Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NEXPERIA, this logic ic is a good fit for everyday home and hobby use. Main specs: manufacturer Nexperia; ic type Flip Flop, Flip Flops; case/package TSSOP-20, TSSOP. Check that your power source supplies 2V~6V before connecting it.

Key Highlights

  • Manufacturer: Nexperia
  • IC Type: Flip Flop, Flip Flops
  • Case/Package: TSSOP-20, TSSOP

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerNexperia
IC TypeFlip Flop, Flip Flops
Case/PackageTSSOP-20, TSSOP
Operating Temperature (°C)-40 to 125, -40 ~ 125
Supply Voltage2V~6V
Quiescent Current8uA
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The 74HC574PW,118-NEXPERIA-Flip-Flop, Tri State Non Inverted, Positive Edge, 74HC574, D, 123 MHz, 35 mA, TSSOP, made by NEXPERIA, is listed in our logic ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Nexperia
  • IC Type: Flip Flop, Flip Flops
  • Case/Package: TSSOP-20, TSSOP
  • Operating Temperature (°C): -40 to 125, -40 ~ 125
  • Supply Voltage: 2V~6V (match this to your power supply; too high a voltage can damage the part)
  • Quiescent Current: 8uA (your supply must deliver at least this much current)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The 74HC574PW is an 8-bit positive-edge triggered D-type Flip-flop with 3-state outputs. The device features a clock and OE inputs. The flip-flops will store the state of their D-inputs that meet the set-up and hold time requirements on the low-to-high clock transition. A high on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current-limiting resistors to interface inputs to voltages over VCC.


Features:

  1. Complies with JEDEC standard no. 7A
  2. CMOS Input levels

Package Includes:

1 x 74HC574PW,118-NEXPERIA-Flip-Flop, Tri State Non Inverted, Positive Edge, 74HC574, D, 123 MHz, 35 mA, TSSOP

Quick specs

Manufacturer
Nexperia
IC Type
Flip Flop, Flip Flops
Case/Package
TSSOP-20, TSSOP
Operating Temperature (°C)
-40 to 125, -40 ~ 125
Supply Voltage
2V~6V
Quiescent Current
8uA
See all specifications