
1 / 4 · Click to enlarge
AI Summary
A 100-line laser-cut steel code disc with a 22 mm outer diameter and 3.5 mm bore, designed to work with a slotted optical sensor for non-contact speed and position feedback. Its two TTL-level signal lines let you read both speed and rotation direction from a 5 VDC supply.
Key Highlights
- 100-line code disc for fine-grained rotational resolution
- Laser-cut steel construction for clean, accurate slots
- 22 mm outer diameter with 3.5 mm inner bore
- Slim 0.3 mm profile fits tight encoder assemblies
- Runs from a 5 VDC supply
- Two TTL-level signal lines distinguish forward and reverse
Ideal For
- Makers building DC motor speed and position feedback
- Repair technicians servicing printers and plotters
- Automation engineers prototyping servo mechanisms
- Students learning optical encoder fundamentals
- CNC and robotics hobbyists needing a compact code disc
Buying Tip
Measure your shaft diameter and confirm it matches the 3.5 mm bore, and check that the 22 mm disc will clear your sensor gap before ordering.
Elecvora expert review
Our verdict
A well-made passive code disc with a useful 100-line count and a slim steel body that suits compact encoder builds. It does the mechanical job cleanly, provided your shaft and sensor gap match its dimensions.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 100 lines give good resolution for the size
- Laser-cut steel keeps slot edges clean
- Slim 0.3 mm thickness fits tight spaces
- Compact 22 mm diameter suits small mechanisms
Cons
- Sensor module and wiring are not confirmed as included
- Only fits shafts matching the 3.5 mm bore
- No mounting hardware is listed
Best for
Builders adding optical speed or position feedback to small motors and mechanisms
Not ideal for
Anyone expecting a complete plug-and-play encoder module with sensor and cabling
Specifications
| Model No. / Name | Speed Sensor Encoder |
|---|---|
| Operating Voltage (VDC) | 5 |
| Material | Steel |
| No. of Lines | 100 lines |
| Production process | Laser Cutting |
| Outer Diameter (mm) | 22 |
| Inner Diameter (mm) | 3.5 |
| Thickness (mm) | 0.3 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 4 × 3 × 3 cm |
Frequently Asked Questions
What is this encoder wheel used for?
Does it work without a sensor module?
What voltage does it need?
How do I tell forward from reverse rotation?
Will it fit my motor shaft?
What is included with the encoder wheel?
Overview
This optical photoelectric speed sensor encoder wheel is a 100-line code disc made from laser-cut steel. It is the rotating element in an optical sensing setup: an infrared emitter and photodiode sit either side of the disc, and the slots interrupt the beam as the disc turns. Because the sensing is non-contact, there is no mechanical wear on the readout side, and the disc can spin freely on a small shaft.
With a 22 mm outer diameter, a 3.5 mm inner bore and a 0.3 mm thickness, it is sized for compact motor and mechanism assemblies where space is limited. The disc is intended for 5 VDC operation as part of the wider sensor arrangement.
Key Features
- 100 lines: a high slot count for detailed rotational feedback.
- Laser-cut steel: precise slot edges for consistent optical switching.
- Compact dimensions: 22 mm outer diameter and 3.5 mm bore.
- Slim profile: only 0.3 mm thick, so it fits narrow gaps.
- Two signal lines: TTL-level outputs that let you tell forward from reverse.
- Non-contact sensing: the disc itself carries no electronics or wiring.
Specifications Explained
100 lines refers to the number of slots around the disc. More lines mean finer resolution when the sensor counts transitions, which helps when you need smoother speed readings or tighter position control.
22 mm outer diameter and 3.5 mm inner bore define how the disc mounts. The bore is the hole that fits over your shaft, so check your shaft size before ordering. The 0.3 mm thickness keeps the disc light and lets it sit in a narrow slot between emitter and detector.
5 VDC operating voltage is the supply level for the sensor arrangement the disc works with. Two TTL-level signal lines are used together: comparing the two levels is how forward and reverse rotation are distinguished.
Compatibility and Requirements
This disc is a passive steel component and requires a matching slotted optical sensor with an infrared emitter and photodiode to read it. It needs a 5 VDC supply in that sensing circuit. The 3.5 mm bore must match your shaft diameter, and the 22 mm disc diameter must clear the surrounding assembly. No sensor module, wiring or mounting hardware is confirmed as included, so plan for those separately.
Typical Uses
- DC motor position and velocity control
- Position and velocity servomechanisms
- Factory automation robots
- Numerically controlled machinery
- Computer printers and plotters
What's in the Box
Package contents are not confirmed for this listing. Check the product data before ordering if you need to know exactly what is supplied.
Quick specs
- Model No. / Name
- Speed Sensor Encoder
- Operating Voltage (VDC)
- 5
- Material
- Steel
- No. of Lines
- 100 lines
- Production process
- Laser Cutting
- Outer Diameter (mm)
- 22
















