Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Microchip Technology, this adc & dac converter ic is a good fit for everyday home and hobby use. Main specs: manufacturer Microchip Technology; resolution 12bit; interface Serial, 3 Wire. Check that your power source supplies 2.7 to 5.5 before connecting it.

Key Highlights

  • Manufacturer: Microchip Technology
  • Resolution: 12bit
  • Interface: Serial, 3 Wire

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerMicrochip Technology
Resolution12bit
InterfaceSerial, 3 Wire
Supply Voltage2.7 to 5.5
No. of Pins8
Input Channel TypeSerial
Operating Temperature (°C)-40 to 125
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MCP4921-E/P-MICROCHIP-Digital to Analogue Converter, 12 bit, 3 Wire, Serial, 2.7V to 5.5V, DIP, 8 Pins, made by Microchip Technology, is listed in our adc & dac converter ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Microchip Technology
  • Resolution: 12bit
  • Interface: Serial, 3 Wire (confirm your cable or board uses the same connector)
  • Supply Voltage: 2.7 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 8
  • Input Channel Type: Serial
  • Operating Temperature (°C): -40 to 125
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MCP4921-E/P is a single channel, 12bit voltage output digital to analogue converter with SPI interface in 8 pin DIP package. User can configure the full scale range of device to be VREF or 2*VREF by setting gain selection option bit (gain of 1 of 2). Device can be configured to shutdown with the use of register bit. In shutdown mode, most of internal circuits are turned off for power savings and output amplifier is configured to present a known high resistance output load (typically 500Kohm). The MCP4921 also incorporate power on reset (POR) circuit to ensure reliable power-up. It utilizes resistive string architecture with its inherent advantages of low differential non linearity (DNL) error and fast settling time.

Features:

  1. Rail to rail output
  2. SPI interface with 20MHz clock support
  3. Simultaneous latching of DAC output
  4. Fast settling time of 4.5μs
  5. Selectable unity or 2 x gain output
  6. External voltage reference input
  7. Single supply operation from 2.7V to 5.5V
  8. Operating temperature range from -40°C to 125°C
  9. External multiplier mode

Package Includes:

1 x MCP4921-E/P-MICROCHIP-Digital to Analogue Converter, 12 bit, 3 Wire, Serial, 2.7V to 5.5V, DIP, 8 Pins

Quick specs

Manufacturer
Microchip Technology
Resolution
12bit
Interface
Serial, 3 Wire
Supply Voltage
2.7 to 5.5
No. of Pins
8
Input Channel Type
Serial
See all specifications