
1 / 3 · Click to enlarge
AI Summary
This compact red line laser module projects a straight line and runs on 3-6V DC with an adjustable focus ring. Its 6mm body and 13cm cable make it easy to integrate into Arduino and sensor projects.
Key Highlights
- Projects a straight red line, not a dot, for alignment and scanning
- Adjustable focus ring controls line intensity on different surfaces
- Wide 3-6V DC input works with common microcontroller supplies
- Compact 6mm diameter and 36mm length fit tight enclosures
- Pre-wired 13cm cable with red anode and black cathode
- Lightweight 10g module for portable and mounted setups
Ideal For
- Makers building Arduino-based laser sensors or harps
- DIY enthusiasts needing a straight line reference for alignment
- Students and educators demonstrating optics and light
- Hobbyists adding a visible guide line to scanning rigs
Buying Tip
Confirm your power source stays within 3-6V DC and always wear appropriate laser safety goggles when the module is powered.
Elecvora expert review
Our verdict
A practical low-power line laser module for hobbyist and educational projects that need a visible straight line. It is compact, easy to wire, and offers adjustable focus, though it requires a suitable power source and careful eye safety.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Straight line output with adjustable focus
- Wide 3-6V DC input range
- Compact 6mm body and lightweight 10g
- Pre-wired 13cm cable simplifies connection
- Works across -10 to 40°C
Cons
- Requires a separate 3-6V DC power source
- Not waterproof or weather-sealed
- Emits a line, not a spot, which may not suit all applications
Best for
DIY electronics and alignment projects needing a visible red line
Not ideal for
Outdoor or wet environments without additional protection
Specifications
| Item Type | Laser Module |
|---|---|
| Operating Temperature (°C) | -10 to 40 |
| Cable Length | 13 |
| Length (mm) | 36 |
| Width (mm) | 12 (Body Diameter) |
| Weight (g) | 10 |
| Operating Voltage (VDC) | 3 ~ 6 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 10 × 6 × 6 cm |
What's in the box
- 1 x MXD1230 650nm 5mW Red Straight Line Laser Module
Frequently Asked Questions
What power supply does this laser module need?
Does this module emit a dot or a line?
Can I adjust the focus?
What is included in the package?
Is it safe to look at the laser beam?
What are the red and black wires for?
Overview
The MXD1230 is a red straight line laser module designed for projects that need a visible reference line rather than a single point. It emits a 650nm red beam at 5mW and uses a lens to shape the output into a straight line. The focus ring can be turned to adjust line intensity, which helps when working at different distances or on surfaces with varying reflectivity.
With a 12mm body diameter, 36mm length, and 10g weight, the module is small enough to mount in tight spaces. It operates from 3 to 6 VDC and comes with a 13cm two-wire cable: red for anode and black for cathode. The module is rated for -10 to 40°C, making it suitable for indoor and sheltered outdoor use.
Key Features
- Straight line output: The lens produces a line instead of a spot, useful for alignment and scanning tasks.
- Adjustable focus: Turn the lens ring to change line intensity for your working distance.
- Flexible power input: Accepts 3-6V DC, so it can run from common development boards or battery packs within that range.
- Compact and light: 6mm diameter body and 10g weight simplify mounting.
- Pre-wired connection: 13cm cable with clear anode and cathode wires saves preparation time.
Specifications Explained
Wavelength (650nm): This is in the red part of the visible spectrum, so the line appears red to the eye. Output power (5mW): This is a low-power class suitable for visible alignment indoors, but eye protection is still required. Operating voltage (3-6V DC): The module needs a DC supply within this range; do not exceed 6V. Body diameter (12mm) and length (36mm): These dimensions determine the mounting space needed. Cable length (13cm): Gives some flexibility when routing to a power source. Operating temperature (-10 to 40°C): Keep the module within this range for reliable operation.
Compatibility and Requirements
The module requires a DC power supply between 3 and 6 volts. It can be connected to microcontroller boards or battery holders that provide this voltage. The red wire is the anode (positive) and the black wire is the cathode (negative). No driver board is included; you supply the power source. The module does not emit a red spot—it projects a straight line. It is not waterproof or weather-sealed.
Typical Uses
- Laser line reference for DIY alignment and positioning tasks
- Sensor projects, such as laser tripwires or beam-break detectors
- Arduino-based instruments, including laser harps and scanners
- Adding a visible guide line to small robotic or scanning setups
- Educational demonstrations of optics and light
What's in the Box
1 x MXD1230 650nm 5mW Red Straight Line Laser Module
Quick specs
- Item Type
- Laser Module
- Operating Temperature (°C)
- -10 to 40
- Cable Length
- 13
- Length (mm)
- 36
- Width (mm)
- 12 (Body Diameter)
- Weight (g)
- 10
















