Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by NXP, this drivers and interfaces ic is a good fit for everyday home and hobby use. Main specs: manufacturer Philips Semiconductors (NXP); no. of pins 8; supply voltage 4.5V to 5.5V. Check that your power source supplies 4.5V to 5.5V before connecting it.

Key Highlights

  • Manufacturer: Philips Semiconductors (NXP)
  • No. of Pins: 8
  • Supply Voltage: 4.5V to 5.5V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerPhilips Semiconductors (NXP)
No. of Pins8
Supply Voltage4.5V to 5.5V
Operating Temperature (°C)-40 to 150
Case/PackageSOIC
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The TJA1462AT/0Z-NXP-CAN Bus, 4.5 V to 5.5 V, SOIC-8, AEC-Q100, Transceiver Half, Standby Mode, made by NXP, is listed in our drivers and interfaces ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Philips Semiconductors (NXP)
  • No. of Pins: 8
  • Supply Voltage: 4.5V to 5.5V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40 to 150
  • Case/Package: SOIC
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TJA1462AT/0Z is a CAN FD signal improvement transceiver with standby mode. It provides an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJA146x transceiver implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5, and is fully interoperable with high-speed Classical CAN and CAN FD transceivers. It includes CAN Signal Improvement Capability (SIC), as defined in CiA 601-4:2019. CAN signal improvement significantly reduces signal ringing in a network, allowing reliable CAN FD communication to function in larger topologies. In addition, the TJA1462 features a much tighter bit timing symmetry performance to enable CAN FD communication up to 8Mbit/s. It offers pin compatibility and is designed to avoid changes to hardware and software design, allowing the TJA1462 to be easily retrofitted to existing applications.

Specifications:

No. of Receivers: 1Receivers IC Case / Package: SOIC Supply Voltage Min: 4.5V Operating Temperature Min: -40°C No. of Pins: 8Pins No. of Drivers: 1Drivers CAN Interface IC Type: CAN FD Transceiver Product Range: Multicomp Pro RJ45 Adapter Qualification: AEC-Q100 Supply Voltage Max: 5.5V Data Rate Max: 8Mbps No. of Channels: 1Channels Operating Temperature Max: 150°C

Package Includes:

1 x TJA1462AT/0Z-NXP-CAN Bus, 4.5 V to 5.5 V, SOIC-8, AEC-Q100, Transceiver Half, Standby Mode

Quick specs

Manufacturer
Philips Semiconductors (NXP)
No. of Pins
8
Supply Voltage
4.5V to 5.5V
Operating Temperature (°C)
-40 to 150
Case/Package
SOIC
Shipping Weight
0.001 kg
See all specifications