Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this power management ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; case/package SSOP; no. of pins 28. Check that your power source supplies 2.8V before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • Case/Package: SSOP
  • No. of Pins: 28

Ideal For

  • Powering projects and devices
  • Spare or replacement pack
  • Portable builds

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
Case/PackageSSOP
No. of Pins28
Min Supply Voltage2.8V
Max. Supply Voltage (V)3.6V
Operating Temperature (°C)-40 to 85
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The ATM90E26-YU-R-MICROCHIP-Single-Phase Active and Apparent Energy Metering IC, 2.8 V to 3.6 V, SSOP-28, -40 °C to 85 °C, made by Microchip Technology, is listed in our power management ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • Case/Package: SSOP
  • No. of Pins: 28
  • Min Supply Voltage: 2.8V (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 3.6V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40 to 85
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

ATM90E26-YU-R is a single-phase high-performance wide-span energy metering IC. The ADC and DSP technology ensure the chip's long-term stability over variations in grid and ambient environmental conditions. The M90E26 is used for active and reactive energy metering for single-phase two-wire (1P2W), single-phase three-wire (1P3W), or anti-tampering energy meters. With the measurement function, the M90E26 can also be used in power instruments that need to measure voltage, current, etc. Metering features fully in compliance with the requirements of IEC62052-11, IEC62053-21, and IEC62053-23; applicable in class 1 or class 2 single-phase watthour meter or class 2 single-phase var-hour meter.


Features:

  1. Accuracy of 0.1% for active energy and 0.2% for reactive energy over a dynamic range of 5000:1
  2. Temperature coefficient is 15ppm/ °C (typical) for on-chip reference voltage
  3. Energy meter constant doubling at low current to save verification time
  4. Programmable start-up and no-load power threshold
  5. Built-in hysteresis for power-on reset
  6. Programmable voltage sag detection and zero-crossing output
  7. Support L line and N line offset compensation
  8. Crystal oscillator frequency is 8.192MHz
  9. SSOP28 package, industrial temperature range from -40°C to +85°C

Package Includes:

1 x ATM90E26-YU-R-MICROCHIP-Single-Phase Active and Apparent Energy Metering IC, 2.8 V to 3.6 V, SSOP-28, -40 °C to 85 °C

Quick specs

Manufacturer
Microchip Technology
Case/Package
SSOP
No. of Pins
28
Min Supply Voltage
2.8V
Max. Supply Voltage (V)
3.6V
Operating Temperature (°C)
-40 to 85
See all specifications