
1 / 3 · Click to enlarge
AI Summary
A protected 3S1P lithium-ion pack delivering 11.1V nominal and 2200mAh from A Grade NMC 18650 cells. It includes a JST-XH balance lead and Amass Nylon T discharge connector for straightforward integration into RC and drone builds.
Key Highlights
- 3S1P NMC 18650 pack with 11.1V nominal and 12.6V maximum charge voltage
- 2200mAh capacity with a 10C continuous discharge rating
- Integrated BMS for protection against common cell faults
- Amass Nylon T discharge port plus JST-XH balance connector
- Compact 70 x 25mm body weighing approximately 150g
- Accepts charging current up to 5C for quicker turnaround
Ideal For
- RC hobbyists needing a compact 3S lithium-ion pack
- Drone builders working with 11.1V electronics
- Students and makers prototyping portable devices
- Product developers ordering small-batch protected packs
- Users upgrading from loose 18650 cells to a finished pack
Buying Tip
Check that your charger supports 3S lithium-ion with a 12.6V setting and a JST-XH balance port before ordering, and confirm your device uses an Amass Nylon T connection.
Elecvora expert review
Our verdict
A tidy, protected 3S lithium-ion pack that pairs a compact 70mm body with a 10C rating and both balance and discharge connectors. It is a sensible off-the-shelf option for builders who want 11.1V without assembling cells.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated BMS protection built into the pack
- 10C continuous discharge suits higher-draw electronics
- JST-XH balance lead included for cell monitoring
- Compact 70 x 25mm size and roughly 150g weight
- Amass Nylon T discharge connector already fitted
Cons
- Requires a compatible 3S lithium-ion charger, not included
- Amass Nylon T connection may need an adapter for some devices
- Capacity of 2200mAh limits runtime in power-hungry builds
Best for
Compact RC, drone and portable projects needing a protected 11.1V lithium-ion supply
Not ideal for
High-capacity long-endurance builds or devices wired for a different connector type
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 2200 mAh |
| Continuous Discharge Current (A) | 10C |
| BMS (Y/N) | Y |
| Discharge Port | Amass Nylon T |
| Max. Charging Voltage (V) | 12.6 |
| Max. Discharging Voltage (V) | 8.7 |
| Charging Current | 5C |
| Length (mm) | 70 |
| Width (mm) | 25 |
| Weight (g) | ~150 |
| Model Series | 3 |
| Shipping Weight | 0.184 kg |
| Shipping Dimensions | 13 × 13 × 4 cm |
What's in the box
- 1 x Pro-Range A Grade NMC H18650CAP 11.1V 2200mAh 10C 3S1P Li-Ion Battery Pack with JST-XH and Amass Nylon T
Frequently Asked Questions
What voltage does this battery pack deliver?
What connector does the pack use?
Does it have built-in protection?
What charger do I need?
How much current can it deliver?
What is included with the purchase?
Overview
The Pro-Range A Grade NMC H18650CAP is a three-cell lithium-ion battery pack built in a 3S1P configuration. Three 18650-format NMC cells sit in series to produce an 11.1V nominal output, with 2200mAh of capacity and a 10C continuous discharge rating. The pack measures about 70mm long and 25mm wide and weighs roughly 150g, so it fits builds where a conventional rectangular pack would be too bulky.
A built-in BMS is part of the assembly, and the pack is supplied with a JST-XH balance lead for cell-level monitoring plus an Amass Nylon T discharge connector for the main power path. It is a practical choice for hobbyists, students and prototypers who want a protected lithium-ion pack without assembling cells themselves.
Key Features
- 3S1P NMC construction: three series cells give 11.1V nominal and 12.6V at full charge.
- 2200mAh capacity: a sensible balance of runtime and pack size for compact electronics.
- 10C continuous discharge: supports higher current draw than standard low-rate cells.
- Integrated BMS: on-board protection circuitry is included in the pack.
- Dual connections: JST-XH balance lead and Amass Nylon T discharge port.
- Compact footprint: 70 x 25mm body at approximately 150g.
Specifications Explained
Voltage
Nominal voltage is 11.1V, the maximum charging voltage is 12.6V and the maximum discharging voltage is 8.7V. Your charger and your device's low-voltage cutoff should be set with these limits in mind so the pack is not pushed beyond its intended window.
Capacity and discharge rate
At 2200mAh, the pack stores a moderate amount of energy for its size. The 10C continuous discharge rating describes how quickly that energy can be drawn, which matters for applications with short bursts of higher current.
Charging current
The pack is rated for charging current up to 5C. In practice, choose a charge rate that suits your charger and your own risk tolerance rather than automatically using the maximum figure.
BMS and connectors
The BMS provides protection circuitry inside the pack. The JST-XH lead allows a compatible balance charger to read individual cell voltages, while the Amass Nylon T connector handles the main discharge connection.
Compatibility and Requirements
This is a 3-cell lithium-ion pack, so it needs a charger designed for 3S lithium-ion chemistry with a 12.6V full-charge setting and a JST-XH balance connection. The device it powers should accept an 11.1V nominal supply and be wired for an Amass Nylon T plug, or you will need to adapt the connection. Confirm that your application's current draw stays within the pack's 10C continuous rating.
Typical Uses
The pack suits RC models, drone electronics and portable projects that need a compact 3-cell lithium-ion supply. It is also useful for prototyping and small-batch product development where a ready-made protected pack saves assembly time.
What's in the Box
One Pro-Range A Grade NMC H18650CAP 11.1V 2200mAh 10C 3S1P Li-Ion Battery Pack with JST-XH and Amass Nylon T connector.







Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 2200 mAh
- Continuous Discharge Current (A)
- 10C
- BMS (Y/N)
- Y
- Discharge Port
- Amass Nylon T
- Max. Charging Voltage (V)
- 12.6



















