lift thrust and low weight, the 3506 EEE suits aerial photography platforms, mapping and survey airframes, and industrial inspection drones that carry modest payloads. It is also a reasonable pick for endurance-focused builds where every gram counts.
What's in the Box
- 2 × MAD 3506 EEE Brushless Drone Motor 460KV
- 2 × Propeller plates
- 6 × Adapter rings (Ø4–6)
- 2 × 3.5 mm bullet connectors
- 6 × Heat shrink tubes
- 8 × M3×6 motor mounting screws
- 7 × M3×10 propeller screws
- 2 × MAD stickers


Quick specs
- Model No. / Name
- 3506
- Motor KV (RPM/V)
- 460 KV
- Motor Type
- Brushless Drone Motor
- Compatible LiPO Batteries
- 4S–6S
- Shaft Diameter
- 4 mm
- Max. Power (W)
- 204



















