Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This compact ENC28J60 module adds wired Ethernet to Arduino, PIC, AVR, and STM32 projects via SPI. It integrates a 10Base-T PHY, MAC, and 25MHz crystal on a small 52 x 20 mm board.

Key Highlights

  • Adds wired Ethernet to microcontrollers via SPI interface
  • Based on Microchip ENC28J60 Ethernet controller IC
  • Integrated MAC and 10Base-T PHY for network protocol handling
  • SPI clock speeds up to 20 MHz for fast communication
  • 25MHz crystal and HR911105A RJ45 jack on board
  • Compact 52 x 20 mm board weighs only 20 g

Ideal For

  • Arduino enthusiasts adding wired networking
  • PIC and AVR developers building networked devices
  • STM32 users needing a compact Ethernet interface
  • Students learning embedded networking protocols
  • Makers prototyping IoT sensor nodes

Buying Tip

Confirm your microcontroller operates at 3.3 V logic or use level shifters, as the module’s SPI and power pins are not 5 V tolerant.

Elecvora expert review

Our verdict

The Mini ENC28J60 module is a reliable and compact solution for adding wired Ethernet to SPI-capable microcontrollers. It offers a straightforward integration path for hobbyists and professionals alike, though users must pay attention to the 3.3 V power requirement.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact size fits tight spaces
  • SPI interface simplifies connection to many microcontrollers
  • Integrated MAC and PHY reduce external component count
  • On-board crystal and RJ45 jack with magnetics

Cons

  • Requires 3.3 V power and logic levels
  • No cables or headers included
  • Limited to 10Base-T speeds

Best for

Adding basic wired networking to Arduino and other microcontroller projects

Not ideal for

High-speed networking or applications requiring gigabit speeds

Specifications

Model No. / NameEthernet Module
Length (mm)52
Width (mm)20
Weight (g)20
Shipping Weight0.022 kg
Shipping Dimensions6 × 3 × 2.5 cm

What's in the box

  • 1 x Mini ENC28J60 Ethernet LAN Network Module

Frequently Asked Questions

Can I use this module with a 5V Arduino?
The module operates at 3.3 V, so you should use level shifters on the SPI lines if your Arduino uses 5 V logic. Powering the module from 5 V may damage it.
What microcontrollers are compatible?
It works with any microcontroller that has an SPI interface, including Arduino, PIC, AVR, LPC, and STM32.
Does the module come with cables or headers?
No, the package includes only the module. You will need to provide your own wires or headers for connection.
What is the maximum SPI speed?
The SPI interface supports clock speeds up to 20 MHz.
What is the network speed?
The module supports 10Base-T Ethernet, which operates at 10 Mbps.
How do I power the module?
Supply 3.3 V to the power pin and connect ground to your microcontroller’s ground.

Overview

The Mini ENC28J60 Ethernet LAN Network Module is a stand-alone Ethernet controller board designed to give any SPI-equipped microcontroller a wired network interface. At its core is the Microchip ENC28J60, a popular Ethernet controller IC that integrates an IEEE 802.3 compliant MAC and a 10Base-T PHY. This means the module handles the essential network protocol requirements, allowing your host controller to focus on application logic. The board is compact, measuring 52 mm in length and 20 mm in width, and weighs just 20 g, so it fits easily into small enclosures or prototyped setups. It connects directly to most microcontrollers through the SPI protocol, making it a practical choice for projects based on Arduino, PIC, AVR, LPC, or STM32.

Key Features

  • Fully compatible with 10/100/1000Base-T networks
  • Integrated MAC and 10Base-T PHY
  • Supports one 10Base-T port with automatic polarity detection and correction
  • Full and half-duplex modes supported
  • Programmable automatic retransmit on collision
  • Programmable automatic rejection of erroneous packets
  • SPI interface with clock speeds up to 20 MHz
  • On-board 25 MHz crystal
  • Programmable padding and CRC generation
  • HR911105A network interface jack
  • 3.3 V power supply pin

Specifications Explained

The module’s 10Base-T PHY means it operates at 10 Mbps over twisted-pair cabling, which is more than adequate for typical embedded networking tasks such as sending sensor data or serving small web pages. The integrated MAC handles frame formatting and error checking, while the SPI interface provides a simple serial connection to your microcontroller. With SPI clock speeds up to 20 MHz, data transfer between the host and the module is responsive. The 25 MHz crystal ensures reliable timing for the Ethernet controller. The HR911105A jack includes integrated magnetics and LEDs, simplifying board design and status monitoring. Power is supplied through a 3.3 V pin, so ensure your host board can provide a stable 3.3 V supply.

Compatibility and Requirements

This module is intended for microcontrollers that support SPI communication. It is commonly used with Arduino boards, as well as PIC, AVR, LPC, and STM32 families. The module requires a 3.3 V power source and logic levels; if your microcontroller operates at 5 V, you may need level shifting to avoid damage. No additional components are required for basic operation, but you will need to connect the SPI lines (MOSI, MISO, SCK, CS) and power (3.3 V and GND) to your host controller. The module does not include cables or headers, so you will need to provide your own wiring or soldering.

Typical Uses

  • Adding Ethernet connectivity to Arduino projects
  • Building networked sensor nodes
  • Remote data logging over a wired network
  • Creating web-enabled control devices
  • Prototyping IoT applications with PIC, AVR, or STM32

What's in the Box

Package includes: 1 x Mini ENC28J60 Ethernet LAN Network Module.

Quick specs

Model No. / Name
Ethernet Module
Length (mm)
52
Width (mm)
20
Weight (g)
20
Shipping Weight
0.022 kg
Shipping Dimensions
6 × 3 × 2.5 cm
See all specifications