
1 / 3 · Click to enlarge
AI Summary
A two-pack of 360KV MAD COMPONENTS 3508 IPE brushless motors, each weighing 99 g and delivering up to 1.6 kg of thrust per axis. They pair 4S–6S LiPo power with 245 W output for stable, low-vibration heavy-lift and cinematic UAV builds.
Key Highlights
- 360KV windings tuned for 4S–6S LiPo multirotor power systems
- Up to 1.6 kg thrust per axis with 245 W maximum output
- Lightweight 99 g per motor for efficient heavy-lift airframes
- 5 mm shaft and 42.5 mm diameter fit 13–16 inch propellers
- IP35-rated protection with anti-corrosive varnished wiring
- Two-motor pack includes propeller plates, connectors and screws
Ideal For
- Cinematic drone builders flying heavy camera payloads
- Industrial UAV teams working on inspection and mapping
- Agricultural drone operators running spray and crop monitoring missions
- Heavy-lift multirotor hobbyists building quad, hexa or octo frames
- R&D engineers prototyping payload-capable aircraft
Buying Tip
Count your airframe arms first: each pack contains two motors, so a quadcopter needs two packs and a hexacopter needs three.
Elecvora expert review
Our verdict
The 3508 IPE 360KV is a sensible choice for builders who need moderate thrust from a light motor and want hardware included in the box. Its 4S–6S range and 13–16 inch propeller support cover a wide spread of heavy-lift and camera airframes.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 99 g per motor with up to 1.6 kg thrust per axis
- 245 W maximum output suits camera and payload builds
- IP35 protection and anti-corrosive wiring for field work
- Two-motor pack ships with plates, connectors and screws
Cons
- Requires a suitable ESC and flight controller, which are not included
- Propellers and battery are not supplied
- IP35 protection is limited and not a substitute for keeping motors dry
Best for
Heavy-lift, cinematic and industrial multirotor builds using 13–16 inch propellers
Not ideal for
Small racing quads or builds that need high-KV motors and small propellers
Specifications
| Item Type | Drone motor |
|---|---|
| Model No. / Name | 3508 |
| Motor KV (RPM/V) | 360 KV |
| Motor Type | IPE Brushless Drone Motor |
| Compatible LiPO Batteries | 4S–6S LiPo battery |
| No-load current (A) | 0.37A @ 20V |
| Max Current (A) | 10.3 |
| Max Power Output (W) | 245 |
| Torque | 1.6 kg |
| Max Thrust | 0.277 Nm |
| Shaft Diameter | 5 mm |
| Mounting Hole Diameter (mm) | 685ZZ*1, 695ZZ*1 |
| Motor Size (mm) | D:42.5 × 30.5 |
| Motor diameter (mm) | 42.5 |
| Weight (g) | 99(Each) |
| Shipping Weight | 0.356 kg |
| Shipping Dimensions | 11 × 11 × 6 cm |
What's in the box
- 2 x MAD CO 3508 IPE Brushless Drone Motor 360KV
- 2 x Propeller Plate
- 6 x 3.5mm Bullet Connector
- 2 x 04-6 Adapter Ring
- 6 x Heat Shrinkable Tube
- 8 x M3*6 Motor Screws
- 4 x M3*10 Propeller Screws
- 2 x Sticker
Frequently Asked Questions
What battery should I use with these motors?
Which propeller sizes fit this motor?
How much thrust does each motor produce?
How many motors come in one order?
Are ESCs or a flight controller included?
How should I care for these motors?
Overview
The MAD COMPONENTS 3508 IPE is a 360KV brushless motor aimed at professional drone builders who need predictable thrust without adding unnecessary weight. At 99 g per motor, the 3508 keeps the propulsion system light while still offering up to 1.6 kg of thrust per axis and a maximum power output of 245 W. That balance makes it a practical choice for multirotors that carry cameras, sensors or spray equipment.
The motor is supplied as a pack of two, so a quadcopter build needs two packs and a hexacopter needs three. Each unit is balanced and boxed for performance and durability.
Key Features
- 360KV brushless design for 4S–6S LiPo setups on multirotor airframes.
- Up to 1.6 kg thrust per axis with a 245 W maximum power ceiling.
- Light 99 g construction that helps keep heavy-lift builds efficient.
- 5 mm shaft and 42.5 mm motor diameter for 13–16 inch carbon fibre propellers.
- IP35-rated protection and anti-corrosive varnished wire for field use.
- Complete mounting hardware included in the two-motor pack.
Specifications Explained
KV rating: 360KV describes revolutions per volt. Lower KV values suit larger propellers and higher-voltage packs, which is why this motor is intended for 4S–6S LiPo batteries and 13–16 inch propellers.
Power and current: Maximum current is 10.3 A and maximum power is 245 W, with a no-load current of 0.37 A at 20 V. These figures help you match ESCs and wiring to the load you plan to carry.
Thrust and torque: The motor is rated for up to 1.6 kg of thrust per axis and 0.277 Nm of torque, giving enough headroom for camera payloads and stabilised flight.
Dimensions: The 42.5 mm diameter and 30.5 mm height suit compact arms, while the 5 mm shaft accepts standard propeller mounting hardware.
Compatibility and Requirements
Use the 3508 with 4S–6S LiPo batteries and 13–16 inch carbon fibre propellers. The 5 mm shaft and included adapter rings help fit common propeller hubs. You will need a suitable ESC and flight controller for your airframe, plus the battery and radio system of your build. The pack includes 3.5 mm bullet connectors and heat shrink for wiring.
Typical Uses
- Cinematic drones carrying stabilised camera systems
- Industrial inspection and mapping UAVs
- Agricultural drones for spraying and crop monitoring
- Heavy-lift quad, hexa and octocopters
- R&D and prototyping platforms
What's in the Box
- 2 x MAD CO 3508 IPE Brushless Drone Motor 360KV
- 2 x propeller plate
- 6 x 3.5 mm bullet connector
- 2 x 04-6 adapter ring
- 6 x heat shrinkable tube
- 8 x M3*6 motor screw
- 4 x M3*10 propeller screw
- 2 x sticker

Quick specs
- Item Type
- Drone motor
- Model No. / Name
- 3508
- Motor KV (RPM/V)
- 360 KV
- Motor Type
- IPE Brushless Drone Motor
- Compatible LiPO Batteries
- 4S–6S LiPo battery
- No-load current (A)
- 0.37A @ 20V



















