Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact active buzzer module that sounds as soon as it receives 1.5 to 15V DC, drawing under 25mA. Its 2.54mm pin pitch makes it easy to add audible alerts to Arduino and other microcontroller projects.

Key Highlights

  • Active buzzer sounds with DC power, no waveform generation needed
  • Accepts a wide 1.5 to 15V DC operating range
  • Generates tones across a 1.5 to 2.5kHz range
  • Low current draw of less than 25mA
  • 2.54mm pin pitch for breadboards and prototyping boards
  • Compact 26 x 15 x 11mm plastic body weighs 3g

Ideal For

  • Arduino and microcontroller hobbyists adding audible alerts
  • Makers building timers, alarms and notification circuits
  • Electronics students learning about active buzzers
  • Repair technicians replacing a buzzer in small equipment
  • Prototypers working on breadboards and PCB layouts

Buying Tip

Confirm your project's supply voltage sits within the 1.5 to 15V DC range and that your board can provide a square wave if you want variable tones.

Elecvora expert review

Our verdict

A tidy, low-current buzzer module that saves wiring effort because it beeps on DC alone. Its wide voltage range and standard pin pitch make it a sensible spare for prototyping benches and small repairs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Sounds with plain DC power, no driver circuit needed
  • Wide 1.5 to 15V DC operating range
  • Low current draw under 25mA
  • Standard 2.54mm pin pitch fits breadboards
  • Small, light housing at 26 x 15 x 11mm and 3g

Cons

  • Tone range is limited to 1.5 to 2.5kHz
  • No volume control or enclosure supplied
  • Requires soldering or jumper wires for permanent installs

Best for

Adding simple audible alerts to microcontroller and small electronics projects

Not ideal for

Applications needing musical output, volume adjustment or weatherproofing

Specifications

Model No. / NameActive Buzzer Module
Tone Generator1.5 ~ 2.5KHz Generator Range
Shipping Weight0.02 kg
Shipping Dimensions6 × 4 × 2 cm

What's in the box

  • 1 x PCB Mounted Active Buzzer Module

Frequently Asked Questions

Does this buzzer need a driver circuit?
No. It is an active buzzer with a built-in tone generator, so it produces sound when DC power is applied. A microcontroller pin can switch it on and off for different alert patterns.
What voltage does it require?
The module operates from 1.5 to 15V DC and draws less than 25mA. Keep your supply within that range to avoid damaging the buzzer.
How do I connect it to an Arduino?
Connect the buzzer ground to the Arduino ground, leave the centre pin unconnected, and connect a digital pin to the signal pin. Switching that pin on and off produces the tone.
What tone range can it produce?
It generates tones between 1.5 and 2.5kHz. You can vary the pitch by switching the supply on and off at different frequencies using delays or PWM.
What is included in the package?
The package contains one PCB Mounted Active Buzzer Module. No cables or connectors are listed as included.
How should I care for the module?
Keep it dry and avoid exceeding the 15V DC maximum. Handle the pins gently when fitting or removing it from a board.

Overview

This PCB mounted active buzzer module gives your project a simple audible alert. Unlike a passive buzzer, it contains its own tone generator, so applying DC power produces sound without any external drive circuit. That makes it a practical choice when you need a reliable beep for status, warning or notification purposes.

The module is built around a plastic buzzer body measuring 26 x 15 x 11mm and weighing 3g, so it takes up very little space on a board or inside an enclosure.

Key Features

  • Active buzzer design with a built-in tone generator
  • Operating voltage range of 1.5 to 15V DC
  • Working current below 25mA
  • Tone generation range of 1.5 to 2.5kHz
  • 2.54mm pin pitch for standard prototyping
  • Compact black plastic housing

Specifications Explained

Voltage and current

The 1.5 to 15V DC range covers the low-voltage rails common in small electronics, from battery-powered toys to bench supplies. Because current draw stays under 25mA, the buzzer adds little load to your supply and is unlikely to disturb other parts of the circuit.

Tone range

The buzzer covers a 1.5 to 2.5kHz tone generation range. Applying DC gives you a steady alert, while switching the supply on and off at different rates, using delays or PWM from a microcontroller, shifts the pitch within that range. This lets you create distinct sounds for different events in one project.

Pin pitch and size

The 2.54mm pin pitch matches common breadboards and prototyping boards, so the module drops into a build without adapters. At 26 x 15 x 11mm, it fits into small cases and panel cutouts.

Compatibility and Requirements

The module works with microcontrollers such as the Arduino, which can supply a square wave to trigger the buzzer. For a basic connection, the buzzer ground goes to the board ground, the centre pin is left unconnected, and a digital pin drives the signal. Check that your supply voltage falls within the 1.5 to 15V DC range before connecting.

Typical Uses

Common applications include computer systems, printers, copiers, alarms, timers, phones, digital toys, car digital apparatus and general electronics projects that need an alert sound. It is equally useful for breadboard experiments, enclosure-mounted warning beeps and simple notification circuits.

What's in the Box

One PCB Mounted Active Buzzer Module is included.

Passive Buzzer Module

Quick specs

Model No. / Name
Active Buzzer Module
Tone Generator
1.5 ~ 2.5KHz Generator Range
Shipping Weight
0.02 kg
Shipping Dimensions
6 × 4 × 2 cm
See all specifications