
1 / 4 · Click to enlarge
AI Summary
A pair of 650KV brushless motors built for heavy-lift and industrial drones, each delivering up to 1.5kg of thrust at just 72.3g. Optimised for 11–14 inch carbon fibre props and 4S LiPo, they offer a strong thrust-to-weight ratio for stable, efficient flight.
Key Highlights
- 650KV EEE brushless motor for 4S LiPo setups
- Up to 1.5kg max thrust per motor
- Ultra-light 72.3g per motor for high thrust-to-weight
- Optimised for 11–14 inch carbon fibre propellers
- Precision-balanced with corrosion-resistant stator
- Pack of 2 with mounting and connector hardware
Ideal For
- Heavy-lift quadcopter and hexacopter builders
- Industrial UAV operators needing reliable thrust
- Aerial cinematography rigs with 11–14 inch props
- Payload delivery drone projects
- Custom VTOL and research platforms
Buying Tip
Confirm your frame accepts D:12 M3×4 mounting and that your ESC handles at least 17.4A per motor before ordering.
Elecvora expert review
Our verdict
The MAD CO 3506 EEE 650KV offers an excellent balance of low weight and high thrust, making it a dependable choice for heavy-lift and industrial UAV builds. Its included hardware and balanced operation simplify assembly for professional projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High 1.5kg thrust from a light 72.3g motor
- Precision-balanced for low vibration
- Corrosion-resistant stator and rain-protected design
- Complete 2-pack with mounting hardware and connectors
Cons
- Limited to 4S LiPo setups
- Requires soldering bullet connectors to ESCs
- Propellers and battery not included
Best for
Heavy-lift and industrial UAV builders using 4S power and 11–14 inch props
Not ideal for
Small FPV racers or builds requiring 6S compatibility
Specifications
| Item Type | Drone motor |
|---|---|
| Model No. / Name | 3506 |
| Motor KV (RPM/V) | 650 KV |
| Motor Type | EEE brushless drone motor |
| Compatible LiPO Batteries | 4S LiPo |
| No-load current (A) | 0.5A @ 16V |
| Max Current (A) | 17.4 |
| Max Power Output (W) | 270 |
| Torque | 0.24 Nm |
| Max Thrust | 1.5 kg |
| Shaft Diameter | 4 mm |
| Bearing | 694ZZ*2 |
| Mounting Hole Diameter (mm) | D:12 M3×4 |
| Motor Size (mm) | D:42.5 × 23.8 |
| Motor diameter (mm) | 42.5 |
| Weight (g) | 72.3(Each) |
| Shipping Weight | 0.303 kg |
| Shipping Dimensions | 11 × 11 × 6 cm |
What's in the box
- 2 x MAD CO 3506 EEE brushless drone motor 650KV
- 2 x Propeller Plate
- 6 x 3.5mm Bullet Connector
- 2 x 04-6 Adapter Ring
- 6 x Heat Shrinkable Tube
- 8 x M3*6 Motor Screws
- 4 x M3*10 Propeller Screws
- 2 x Sticker
Frequently Asked Questions
What battery is recommended for these motors?
What propeller sizes work best?
How much thrust does each motor produce?
What is included in the pack?
Are these motors suitable for outdoor use?
What maintenance do these motors need?
Overview
The MAD COMPONENTS CO 3506 EEE is a 650KV brushless drone motor designed for single-axis payloads from 320g to 720g. It suits heavy-lift and industrial UAV platforms where consistent thrust and low weight matter. Each motor weighs just 72.3g yet can produce up to 1.5kg of maximum thrust, giving a high thrust-to-weight ratio for agile and stable flight.
Built for 4S LiPo batteries and 11–14 inch carbon fibre propellers, this motor is a practical choice for professional aerial photography, payload delivery and demanding industrial applications. Precision balancing and a corrosion-resistant stator help deliver smooth, vibration-free operation, while the heat-resistant magnet and rain-protected design support reliable use outdoors.
Key Features
- High thrust-to-weight ratio: 1.5kg max thrust from a 72.3g motor for responsive performance.
- Propeller-optimised: Tuned for 11–14 inch carbon fibre propellers.
- Durable construction: Corrosion-resistant stator and heat-resistant magnet for long service life.
- Smooth operation: Precision-balanced rotor and twin 694ZZ bearings reduce vibration.
- Outdoor-ready: Rain-protected design for use in varied conditions.
- Complete 2-pack: Includes propeller plates, bullet connectors, adapter rings, heat shrink, screws and stickers.
Specifications Explained
650KV means the motor spins 650 RPM per volt applied. On a 4S LiPo (about 16V), that gives a no-load speed of roughly 10,400 RPM, well matched to 11–14 inch props for efficient thrust. The 0.5A no-load current at 16V indicates low idle draw, while the 17.4A max current and 270W max power show the motor can handle demanding climbs and payloads without excess heat. 0.24 Nm torque supports quick throttle response and stable hover. The 4mm shaft and 694ZZ bearings are sized for reliable, long-lasting rotation, and the 42.5 × 23.8mm stator size fits standard mounts with D:12 M3×4 hole spacing.
Compatibility and Requirements
These motors are intended for 4S LiPo batteries and 11–14 inch carbon fibre propellers. Mounting holes are D:12 with M3×4 spacing, and the 4mm shaft accepts the included 04-6 adapter ring. Use the supplied M3×6 motor screws and M3×10 propeller screws for installation. Ensure your ESC and power system are rated for the 17.4A maximum current per motor.
Typical Uses
Ideal for aerial cinematography drones, heavy-lift quadcopters, hexacopters and octocopters, payload delivery UAVs, industrial inspection platforms, agricultural spraying and mapping drones, and custom UAV or VTOL projects.
What's in the Box
- 2 × MAD CO 3506 EEE brushless drone motors (650KV)
- 2 × Propeller plates
- 6 × 3.5mm bullet connectors
- 2 × 04-6 adapter rings
- 6 × Heat shrinkable tubes
- 8 × M3×6 motor screws
- 4 × M3×10 propeller screws
- 2 × Stickers

Quick specs
- Item Type
- Drone motor
- Model No. / Name
- 3506
- Motor KV (RPM/V)
- 650 KV
- Motor Type
- EEE brushless drone motor
- Compatible LiPO Batteries
- 4S LiPo
- No-load current (A)
- 0.5A @ 16V



















