Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; min supply voltage 4.5V; max. supply voltage (v) 5.5V. Check that your power source supplies 4.5V before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • Min Supply Voltage: 4.5V
  • Max. Supply Voltage (V): 5.5V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
Min Supply Voltage4.5V
Max. Supply Voltage (V)5.5V
No. of Pins8
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP2561-E/P-MICROCHIP-CAN Interface, Transceiver, CAN Transceiver, 1 Mbps, 4.5 V, 5.5 V, PDIP, 8 Pins, made by Microchip Technology, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • Min Supply Voltage: 4.5V (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 5.5V (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 8
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MCP2561-E/P is a high-speed CAN Transceiver that serves as the interface between a CAN protocol controller and the physical bus. The MCP2561 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898-5 standard. It will operate at speeds of up to 1Mb/s. Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources. It has under-voltage detection on both supply pins: VDD and VIO. Typical under-voltage thresholds are 1.2V for VIO and 4V for VDD. When the device is powered on, CANH and CANL remain in a high-impedance state until both VDD and VIO exceed their under-voltage levels.


Specifications:

CAN Interface IC Type: CAN Transceiver Data Rate Max: 1Mbps Supply Voltage Min: 4.5V Supply Voltage Max: 5.5V IC Case / Package: PDIP No. of Pins: 8Pins No. of Channels: 1Channels No. of Drivers: 1Drivers No. of Receivers: 1Receivers Operating Temperature Min: -40°C Operating Temperature Max: 125°C Product Range: Multicomp Pro RJ45 Adapter

Package includes:

1 x MCP2561-E/P-MICROCHIP-CAN Interface, Transceiver, CAN Transceiver, 1 Mbps, 4.5 V, 5.5 V, PDIP, 8 Pins

Quick specs

Manufacturer
Microchip Technology
Min Supply Voltage
4.5V
Max. Supply Voltage (V)
5.5V
No. of Pins
8
Shipping Weight
0.001 kg
Shipping Dimensions
1 × 1 × 1 cm
See all specifications