Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact, soldered Nano board with an ATmega328 MCU and CH340 USB-serial chip, offering 22 digital I/O pins and 6 PWM outputs at 5V. Its small 45 x 18 x 5 mm footprint makes it a practical choice for breadboard prototypes and space-limited builds.

Key Highlights

  • ATmega328 microcontroller with 32KB flash, 2KB SRAM and 1KB EEPROM
  • 22 digital I/O pins, 6 PWM outputs and 8 analog inputs
  • 16MHz clock speed with 5V operating voltage
  • Accepts 7-12V input and up to 40mA per I/O pin
  • Compact 45 x 18 x 5 mm blue board, breadboard friendly
  • Soldered and ready to use; Mini-B USB cable not included

Ideal For

  • Makers building compact breadboard prototypes
  • Students learning microcontroller programming
  • Hobbyists creating small sensor and automation projects
  • Designers needing a space-saving ATmega328 board
  • Anyone comfortable sourcing a Mini-B USB cable separately

Buying Tip

Check that you have a Mini-B USB cable and, if needed, CH340 drivers installed before your first upload.

Elecvora expert review

Our verdict

A practical, low-cost Nano-format board for breadboard work and compact projects. It covers the essentials well, provided you supply your own Mini-B cable and install CH340 drivers where required.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 45 x 18 x 5 mm footprint fits breadboards and small enclosures
  • 22 digital I/O, 6 PWM and 8 analog inputs cover most small projects
  • Soldered and ready to use out of the box
  • Accepts 7-12V input for flexible powering

Cons

  • Mini-B USB cable is not included
  • CH340 drivers may be required on some computers
  • Clone board with no official warranty or firmware support

Best for

Compact ATmega328 prototypes and learning projects

Not ideal for

Projects needing official board support or included cabling

Specifications

Item TypeSoldered, Development Board
Board TypeNano
With Cable (Y/N)N
Chip TypeCH340
Clock Frequency16
DC Current per I/O Pin (mA)40
Digital I/O Pins22
EEPROM1KB
Flash Memory32 KB
Input Voltage (V)7-12 V
MicrocontrollerATmega328
Operating Voltage (VDC)5
Power Consumption (W)1
PWM Output Pins6
SRAM2
Weight (g)8
ColorBlue
Model No. / NameNano
Dimensions (L x W x H) mm45x18x5
Shipping Weight0.012 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x Nano CH340 Chip Board without USB cable (Soldered)

Frequently Asked Questions

What microcontroller does this board use?
It uses an ATmega328 microcontroller with 32KB flash, 2KB SRAM and 1KB EEPROM.
Is a USB cable included?
No. The package contains the soldered board only, so you need a Mini-B USB cable for programming.
What input voltage does it accept?
The board operates at 5V and accepts 7-12V input. Each I/O pin is rated for 40mA.
Why is my computer not detecting the board?
Some computers need CH340 drivers installed first. If uploading still fails, the bootloader may need to be flashed.
Is the board compatible with the Arduino IDE?
Yes, it is compatible with the Arduino environment. Select the Nano board entry and the correct serial port before uploading.
How should I power it in a standalone project?
Use a 7-12V supply on the input or a regulated 5V supply on the appropriate pin, keeping within the stated voltage range.

Overview

The Nano CH340 Chip Board is a small development board built around the ATmega328 microcontroller. It brings the core functionality of a larger Uno-style board into a compact 45 x 18 x 5 mm blue PCB, making it easy to drop into breadboards and tight enclosures. The board is supplied soldered, so no header assembly is required before you start prototyping.

A CH340 USB-serial chip handles programming and serial communication, which keeps the board affordable. The trade-off is that some computers need CH340 drivers installed before the board is recognised.

Key Features

  • ATmega328 MCU with 32KB flash, 2KB SRAM and 1KB EEPROM
  • 22 digital I/O pins, including 6 PWM outputs
  • 8 analog inputs for sensors and measurement
  • 16MHz clock with 5V operating voltage
  • 7-12V input voltage and 40mA DC current per I/O pin
  • Standard 0.1 inch pin spacing for breadboard use
  • Mini-B USB port for programming and serial monitoring

Specifications Explained

Flash, SRAM and EEPROM: 32KB of flash stores your sketches, 2KB of SRAM handles runtime data, and 1KB of EEPROM keeps small values such as settings or calibration data after power-off.

Digital and PWM pins: With 22 digital I/O pins and 6 PWM outputs, the board can drive LEDs, read buttons, control small servos and generate variable-duty signals for motor or lighting control.

Power: The board runs at 5V and accepts 7-12V input. Each I/O pin is rated for 40mA, so use a driver stage for motors, relays or high-power LEDs rather than powering them directly.

Clock speed: The 16MHz clock is the standard rate for this class of board, so timing-sensitive sketches behave predictably.

Compatibility and Requirements

The board is compatible with the Arduino environment and uses a Mini-B USB connection for programming and serial monitoring. A Mini-B USB cable is not included. On some PCs and laptops, CH340 drivers must be installed before the port appears. If the board is not detected or code upload fails, a bootloader may need to be flashed.

Typical Uses

  • Breadboard prototypes and compact sensor nodes
  • Learning electronics, coding and microcontroller basics
  • Small automation, timing and control projects
  • Wearable and space-limited builds
  • Data logging with external sensors and storage

What's in the Box

1 x Nano CH340 Chip Board without USB cable, soldered.

Quick specs

Item Type
Soldered, Development Board
Board Type
Nano
With Cable (Y/N)
N
Chip Type
CH340
Clock Frequency
16
DC Current per I/O Pin (mA)
40
See all specifications