Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NXP, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer NXP; no. of channels 1; no. of drivers 1. Check that your power source supplies 4.5 to 5.5 before connecting it.

Key Highlights

  • Manufacturer: NXP
  • No. of Channels: 1
  • No. of Drivers: 1

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerNXP
No. of Channels1
No. of Drivers1
Operating Temperature (°C)-40 to 150
Supply Voltage4.5 to 5.5
No. of Pins8
No. of Receivers1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TJA1051T/3/1J-NXP-CAN Interface, CAN FD Transceiver, 5 Mbps, 4.5 V, 5.5 V, SOIC, 8 Pins, made by NXP, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: NXP
  • No. of Channels: 1
  • No. of Drivers: 1
  • Operating Temperature (°C): -40 to 150
  • Supply Voltage: 4.5 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 8
  • No. of Receivers: 1
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TJA1051 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. The TJA1051 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1050. It offers improved ElectroMagnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance and also features: • Ideal passive behavior to the CAN bus when the supply voltage is off • TJA1051T/3 and TJA1051TK/3 can be interfaced directly with microcontrollers with supply                   voltages from 3 V to 5 V The TJA1051 implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003). Pending the release of the updated version of ISO11898-2 including CAN FD, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s. These features make the TJA1051 an excellent choice for all types of HS-CAN networks, in nodes that do not require a standby mode with wake-up capability via the bus.

Features:

  1. Fully ISO 11898-2:2003 compliant
  2. Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
  3. Suitable for 12 V and 24 V systems
  4. Low ElectroMagnetic Emission (EME) and high Electromagnetic Immunity (EMI)
  5. VIO input on TJA1051T/3 and TJA1051TK/3 allows for direct interfacing with 3 V to 5 V microcontrollers (available in SO8 and very small HVSON8 packages respectively)
  6. EN input on TJA1051T/E allows the microcontroller to switch the transceiver to a very low-current Off mode.

Product Includes:

1 x TJA1051T/3/1J-NXP-CAN Interface, CAN FD Transceiver, 5 Mbps, 4.5 V, 5.5 V, SOIC, 8 Pins

Quick specs

Manufacturer
NXP
No. of Channels
1
No. of Drivers
1
Operating Temperature (°C)
-40 to 150
Supply Voltage
4.5 to 5.5
No. of Pins
8
See all specifications