
1 / 3 · Click to enlarge
AI Summary
A compact SSOP28 USB-to-serial bridge IC that adds a full-duplex UART COM port to USB hosts. It runs from 4.5–6 V, supports programmable baud rates, and suits embedded and bus-powered designs.
Key Highlights
- USB-to-serial bridge in a 10 × 5.4 mm SSOP28 SMD package
- Full-duplex TXD/RXD with six MODEM control pins
- Programmable baud rate from 75 bps up to 6 Mbps
- Configurable 512-byte bi-directional data buffer
- Operates from 4.5 V to 6 V with low power consumption
- Direct interface to 3.3 V–1.8 V serial-side devices
Ideal For
- Embedded hardware engineers designing USB-serial interfaces
- Makers building custom USB-to-UART adapter cables
- Technicians repairing or upgrading diagnostic ports
- Product designers needing a compact bus-powered bridge IC
Buying Tip
Confirm that your PCB layout and assembly process support SSOP28 surface-mount soldering, and verify the exact current rating against the official datasheet before finalising your power design.
Elecvora expert review
Our verdict
The PL2303HX SSOP28 is a proven, compact USB-to-serial bridge that simplifies adding COM-port connectivity to embedded designs. Its integrated oscillator and regulator reduce external parts, though the SSOP28 package demands careful surface-mount assembly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated USB transceiver, regulator, and oscillator
- Wide programmable baud range up to 6 Mbps
- Configurable buffer and automatic flow control
- Low power suitable for bus-powered devices
Cons
- Requires surface-mount soldering skills
- Needs external RS232 transceivers for true RS232 levels
- Driver installation required on host systems
Best for
Embedded engineers and makers building compact USB-serial adapters
Not ideal for
Beginners without SMD soldering experience or those needing a ready-made module
Specifications
| Manufacturer | Generic |
|---|---|
| Operating Voltage (VDC) | 4.5 ~ 6 |
| Max. Operating Current (A) | 25 |
| Max. Clock Frequency (MHz) | 12.024 |
| Interface Type | UART |
| Mounting Type | SMD/SMT |
| Length (mm) | 10 |
| Width (mm) | 5.4 |
| Weight (g) | 1 (approx) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
What is the PL2303HX used for?
What supply voltage does it require?
Does it work with 3.3 V logic devices?
What is included in the package?
Can I use it for true RS232 communication?
How should I handle and store the IC?
Overview
The PL2303HX SSOP28 is a USB-to-serial bridge controller IC designed to connect an RS232-like full-duplex asynchronous serial device to a USB-capable host. It provides a compact, surface-mount solution for adding legacy COM-port style communication to modern USB systems. The device integrates an on-chip USB transceiver, a 5 V–3.3 V regulator, and a 12 MHz crystal oscillator, reducing external component count. Its small 10 mm × 5.4 mm SSOP28 footprint makes it suitable for embedded boards, cable adapters, and handheld equipment where space is limited.
Key Features
- USB 2.0 full-speed compliant with on-chip transceiver and regulator
- Full-duplex TXD and RXD plus six MODEM control signals (RTS, CTS, DTR, DSR, DCD, RI)
- Flexible serial format: 5–8 data bits, odd/even/mark/space/none parity, and 1, 1.5, or 2 stop bits
- Programmable baud-rate generator from 75 bps to 6 Mbps
- Configurable 512-byte buffer (256/256 or 128/384 split)
- Extensive flow control with automatic CTS/RTS and XON/XOFF
- Remote wake-up from MODEM input signals
- Two general-purpose I/O pins for custom signalling
Specifications Explained
Operating voltage (4.5–6 VDC): The IC can be powered from a standard 5 V USB rail with tolerance for supply variation. Max operating current (25 A per the listed specification): This figure should be verified against the datasheet for your exact circuit; in practice the bridge is designed for low-power bus-powered operation. Max clock frequency (12.024 MHz): The internal oscillator runs at this rate, supporting the full-speed USB interface and baud-rate generation. Interface type (UART): The serial side presents a UART-style interface, so existing COM-port applications can migrate to USB with appropriate drivers. Mounting (SMD/SMT): The SSOP28 package requires surface-mount assembly, making it suitable for reflow-soldered PCB designs rather than breadboards.
Compatibility and Requirements
The PL2303HX is designed for USB hosts and provides an RS232-like serial interface. Its flexible signal-level requirement on the serial side allows direct connection to devices operating in the 3.3 V–1.8 V range. Note that real RS232 signalling levels are not generated by the IC itself; external transceivers are needed if true RS232 voltages are required. Driver support is required on the host operating system to present the bridge as a virtual COM port. The IC is not a standalone module: it requires a PCB, supporting passives, and a USB connector to form a complete adapter.
Typical Uses
- USB-to-serial adapter cables and dongles
- Embedded development boards and programmer interfaces
- Diagnostic and console ports on networking equipment
- Handheld devices needing a compact COM-port bridge
- Bus-powered accessories with low current budgets
What's in the Box
Package contents are not specified for this listing. Please confirm the exact quantity and any included accessories with the seller before ordering.
Quick specs
- Manufacturer
- Generic
- Operating Voltage (VDC)
- 4.5 ~ 6
- Max. Operating Current (A)
- 25
- Max. Clock Frequency (MHz)
- 12.024
- Interface Type
- UART
- Mounting Type
- SMD/SMT













