Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; resolution 10bit; sample rate 200kSPS. Check that your power source supplies 2.7 before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • Resolution: 10bit
  • Sample Rate: 200kSPS

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
Resolution10bit
Sample Rate200kSPS
ChannelsPseudo Differential| Single Ended
InterfaceSPI, Serial
Min Supply Voltage2.7
Max. Supply Voltage (V)5.5
Case/PackageSOIC
No. of Pins16
Operating Temperature (°C)-40 to 85℃
Product RangeOctal 10-Bit SAR ADCs
StandardAEC-Q100
MSLMSL 1 - Unlimited
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP3008-I/SL MICROCHIP Analogue to Digital Converter, Octal, 10 bit, 200 kSPS, Pseudo Differential, Single Ended, made by Microchip Technology, is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • Resolution: 10bit
  • Sample Rate: 200kSPS (your supply must deliver at least this much current)
  • Channels: Pseudo Differential| Single Ended
  • Interface: SPI, Serial (confirm your cable or board uses the same connector)
  • Min Supply Voltage: 2.7 (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: SOIC

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MCP3008-I/SL is an 8-channel, 10-bit Analogue to Digital (ADC) Converter with an SPI interface in 16 16-pin SOIC package. This ADC combines high performance and low power consumption in a small package making it ideal for embedded control applications. The MCP3008 features successive approximation register (SAR) architecture with onboard sample and hold circuitry allowing 10bit ADC capability to be added to any PIC microcontroller. It is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential nonlinearity (DNL) and integral nonlinearity (INL) are specified at ±1LSB. Communication with devices is accomplished using a simple serial interface compatible with SPI protocol. Low current design permits operation with typical standby currents of only 5nA (2µA maximum) and typical active currents of 320µA (500µA maximum).
Applications:

Signal Processing, Test & Measurement, Sensing & Instrumentation, Industrial, Motor Drive & Control, Robotics, Automation & Process Control, Portable Devices, Medical, Automotive


Features:

  1. Analogue inputs programmable as single-ended or pseudo-differential pairs
  2. Single supply operation from 2.7V to 5.5V
  3. The maximum sampling rate is 200KSPS at VDD=5V
  4. The maximum sampling rate is 75KSPS at VDD=2.7V
  5. Low-power CMOS technology
  6. Industrial temperature ranges from -40°C to 85°C

Package Includes:

1 x MCP3008-I/SL MICROCHIP Analogue to Digital Converter, Octal, 10 bit, 200 kSPS, Pseudo-Differential, Single Ended

Quick specs

Manufacturer
Microchip Technology
Resolution
10bit
Sample Rate
200kSPS
Channels
Pseudo Differential| Single Ended
Interface
SPI, Serial
Min Supply Voltage
2.7
See all specifications