Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pair of 400KV brushless motors rated for 6S LiPo, up to 612 W and 3400 g thrust each. They give heavy-lift UAV builds the thrust headroom needed for cinema cameras, cargo and surveillance payloads.

Key Highlights

  • 400KV windings optimised for 6S LiPo heavy-lift platforms
  • Up to 3400 g maximum thrust and 612 W per motor
  • 12-slot 24-pole design with 685ZZ and 695ZZ bearings
  • 168 g per motor with a 4 mm shaft and M3 mounting
  • Pack of two with propeller plates, adapters and connectors

Ideal For

  • Heavy-lift cinematography drone builders
  • Industrial cargo and delivery UAV teams
  • Surveillance and inspection multirotor operators
  • Enterprise UAV integrators using 6S power systems
  • Twin-rotor and large-frame airframe projects

Buying Tip

Confirm your frame arms use the 25 mm M3 motor pattern and that your build runs 6S before ordering, since these motors are specified for 6S LiPo only.

Elecvora expert review

Our verdict

A solid choice for builders who need predictable thrust from a 6S motor in a heavy-lift airframe. The paired pack and included mounting hardware reduce the extra parts you need to source.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 3400 g thrust and 612 W per motor for heavy-lift builds
  • Low 400KV wind suits large props on 6S
  • Dual bearings and 24-pole design for smooth running
  • Includes propeller plates, adapters, connectors and screws

Cons

  • Specified for 6S only, so no flexibility for other voltages
  • Requires soldering bullet connectors to your ESC leads
  • No propeller or ESC included, so those must be chosen separately

Best for

Heavy-lift cinematography and industrial UAV builds on 6S

Not ideal for

Small freestyle quads or non-6S power setups

Specifications

Motor KV (RPM/V)400 KV
Model No. / Name4014
Motor TypeBrushless Motor
Compatible LiPO Batteries6S
Shaft Diameter4 mm
Max. Power (W)612
Maximum Thrust (gm)3400
No of poles12 (24 poles)
Bearing685ZZ*1, 695ZZ ×1
Propeller Mount HolesD:12 M3×4
Motor Mount HolesD:25 M3×4
Weight (g)168(each)
Shipping Weight0.4 kg
Shipping Dimensions11 × 11 × 7 cm

What's in the box

  • 2 × MAD 4014 IPE 400KV brushless motors
  • 2 × propeller plates
  • 2 × prop adapters
  • 2 × M6 bullet adapter plates
  • 6 × 3.5 mm bullet connectors
  • 2 × Ø4–6 adapter rings
  • 6 × heat shrink tubes
  • 8 × M3×6 motor mounting screws
  • 8 × M3×8 prop adapter screws
  • 4 × M3×10 propeller screws
  • 2 × branding stickers

Frequently Asked Questions

What battery should I use with these motors?
The MAD 4014 IPE 400KV is specified for 6S LiPo batteries. Match your ESC and propeller choice to that voltage for safe, efficient operation.
How much thrust does each motor produce?
Each motor is rated to a maximum thrust of 3400 g with a maximum power of 612 W. Actual thrust depends on the propeller and setup you use.
What is included in the pack?
You get two motors plus propeller plates, prop adapters, M6 bullet adapter plates, 3.5 mm bullet connectors, Ø4–6 adapter rings, heat shrink tubes, mounting and propeller screws, and stickers.
What mounting pattern do the motors use?
Motor mounting uses a 25 mm M3 four-hole pattern, and propellers mount on a 12 mm M3 four-hole pattern. The shaft is 4 mm with adapters for larger hubs.
Do I need to solder anything?
Yes, the 3.5 mm bullet connectors are supplied loose, so you will need to solder or crimp them to your ESC leads and insulate the joints with the included heat shrink.
How should I care for these motors?
Keep them clean and dry, check the bearings periodically for play or noise, and inspect screws and prop adapters for tightness after flights.

Overview

The MAD 4014 IPE 400KV is a brushless outrunner motor aimed at industrial and enterprise UAV builds where lift and repeatability matter. Each unit is wound for 6S LiPo operation and is rated to a maximum of 612 W with 3400 g of thrust, giving designers meaningful headroom when sizing a multirotor for camera, cargo or sensor payloads. At 168 g per motor, the weight stays manageable for large airframes.

Key Features

  • 400KV, 6S-ready: a low-KV wind tuned for larger propellers on 6S packs.
  • High thrust ceiling: up to 3400 g per motor for heavy-lift configurations.
  • Smooth rotation: 12-slot, 24-pole layout paired with 685ZZ and 695ZZ bearings.
  • Standard mounting: 25 mm M3 motor holes and 12 mm M3 propeller holes.
  • 4 mm shaft: compatible with the supplied adapter rings and prop adapters.
  • Two-motor pack: enough motors for a twin-rotor layout or as spares for a larger build.

Specifications Explained

KV describes how fast the motor turns per volt, and 400KV is a low figure suited to larger propellers and 6S batteries, where torque and efficiency matter more than outright RPM. The 612 W maximum power figure and 3400 g thrust ceiling indicate the load each motor can handle in a well-matched setup. The 24-pole stator and rotor arrangement contributes to smooth, controlled response, while the two bearing sizes support the shaft at both ends. A 4 mm shaft and 12 mm M3 propeller bolt pattern keep propeller choice straightforward, and the 25 mm M3 motor pattern fits common heavy-lift arms.

Compatibility and Requirements

These motors are specified for 6S LiPo batteries. Propeller mounting uses a 12 mm M3 four-hole pattern, and motor mounting uses a 25 mm M3 four-hole pattern. The 4 mm shaft works with the included Ø4–6 adapter rings. Plan your build around 6S power and matching ESCs and propellers, and check your frame's arm pattern against the 25 mm mounting spacing before ordering.

Typical Uses

Heavy-lift cinematography airframes, industrial cargo and delivery platforms, surveillance and inspection UAVs, and other enterprise multirotors that need stable thrust from a compact motor. The pack of two suits twin-rotor designs or serves as a matched spare set.

What's in the Box

  • 2 × MAD 4014 IPE 400KV brushless motors
  • 2 × propeller plates and 2 × prop adapters
  • 2 × M6 bullet adapter plates and 6 × 3.5 mm bullet connectors
  • 2 × Ø4–6 adapter rings and 6 × heat shrink tubes
  • 8 × M3×6 motor screws, 8 × M3×8 prop adapter screws, 4 × M3×10 propeller screws
  • 2 × branding stickers

Quick specs

Motor KV (RPM/V)
400 KV
Model No. / Name
4014
Motor Type
Brushless Motor
Compatible LiPO Batteries
6S
Shaft Diameter
4 mm
Max. Power (W)
612
See all specifications