Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This piezo buzzer module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Passive Buzzer Module; operating voltage (vdc) 1.5 to 15; max. operating current (a) 25. Check that your power source supplies 1.5 to 15 before connecting it.

Key Highlights

  • Model No. / Name: Passive Buzzer Module
  • Operating Voltage (VDC): 1.5 to 15
  • Max. Operating Current (A): 25

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NamePassive Buzzer Module
Operating Voltage (VDC)1.5 to 15
Max. Operating Current (A)25
Tone Generator1.5 ~ 2.5 Generation Range (kHz)
Length (mm)15
Width (mm)19.7
Weight (g)1 (approx)
Shipping Weight0.01 kg
Shipping Dimensions6 × 4 × 2 cm

Overview

The PCB Mounted Passive Buzzer Module is listed in our piezo buzzer module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Passive Buzzer Module
  • Operating Voltage (VDC): 1.5 to 15 (match this to your power supply; too high a voltage can damage the part)
  • Max. Operating Current (A): 25 (your supply must deliver at least this much current)
  • Tone Generator: 1.5 ~ 2.5 Generation Range (kHz) (quoted range is usually line-of-sight; walls and interference shorten it)
  • Length (mm): 15 (measure your mounting space before ordering)
  • Width (mm): 19.7 (measure your mounting space before ordering)
  • Weight (g): 1 (approx) (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Passive Buzzer Module is a built-in construction of digital transducers, DC energy provides, extensively utilized in computer systems, printers, copiers, alarms, digital toys, car digital apparatus, phones, timers and different digital electronics projects for Alert sound.

 This PCB Mounted Passive Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.

This module is ideally suited to adding noise to your project and is compatible with a pin pitch of 2.54mm while functioning with microcontrollers such as the Arduino. This module lets you respond to programmatic changes with a lovely annoying buzzer that can be altered over a range of frequencies to ensure maximum irritation.
To operate the I/O pin must receive a square wave to trigger the buzzer. This can be produced within all popular microcontrollers.

The following Arduino Sample sketch will generate two different tones by turning on and off the buzzer at different frequencies using a delay.

int buzzer = 8; // set the buzzer control digital IO pin 
void setup() { 
pinMode(buzzer, OUTPUT); // set pin 8 as output
 }
void loop() { 
for (int i = 0; i < 80; i++) { 
     digitalWrite(buzzer, HIGH); // make a sound
     delay(1); // send high signal to buzzer
     digitalWrite(buzzer, LOW); // delay 1ms
     delay(1); // send low signal to buzzer 
                             }
 delay(50);
 for (int j = 0; j < 100; j++) { 
     digitalWrite(buzzer, HIGH);  //make another sound 
     delay(2);
     digitalWrite(buzzer, LOW); // delay 2ms 
     delay(2);
                               }
 delay(100); 
}

Connection Diagram:

Passive Buzzer Module

Connections:
  • Arduino: Buzzer
  • GND: (minus sign)
  • Center pin: No connection
  • Any digital pin: S

Specifications and Features:

  1. Operating Voltage : 1.5 ~ 15V DC
  2. Working Current: Less than 25mA
  3. Material: Plastic
  4. Tone Generation Range : 1.5 ~ 2.5kHz
  5. Dimensions (LxWxH):  26 x 15 x 11 mm
  6. Colour: Black
  7. Weight: 3g

Package Includes:

1 x PCB Mounted Passive Buzzer Module

Quick specs

Model No. / Name
Passive Buzzer Module
Operating Voltage (VDC)
1.5 to 15
Max. Operating Current (A)
25
Tone Generator
1.5 ~ 2.5 Generation Range (kHz)
Length (mm)
15
Width (mm)
19.7
See all specifications