Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; interface 3-Wire, Microwire, SPI; case/package MSOP-8. Check that your power source supplies 5 V before connecting it.

Key Highlights

  • Manufacturer: Generic
  • Interface: 3-Wire, Microwire, SPI
  • Case/Package: MSOP-8

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Resolution12 Bits
Interface3-Wire, Microwire, SPI
Case/PackageMSOP-8
Operating Supply Voltage5 V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP-8 Package is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Resolution: 12 Bits
  • Interface: 3-Wire, Microwire, SPI (confirm your cable or board uses the same connector)
  • Case/Package: MSOP-8
  • Operating Supply Voltage: 5 V (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TheMCP4821T-E/MS 12 Bit is a 1-channel 12-bit buffered voltage output Digital-to-analog Converter (DAC) that operates from a single 2.7 to 5.5V supply with an SPI compatible serial peripheral interface. The device has a high precision internal voltage reference. The user can configure the full-scale range of the device to be 2.048 or 4.096V by setting the gain selection option bit. The device can be operated in active or shutdown mode by setting a configuration register bit or using the SHDN pin. In shutdown mode, most of the internal circuits, including the output amplifier, are turned OFF for power savings, while the amplifier output (VOUT) stage is configured to present a known high resistance output load. The device includes double-buffered registers, allowing a   synchronous update of the DAC output using the LDAC pin. The device utilizes resistive string architecture with its inherent advantages of low DNL error, low ratiometric temperature coefficient, and fast settling time.

Applications:
  1.  SetPoint or Offset Trimming
  2.  Sensor Calibration
  3. Precision Selectable Voltage Reference
  4.  Portable Instrumentation (Battery-Powered)
  5.  Calibration of Optical Communication Devices

Features:

  1.  Rail-to-Rail Output
  2.  SPI Interface with 20 MHz Clock Support
  3.  Simultaneous Latching of the DAC Output with LDAC Pin
  4.  Fast Settling Time of 4.5 µs
  5.  Selectable Unity or 2x Gain Output
  6. 2.048V Internal Voltage Reference

Specifications:

  1. Analogue Supply Voltage: 2.7 V to 5.5 V
  2. Digital Supply Voltage: 2.7 V to 5.5 V
  3. Product Category: Digital to Analog Converters - DAC
  4. Resolution: 12 bit
  5. Number of Channels: 2 Channel
  6. Settling Time: 4.5 us
  7. Output Type: Voltage Buffered
  8. Interface Type: 3-Wire, Microwire, SPI
  9. Minimum Operating Temperature: - 40 C
  10. Maximum Operating Temperature: + 125 C

Package Includes:

1 x MCP4821T-E/MS 12 Bit Voltage Output Digital to Analog Converter (DAC) with SPI Interface IC DIP

Quick specs

Manufacturer
Generic
Resolution
12 Bits
Interface
3-Wire, Microwire, SPI
Case/Package
MSOP-8
Operating Supply Voltage
5 V
Shipping Weight
0.001 kg
See all specifications