Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This logic ic is a good fit for everyday home and hobby use. Main specs: ic type Other IC; case/package QFN 24; mounting type SMD/SMT. Check that your power source supplies 3.46 before connecting it.

Key Highlights

  • IC Type: Other IC
  • Case/Package: QFN 24
  • Mounting Type: SMD/SMT

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

IC TypeOther IC
Case/PackageQFN 24
Mounting TypeSMD/SMT
Sensitivity (dBm)340 LSB/C
Sensor Type6-axis
Sensing AxisX, Y, Z
Acceleration (g)10000
Interface TypeI2C
Output TypeDigital
Max. Supply Voltage (V)3.46
Min Supply Voltage2.375
Max. Operating Current (A)3.9
Operating Temperature (°C)-40 to 105
Dimensions (L x W x H) mm4x4x0.9
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC is listed in our logic ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • IC Type: Other IC
  • Case/Package: QFN 24
  • Mounting Type: SMD/SMT
  • Sensitivity (dBm): 340 LSB/C
  • Sensor Type: 6-axis
  • Sensing Axis: X, Y, Z
  • Acceleration (g): 10000
  • Interface Type: I2C (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC incorporates InvenSense's MotionFusion and run-time calibration firmware that enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices in motion-enabled products, and guarantees that sensor fusion algorithms and calibration procedures deliver optimal performance for consumers.
.The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on discrete parts. The parts’ integrated 9-axis MotionFusion algorithms can even access external magnetometers or other sensors through an auxiliary master I2C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.
For precision tracking of both fast and slow motions, the MPU-6050 features a user-programmable gyro full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.
NOTE: This product is available in two different dimensions. We'll ship this according to it's availability.

Features: 

  1. User-programmable digital filters for gyroscope, accelerometer, and temp sensor
  2. Digital-output temperature sensor
  3. Auxiliary master I2C bus for reading data from external sensors
  4. Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
  5. MEMS structure hermetically sealed and bonded at the wafer level
  6. 400kHz fast mode I2C for communicating with all registers
  7. Applications: Consumer Electronics, Sensing & Instrumentation, Automation & Process Control, System Monitoring, Robotics.
  8. Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  9. Tri-Axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g and ±16g
  10. Reduced settling effects and sensor drift by the elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
  11. 9-Axis Digital Motion Processing (DMP) engine offloads complex MotionFusion, sensor timing synchronization and gesture detection
  12. Embedded algorithms for run-time bias and compass calibration. No user intervention required
  13. Digital-output temperature sensor
  14. Digital input on FSYNC pin to support video Electronic Image Stabilization and GPS Programmable interrupt supports gesture recognition, panning, zooming, scrolling, free fall interrupt, high-G interrupt, zero-motion detection, tap detection, and shake detection
  15. VDD Supply voltage range of 2.375V–3.46V
  16. VLOGIC at 1.8V±5% or VDD
  17. On-chip timing generator with ±1% frequency variation over the full temperature range
  18. 10,000g shock tolerant.

Package Includes:

1 x MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC

Quick specs

IC Type
Other IC
Case/Package
QFN 24
Mounting Type
SMD/SMT
Sensitivity (dBm)
340 LSB/C
Sensor Type
6-axis
Sensing Axis
X, Y, Z
See all specifications