Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NXP, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Philips Semiconductors (NXP); no. of pins 16; case/package SOIC. Check that your power source supplies 3 to 5.25 before connecting it.

Key Highlights

  • Manufacturer: Philips Semiconductors (NXP)
  • No. of Pins: 16
  • Case/Package: SOIC

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerPhilips Semiconductors (NXP)
No. of Pins16
Supply Voltage3 to 5.25
Case/PackageSOIC
No. of Channels1
No. of Drivers1
No. of Receivers1
Operating Temperature (°C)-40 to 125
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TJA1052IT/5Y-NXP-CAN Interface, Transceiver, CAN FD Transceiver, 5 Mbps, 3 V, 5.25 V, SOIC, 16 Pins, made by NXP, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Philips Semiconductors (NXP)
  • No. of Pins: 16
  • Supply Voltage: 3 to 5.25 (match this to your power supply; too high a voltage can damage the part)
  • Case/Package: SOIC
  • No. of Channels: 1
  • No. of Drivers: 1
  • No. of Receivers: 1
  • Operating Temperature (°C): -40 to 125

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TJA1052IT/5Y is a high-speed CAN Transceiver IC, provides a galvanically isolated interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The TJA1052IT/5Y is specifically targeted at electric vehicles (EV) and hybrid electric vehicles (HEV), where galvanic isolation barriers are needed between the high- and low-voltage parts.

Features:

  1. Loop delay symmetry timing enables communication at data rates up to 2Mbps in CAN FD fast phase
  2. Flawless Cooperation Between Isolator and Transceiver
  3. Fewer Components Improves Reliability in Applications
  4. Guaranteed Performance (Example: Maximum Loop Delay 220ns)
  5. Electrical Transient Immunity of 45kV/μs (Typical)
  6. AEC-Q100 Qualified
  7. Suitable for use in 12 and 24V Systems, Compatible with 3 to 5V Microcontrollers
  8. Bus Common Mode Voltage (Vcm) = ±25V
  9. Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)
  10. Dark Green Product (Halogen-free)
  11. Functional Behaviour Predictable Under All Supply Conditions
  12. Transceiver Disengages from Bus when Not Powered up (Zero Load)
  13. Up to 5kV (RMS) Rated Isolation
  14. Three Versions Available (1kV, 2.5kV and 5kV)
  15. Voltage Compliant with UL 1577, IEC 61010 and IEC 60950
  16. 5kV (RMS) Rated Isolation Voltage Compliant with UL 1577, IEC 61010 and IEC 60950
  17. Supports ISO6469 Electrically Propelled Road Vehicles, Safety Specifications
  18. High ESD Handling Capability on Bus Pins
  19. Bus Pins Protected Against Transients in Automotive Environments
  20. Transmit Data (TXD) Dominant Time-out Function
  21. Under-voltage Detection on Supply Pins

Package Includes:

1 x TJA1052IT/5Y-NXP-CAN Interface, Transceiver, CAN FD Transceiver, 5 Mbps, 3 V, 5.25 V, SOIC, 16 Pins

Quick specs

Manufacturer
Philips Semiconductors (NXP)
No. of Pins
16
Supply Voltage
3 to 5.25
Case/Package
SOIC
No. of Channels
1
No. of Drivers
1
See all specifications