Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; no. of pins 18; supply voltage 2.7V to 5.5V. Check that your power source supplies 2.7V to 5.5V before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • No. of Pins: 18
  • Supply Voltage: 2.7V to 5.5V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
No. of Pins18
Supply Voltage2.7V to 5.5V
Operating Temperature (°C)-40 to 125
Case/PackageSOIC
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP2515-E/SO-MICROCHIP-CAN Interface, Controller, CAN Controller, SPI, 1 Mbps, 2.7 V, 5.5 V, SOIC, 18 Pins, made by Microchip Technology, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • No. of Pins: 18
  • Supply Voltage: 2.7V to 5.5V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40 to 125
  • Case/Package: SOIC
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MCP2515-E/SO is a stand-alone controller area network (CAN) Controller that implements the CAN specification, version 2.0B. It is capable of transmitting and receiving both standard and extended data and remote frames. The MCP2515 has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCU's overhead. The MCP2515 interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI). The device consists of three main blocks, that is CAN module, which includes the CAN protocol engine, masks, filters, transmit and receive buffers. The control logic and registers that are used to configure the device and its operation and the SPI protocol block.

Specifications:

No. of Receivers: 2Receivers IC Case / Package: SOIC Supply Voltage Min: 2.7V Operating Temperature Min: -40°C No. of Pins: 18Pins No. of Drivers: 3Drivers CAN Interface IC Type: CAN Controller, SPI Product Range: Multicomp Pro RJ45 Adapter Supply Voltage Max: 5.5V Data Rate Max: 1Mbps No. of Channels: 1Channels Operating Temperature Max: 125°C

Package Includes:

1 x MCP2515-E/SO-MICROCHIP-CAN Interface, Controller, CAN Controller, SPI, 1 Mbps, 2.7 V, 5.5 V, SOIC, 18 Pins

Quick specs

Manufacturer
Microchip Technology
No. of Pins
18
Supply Voltage
2.7V to 5.5V
Operating Temperature (°C)
-40 to 125
Case/Package
SOIC
Shipping Weight
0.001 kg
See all specifications