Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: resolution 10bit; operating temperature (°c) -40 to 85; mounting type Through Hole. Check that your power source supplies 2.7 to 5.5 before connecting it.

Key Highlights

  • Resolution: 10bit
  • Operating Temperature (°C): -40 to 85
  • Mounting Type: Through Hole

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Resolution10bit
Operating Temperature (°C)-40 to 85
Mounting TypeThrough Hole
No. of Channels8
InterfaceSPI
Supply Voltage2.7 to 5.5
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP3008 8-Channel 10-Bit A/D Converter with SPI Interface IC DIP-16 Package is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Resolution: 10bit
  • Operating Temperature (°C): -40 to 85
  • Mounting Type: Through Hole
  • No. of Channels: 8
  • Interface: SPI (confirm your cable or board uses the same connector)
  • Supply Voltage: 2.7 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Microchip Technology Inc.MCP3008 8-Channel 10-Bit devices are successive approximation 10-bit Analogto-Digital (A/D) converters with on-board sample and hold circuitry.  The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Non linearity (DNL) and Integral Non linearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol. The devices are capable of conversion rates of up to 200 ksps. The MCP3008 8-Channel 10-Bit operate over a broad voltage range (2.7V - 5.5V). Low-current design permits operation with typical standby currents of only 5 nA and typical active currents of 320 µA. The MCP3008 is offered in 16- pin PDIP and SOIC packages.

Features:

  1. 10-bit resolution
  2. ± 1 LSB max DNL
  3. ± 1 LSB max INL
  4. 8 (MCP3008) input channels
  5. Analog inputs programmable as single-ended or pseudo-differential pairs
  6.  On-chip sample and hold
  7. SPI serial interface (modes 0,0 and 1,1)
  8. Single supply operation: 2.7V - 5.5V
  9. 200 ksps max. sampling rate at VDD = 5V
  10. 75 ksps max. sampling rate at VDD = 2.7V
  11. Low power CMOS technology • 5 nA typical standby current, 2 µA max.
  12. 500 µA max. active current at 5V
  13. Industrial temp range: -40°C to +85°C

Note:
  1. Product Images are shown for illustrative purposes only and may differ from the actual product.
  2. For Technical Specifications about the IC go through the Datasheet in the Attachment section.

Package Includes:

1 x MCP3008 8-Channel 10-Bit A/D Converter with SPI Interface IC DIP-16 Package

Quick specs

Resolution
10bit
Operating Temperature (°C)
-40 to 85
Mounting Type
Through Hole
No. of Channels
8
Interface
SPI
Supply Voltage
2.7 to 5.5
See all specifications