
1 / 5 · Click to enlarge
AI Summary
This pack of four MAD XC3000 POLAR 650KV brushless motors delivers up to 2800g thrust each and supports 6S–12S LiPo. Ideal for cinematic and heavy-lift drones needing efficient, reliable power.
Key Highlights
- 650KV brushless outrunner for 6S to 12S LiPo setups
- Up to 2800g maximum thrust per motor
- Lightweight at only 70g per motor
- 14-pole design with 4mm shaft
- Peak operating temperature up to 129°C
- Pack of four motors with accessory set
Ideal For
- Cinematic drone builders needing reliable thrust
- Heavy-lift multirotor operators
- Mapping UAV professionals
- FPV pilots building larger frames
- Industrial quadcopter projects
Buying Tip
Check that your ESCs and propellers are rated for the 6S–12S voltage and the current draw at your chosen throttle range before finalizing your build.
Elecvora expert review
Our verdict
The MAD XC3000 POLAR 650KV pack offers a practical combination of low weight, high thrust, and voltage flexibility for serious multirotor builds. It is a solid choice for pilots who need dependable performance across 6S to 12S setups.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight at 70g per motor
- High maximum thrust of 2800g
- Wide 6S–12S LiPo compatibility
- Thermal resilience up to 129°C
- Pack of four simplifies procurement
Cons
- Requires soldering to ESCs
- Propellers and ESCs not included
- Optimal performance depends on correct prop selection
Best for
Cinematic and heavy-lift drone builders
Not ideal for
Small FPV racers or micro drones
Specifications
| Motor KV (RPM/V) | 650 KV |
|---|---|
| Model No. / Name | XC3000 |
| Motor Type | Brushless Outrunner |
| Compatible LiPO Batteries | 6S to 12S |
| Framework | Multirotor (Drone/UAV), Cinematic Drones, FPV/Heavy Lift |
| Shaft Diameter | 4 mm |
| Motor diameter (mm) | 35.7 |
| Max. Efficiency Current (A) | 10.33 |
| Max. Power (W) | 1330 |
| Maximum Thrust (gm) | 2800 |
| No-load current (A) | 0.6 at 10V |
| No-Load Current (mA) | 600 |
| No of poles | 14 |
| Operating Temperature (°C) | -20 to 129 |
| Motor Size (mm) | D:35.7 × 40.55 |
| Weight (g) | 70(Each) |
| Shipping Weight | 0.541 kg |
| Shipping Dimensions | 11.5 × 11.5 × 9 cm |
What's in the box
- 4 x MAD XC3000 POLAR brushless motor 650KV
- 1 x Accessory Set
Frequently Asked Questions
What LiPo battery voltage can these motors handle?
How much thrust does each motor produce?
What is included in the package?
What propeller sizes are recommended?
Do I need to solder the motor wires?
What is the operating temperature range?
Overview
The MAD XC3000 POLAR 650KV brushless motor is a compact outrunner built for multirotor platforms that require a balance of thrust, efficiency, and thermal endurance. Each motor in this four-pack weighs just 70g yet can deliver up to 2800g of maximum thrust, making it a strong candidate for medium to heavy drones. The 650KV rating and compatibility with 6S to 12S LiPo batteries allow you to configure your power system for either longer flight times or higher performance.
Key Features
- High-performance 650KV outrunner: Provides reliable power for demanding UAV applications.
- Substantial thrust: Maximum thrust of 2800g per motor supports heavy-lift and cinematic builds.
- Wide voltage range: Works with 6S to 12S LiPo batteries for flexible power setups.
- Thermal resilience: Operates in temperatures from -20°C to 129°C, with low internal resistance for reduced heat.
- Lightweight construction: At only 70g per motor, it helps keep overall weight down without sacrificing output.
- Optimized for common prop sizes: Designed for 7x4.5x3 to 10x4.5 propellers.
Specifications Explained
The 650KV rating indicates the motor will spin 650 RPM per volt applied, so with a 6S battery (22.2V nominal) you can expect around 14,430 RPM unloaded, while a 12S battery (44.4V nominal) would yield about 28,860 RPM. The 14-pole configuration contributes to smooth torque delivery and precise control. A 4mm shaft fits standard prop adapters, and the 35.7mm diameter by 40.55mm length keeps the motor compact. Maximum power is 1330W, and the no-load current is 0.6A at 10V, indicating low idle losses. The maximum efficiency current of 10.33A suggests the motor performs efficiently under typical cruising loads.
Compatibility and Requirements
These motors are compatible with 6S to 12S LiPo batteries and are intended for multirotor frameworks including cinematic drones, FPV/heavy-lift platforms, and industrial UAVs. They are optimized for propellers ranging from 7x4.5x3 to 10x4.5. Ensure your ESCs and power distribution system are rated for the voltage and current you plan to use. The 4mm shaft accepts standard prop mounts.
Typical Uses
With their high thrust-to-weight ratio and thermal tolerance, these motors suit cinematic drones that carry gimbals and cameras, mapping UAVs that require stable flight over large areas, and heavy-lift multirotors for industrial tasks. FPV builders looking for a robust 650KV option may also find them useful for larger frames.
What's in the Box
- 4 x MAD XC3000 POLAR brushless motor 650KV
- 1 x Accessory Set


Quick specs
- Motor KV (RPM/V)
- 650 KV
- Model No. / Name
- XC3000
- Motor Type
- Brushless Outrunner
- Compatible LiPO Batteries
- 6S to 12S
- Framework
- Multirotor (Drone/UAV), Cinematic Drones, FPV/Heavy Lift
- Shaft Diameter
- 4 mm



















