
1 / 6 · Click to enlarge
AI Summary
The MC34063A is a versatile SOIC-8 switching regulator IC for DC-DC buck, boost, and inverting designs. It handles 3V to 40V input and provides an adjustable 1.25V to 40V output with up to 1.5A peak current.
Key Highlights
- Wide 3V to 40V input voltage range
- Adjustable output from 1.25V to 40V
- Up to 1.5A peak output current
- SOIC-8 surface-mount package
- Internal current limit and temperature-compensated reference
- Suitable for step-down, step-up, and inverting topologies
Ideal For
- Electronics hobbyists building custom DC-DC converters
- Design engineers prototyping power supplies
- Repair technicians replacing faulty regulator ICs
- Students learning switching regulator topologies
- Makers needing a compact SOIC-8 regulator
Buying Tip
Remember that external components like the inductor, diode, and capacitors are not included, so factor those into your build.
Elecvora expert review
Our verdict
The MC34063A remains a dependable choice for simple, cost-sensitive DC-DC conversion where flexibility matters more than high efficiency. It is well-suited to prototyping and low-power designs, provided you account for its external component needs and thermal limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide input and output voltage ranges
- Integrated switch and current limiting
- Few external components required
- Low cost and widely available
Cons
- Requires external components and careful layout
- Lower efficiency than modern synchronous regulators
- Limited to 0°C to 70°C operating temperature
Best for
Hobbyists and engineers building custom step-down, step-up, or inverting supplies
Not ideal for
High-efficiency or high-temperature applications
Specifications
| Case/Package | SOIC8 |
|---|---|
| Mounting Type | SMD/SMT |
| Model Series | MC34063A |
| No. of Outputs | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Switching frequency | 100 |
| Input Voltage (V) | 3V to 40V |
| Output Voltage | 1.25 ~ 40 |
| Max. Operating Current (A) | 1.5 |
| Operating Temperature (°C) | 0 to 70 |
| Dimensions (L x W x H) mm | 5.12 x 3.11 x 1.91 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x MC34063A SOIC-8 DC-DC Buck Switching Voltage Regulator IC
Frequently Asked Questions
What external components do I need to use the MC34063A?
Can this IC be used for both step-down and step-up conversion?
What is the maximum output current?
Is the output voltage fixed or adjustable?
What is included in the package?
What operating temperature range does it support?
Overview
The MC34063A is a monolithic control circuit designed for DC-DC converter applications. Housed in an SOIC-8 surface-mount package, it integrates the primary functions needed for switching regulation: a temperature-compensated voltage reference, a comparator, an oscillator with controlled duty cycle, an active current-limit circuit, a driver, and a high-current output switch. This makes it a compact and flexible building block for a wide range of power-supply designs.
Key Features
- Wide input range: Operates from 3V to 40V, accommodating many common supply voltages.
- Adjustable output: Output voltage can be set from 1.25V to 40V using an external resistor divider.
- High peak current: The output switch is rated for up to 1.5A peak current.
- Integrated protection: Active current-limit circuitry helps safeguard the regulator and load under fault conditions.
- Low standby current: Collector off-state current is below 100 µA.
- Surface-mount package: SOIC-8 footprint suits automated assembly and compact PCB layouts.
Specifications Explained
Input voltage (3V to 40V): This is the range of supply voltages the IC can accept. Ensure your input source stays within these limits for reliable operation.
Output voltage (1.25V to 40V): The output is set by an external resistor divider, giving you flexibility to target common rails such as 3.3V, 5V, or 12V. The maximum output voltage cannot exceed the input voltage in buck mode.
Max operating current (1.5A): This is the peak current rating of the internal switch. Average output current will be lower and depends on the external components and duty cycle.
Switching frequency (100 kHz): The oscillator frequency is set externally. A higher frequency can reduce the size of external components but may increase switching losses.
Operating temperature (0°C to 70°C): The IC is rated for commercial temperature ranges, suitable for indoor and benchtop environments.
Package: SOIC-8 surface-mount device requires soldering to a PCB; it is not a through-hole part.
Compatibility and Requirements
To build a working regulator, you will need external components such as an inductor, diode, capacitors, and resistors. The exact values depend on your input voltage, output voltage, and load current. The IC is not a drop-in replacement for linear regulators; it requires a switching topology layout. A PCB or adapter board for SOIC-8 is necessary for testing.
Typical Uses
- Step-down (buck) converters for embedded systems
- Step-up (boost) converters for battery-powered devices
- Voltage-inverting supplies for op-amp circuits
- Fan controllers and small DC-DC power supplies
- Educational and prototyping projects
What's in the Box
1 x MC34063A SOIC-8 DC-DC Buck Switching Voltage Regulator IC.
Quick specs
- Case/Package
- SOIC8
- Mounting Type
- SMD/SMT
- Model Series
- MC34063A
- No. of Outputs
- 1
- Output Type
- Fixed
- Polarity
- Positive













