
1 / 3 · Click to enlarge
AI Summary
A 1900KV 6S FPV motor for freestyle and racing quads, featuring a titanium shaft and high-temperature magnets. Its 4.4mm shaft and 678W max power handle aggressive throttle and impact.
Key Highlights
- 1900KV wind tuned for 6S FPV freestyle and racing builds
- Titanium shaft reduces weight while adding impact strength
- 0.15mm silicon steel sheets lower energy loss for efficiency
- High-temperature magnets maintain output under sustained load
- 4.4mm shaft diameter and 678W maximum power
- Green secondary anodizing resists corrosion and looks sharp
Ideal For
- FPV freestyle pilots building 6S 5-inch quads
- Racing pilots who want fast throttle response
- Builders upgrading to a titanium-shaft motor
- Pilots who prefer a green anodized finish
- Hobbyists assembling a spare motor set
Buying Tip
Order the number of motors your build needs at once, and confirm your prop hubs and frame mounting pattern match the 4.4mm shaft and motor size before checkout.
Elecvora expert review
Our verdict
The FS 2407 SPARK 1900KV is a sensible choice for 6S freestyle and racing pilots who value a titanium shaft and heat-tolerant magnets. It is a focused motor rather than a universal one, so match it to your build and flying style.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 1900KV wind suits 6S freestyle and racing
- Titanium shaft adds strength with less weight
- High-temperature magnets support hard use
- Green anodizing resists corrosion
Cons
- Single motor only; a full build needs several
- Requires soldering and setup work
- Not intended for low-KV long-range builds
Best for
6S freestyle and racing 5-inch quads
Not ideal for
Long-range or low-KV endurance builds
Specifications
| Motor KV (RPM/V) | 2600 KV |
|---|---|
| Motor Type | FPV Motor |
| Shaft Diameter | 4.4 mm |
| Max. Power (W) | 678 |
| Maximum Thrust (gm) | 1.47 |
| No-load current (A) | 2.5 |
| No of poles | M5 Nut |
| Operating Temperature (°C) | -20°C to 80°C. |
| Shipping Weight | 0.065 kg |
| Shipping Dimensions | 5 × 5 × 4 cm |
What's in the box
- 1 x MAD CO FS 2407 SPARK FPV Drone motor (Green) 1900KV - 6S
Frequently Asked Questions
What voltage is this motor designed for?
What does 1900KV mean for my build?
What is included with the motor?
Will this motor fit my frame?
How should I care for the motor?
What is the maximum power of this motor?
Overview
The MAD CO FS 2407 SPARK is a brushless FPV motor wound to 1900KV and intended for 6S-powered freestyle and racing drones. It sits in the mid-to-high KV range for 5-inch class builds, where quick throttle response matters more than long endurance. The motor uses a titanium shaft to save weight without giving up strength, and 0.15mm silicon steel laminations to reduce energy loss in the stator. High-temperature magnets are specified so the motor can keep working during repeated hard punches and long acro sessions. A green secondary anodized finish protects the bell from corrosion and gives the motor a distinct look on the bench and in the air.
Key Features
- Titanium shaft: lower rotating mass with good resistance to bending in crashes.
- 0.15mm silicon steel sheet: thinner laminations help limit eddy-current losses and keep efficiency up.
- High-temperature magnets: designed to hold performance when the motor gets hot under load.
- Secondary anodizing: adds a corrosion-resistant layer and a clean green finish.
- 1900KV wind: a practical match for 6S freestyle and racing setups.
Specifications Explained
KV (1900KV): the motor turns faster per volt than lower-KV options, giving snappy throttle response on 6S. It is not a low-KV long-range wind, so plan your build around freestyle or racing use.
Max power (678W): this figure indicates the motor can absorb serious power during aggressive maneuvers, provided the rest of the build (ESC, battery, props) is sized to match.
Shaft diameter (4.4mm): a common size for 5-inch FPV prop mounts. Check that your prop hubs and nuts match this diameter before installing.
No-load current (2.5A): the current drawn with no prop fitted. It is a useful baseline when checking motor health or comparing units.
Operating temperature (-20°C to 80°C): the motor is rated to work across a wide ambient range. After flights, let it cool before handling or maintenance.
Compatibility and Requirements
This motor is intended for 6S FPV builds, so your battery, ESC and prop choice should be appropriate for that voltage and for a 1900KV motor. The 4.4mm shaft requires matching prop hubs and M5 nuts. Mounting hole pattern and frame compatibility are not listed in the available data, so verify them against your frame before purchase. The motor is a single unit; ESCs, props, batteries and frames are not included.
Typical Uses
Freestyle pilots who fly acro and want quick response will find the 1900KV wind at home on 6S. Racing pilots can use it where bursts of acceleration matter. It also suits pilots upgrading a 5-inch build who want a titanium shaft and high-temperature magnets in a green anodized package.
What's in the Box
1 x MAD CO FS 2407 SPARK FPV Drone motor (Green) 1900KV - 6S.
Quick specs
- Motor KV (RPM/V)
- 2600 KV
- Motor Type
- FPV Motor
- Shaft Diameter
- 4.4 mm
- Max. Power (W)
- 678
- Maximum Thrust (gm)
- 1.47
- No-load current (A)
- 2.5


















