Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; resolution 16bit; sample rate 15SPS. Check that your power source supplies 2.7 before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • Resolution: 16bit
  • Sample Rate: 15SPS

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
Resolution16bit
Sample Rate15SPS
ChannelsDifferential
InterfaceI2C
Min Supply Voltage2.7
Max. Supply Voltage (V)5.5
Case/PackageSOIC
No. of Pins14
Operating Temperature (°C)-40 to 125°C
Product RangeQuad 16-Bit Sigma-Delta ADCs
MSLMSL 1 - Unlimited
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP3428-E/SL MICROCHIP Analogue to Digital Converter, Programmable, 16 bit, 15 SPS, Differential, I2C, Single, 2.7 V, made by Microchip Technology, is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • Resolution: 16bit
  • Sample Rate: 15SPS (your supply must deliver at least this much current)
  • Channels: Differential
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Min Supply Voltage: 2.7 (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: SOIC

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MCP3428-E/SL is a 4-channel 16-bit Analogue-to-digital Converter (ADC) with I²C™ interface and on-board reference. The onboard precision 2.048V reference voltage enables an input range of ±2.048V differentially. The device uses a two-wire I²C™ compatible serial interface and operates from a single power supply ranging from 2.7 to 5.5V. This device can output analog-to-digital conversion results at rates of 240 (12-bit mode) samples per second depending on the user-controllable configuration bit settings using the two-wire I²C serial interface. During each conversion, the device calibrates offset and gain errors automatically. This provides accurate conversion results from conversion to conversion over variations in temperature and power supply fluctuation.
Applications:

Sensing & Instrumentation, Consumer Electronics, Test & Measurement, Automation & Process Control, Portable Devices, Industrial.

Note: For more technical details go through Datasheet in the attachment section.

Features:

  1. A 4-channel differential input operation
  2. Supports I²C™ serial interface with user-configurable addresses
  3. On-board voltage reference with 15ppm/°C drift
  4. On-board PGA, gains of 1/2/4/8
  5. 135µA at 3V Low current consumption

Package Includes:

1 x MCP3428-E/SL MICROCHIP Analogue to Digital Converter, Programmable, 16 bit, 15 SPS, Differential, I2C, Single, 2.7 V

Quick specs

Manufacturer
Microchip Technology
Resolution
16bit
Sample Rate
15SPS
Channels
Differential
Interface
I2C
Min Supply Voltage
2.7
See all specifications