Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: case/package PDIP 8; max. operating current (a) 1; data rate 2.5 Mb/s.

Key Highlights

  • Case/Package: PDIP 8
  • Max. Operating Current (A): 1
  • Data Rate: 2.5 Mb/s

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Case/PackagePDIP 8
Max. Operating Current (A)1
Data Rate2.5 Mb/s
Product TypeRS-422/RS-485 Interface IC
Model SeriesMAX485
Operating Temperature (°C)0 to 70
Dimensions (L x W x H) mm9.91 x 7.87 x 4.45
Mounting TypeThrough Hole
FunctionTransceiver
No. of Drivers1 Driver
No. of Receivers1 Receiver
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MAX485CPA PDIP-8 Interface ICs is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Case/Package: PDIP 8
  • Max. Operating Current (A): 1 (your supply must deliver at least this much current)
  • Data Rate: 2.5 Mb/s
  • Product Type: RS-422/RS-485 Interface IC (confirm your cable or board uses the same connector)
  • Model Series: MAX485
  • Operating Temperature (°C): 0 to 70
  • Dimensions (L x W x H) mm: 9.91 x 7.87 x 4.45 (measure your mounting space before ordering)
  • Mounting Type: Through Hole

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MAX485 are low-power transceivers for RS-485 and RS422 communication. Each part contains one driver and one receiver.  The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.

These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers.  All parts operate from a single 5V supply. Drivers are short-circuited current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.

 

Note: Image may vary from actual product in terms of Brand according to the availability.   


Applications:

  1. Low-Power RS-485 Transceivers
  2. Low-Power RS-422 Transceivers
  3. Level Translators
  4. Transceivers for EMI-Sensitive Applications
  5. Industrial-Control Local Area Networks

 


Package Includes:

1 x MAX485CPA PDIP-8 Interface ICs

 

Quick specs

Case/Package
PDIP 8
Max. Operating Current (A)
1
Data Rate
2.5 Mb/s
Product Type
RS-422/RS-485 Interface IC
Model Series
MAX485
Operating Temperature (°C)
0 to 70
See all specifications