
1 / 4 · Click to enlarge
AI Summary
A pack of two 450KV brushless motors for industrial UAVs, each delivering up to 761W and 3600 g of thrust on 6S LiPo. IP35 protection and balanced rotors keep operation smooth and reliable.
Key Highlights
- 450KV brushless motor rated for 6S LiPo batteries
- Up to 761W maximum power and 3600 g maximum thrust
- IP35 protection against dust and light rain
- Centrifugal heat dissipation for stable long-term operation
- Balanced rotor and motor for reduced vibration
- 168 g per motor with 5 mm shaft and 12-pole stator
Ideal For
- Industrial UAV operators building heavy-lift multirotors
- Aerial cinematography teams needing smooth, low-vibration thrust
- Enterprise drone builders working with hexacopters and octocopters
- Logistics and surveillance platform integrators
- Drone technicians maintaining 6S-powered professional airframes
Buying Tip
Confirm your frame's motor mount pattern (D:25, M3x4) and your propeller adapter spacing before ordering, since these motors are built for 6S systems.
Elecvora expert review
Our verdict
The CO 4014 IPE is a well-rounded 450KV motor for 6S industrial multirotors, offering strong thrust figures and sensible thermal and weather protection. Its balanced rotors and dual bearings make it a practical choice for smooth, repeatable flights.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Up to 761W and 3600 g thrust per motor
- IP35 protection and centrifugal cooling
- Balanced rotor and motor for low vibration
- Dual bearings and 5 mm shaft
- Complete accessory kit included in the two-pack
Cons
- Specified for 6S LiPo only
- ESCs and propellers are not included
- Requires soldering bullet connectors to ESC leads
Best for
Industrial and heavy-lift multirotor builds on 6S
Not ideal for
Small park flyers or low-voltage beginner setups
Specifications
| Item Type | Drone motor |
|---|---|
| Motor KV (RPM/V) | 450 KV |
| Model No. / Name | 4014 |
| Compatible LiPO Batteries | 6S |
| Shaft Diameter | 5 mm |
| Max. Power (W) | 761 |
| Maximum Thrust (gm) | 3600 |
| No of poles | 12 (24 poles) |
| Bearing | 685ZZ*1, 695ZZ ×1 |
| Propeller Mount Holes | D:12 M3×4 |
| Motor Mount Holes | D:25 M3×4 |
| Weight (g) | 168(each) |
| Shipping Weight | 0.4 kg |
| Shipping Dimensions | 11 × 11 × 7 cm |
What's in the box
- 2 x MAD CO 4014 IPE brushless motors, 450KV
- 2 x propeller plates
- 2 x prop adapters
- 2 x M6 bullet adapter plates
- 6 x 3.5 mm bullet connectors
- 2 x Ø4-6 adapter rings
- 6 x heat shrink tubes
- 8 x M3x6 motor mounting screws
- 8 x M3x8 prop adapter screws
- 4 x M3x10 propeller screws
- 2 x branding stickers
Frequently Asked Questions
What battery does this motor use?
How much thrust does each motor produce?
Is this a pack of two motors?
What are the mounting dimensions?
Does it include ESCs or propellers?
How should I care for these motors?
Overview
The MAD COMPONENTS CO 4014 IPE is a 450KV brushless motor designed for professional and enterprise UAV platforms. This listing supplies a pack of two motors, so a single order covers a complete twin-motor setup or gives you spares for a larger multirotor build. Each unit combines a Taiwan-made stator with anticorrosive varnished wire, and the housing carries IP35 protection against dust and light rain.
With a maximum power of 761W and a maximum thrust of 3600 g per motor, the CO 4014 IPE is intended for airframes that need solid lift without excessive weight. At 168 g per motor, it balances output against payload efficiency.
Key Features
- 450KV winding for 6S LiPo setups
- Up to 761W maximum power output
- 3600 g maximum thrust per motor
- IP35 protection against dust and light rain
- Centrifugal heat dissipation for stable long-term operation
- Balanced rotor and motor for smooth, low-vibration running
- Dual bearings (685ZZ and 695ZZ) for shaft support
Specifications Explained
KV rating: 450KV describes the motor's speed constant, and this winding is matched to 6S LiPo packs. Choose propellers that keep current draw within the motor's limits for your airframe.
Power and thrust: The 761W maximum power and 3600 g maximum thrust figures describe the upper end of the motor's capability. Actual figures depend on the propeller, throttle and battery you use.
Poles and bearings: The 12-pole stator (24 magnets) works with standard brushless ESCs, and the 685ZZ and 695ZZ bearings support the 5 mm shaft.
Mounting: Motor mount holes are D:25 with M3x4, and propeller mount holes are D:12 with M3x4, so check your frame and prop adapters before assembly.
Compatibility and Requirements
The CO 4014 IPE is specified for 6S LiPo batteries. It uses a 5 mm shaft and standard M3 mounting patterns as listed above. ESCs, propellers and airframes are not included and must be selected to suit your build and the motor's current draw.
Typical Uses
These motors suit quadcopters, hexacopters and octocopters used for heavy-lift cinematography, industrial logistics and surveillance work, where steady thrust and low vibration matter. The IP35 rating and centrifugal cooling help in demanding field conditions.
What's in the Box
- 2 x MAD CO 4014 IPE brushless motors, 450KV
- 2 x propeller plates
- 2 x prop adapters
- 2 x M6 bullet adapter plates
- 6 x 3.5 mm bullet connectors
- 2 x Ø4-6 adapter rings
- 6 x heat shrink tubes
- 8 x M3x6 motor mounting screws
- 8 x M3x8 prop adapter screws
- 4 x M3x10 propeller screws
- 2 x branding stickers

Quick specs
- Item Type
- Drone motor
- Motor KV (RPM/V)
- 450 KV
- Model No. / Name
- 4014
- Compatible LiPO Batteries
- 6S
- Shaft Diameter
- 5 mm
- Max. Power (W)
- 761



















