
1 / 3 · Click to enlarge
AI Summary
A compact 11.1V 7500mAh 3S3P Li-ion pack built from A Grade NMC N18650CH cells with an integrated BMS. The XT60 discharge port and JST XH charging connector make it easy to drop into RC and 12V projects.
Key Highlights
- 11.1V nominal, 12.6V maximum charging voltage for 3S systems
- 7500mAh capacity from a 3S3P N18650CH cell arrangement
- 3C continuous discharge with 1C charging current
- Integrated BMS for pack-level protection
- Amass XT60 discharge port and 4-pin JST XH charge connector
- Compact 70 x 60 mm body weighing approximately 490 g
Ideal For
- RC hobbyists needing a protected 3S pack with XT60 output
- FPV pilots powering ground stations and field gear
- Makers building portable 12V devices and test rigs
- Students and hobbyists working on battery-powered projects
- Builders who prefer pre-assembled packs over loose cells
Buying Tip
Check that your charger supports a 12.6V maximum charge voltage and matches either the DC jack female or 4-pin JST XH charge connector before ordering.
Elecvora expert review
Our verdict
A tidy, protected 3S3P pack that trades extreme burst output for steady capacity and simple connectors. It suits builders who want a ready-made 11.1V lithium pack without assembling cells themselves.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Built-in BMS saves wiring a separate protection board
- XT60 discharge and JST XH charging connectors already fitted
- Compact 70 x 60 mm footprint at around 490 g
- 7500mAh nominal capacity from a 3S3P layout
Cons
- 3C continuous rating limits high-burst applications
- Charger lead must match the DC jack or 4-pin JST XH connector
- No charger or mating XT60 plug included
Best for
RC, FPV ground gear and portable 12V projects needing a protected 3S pack
Not ideal for
High-burst applications that demand very high continuous current
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 7500 mAh |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | Y |
| Charge Connector | DC JACK FEMALE/4 Pin JST XH |
| Discharge Port | Amass XT60 |
| Max. Charging Voltage (V) | 12.6 |
| Max. Discharging Voltage (V) | 8.7 |
| Charging Current | 1C |
| Length (mm) | 70 |
| Width (mm) | 60 |
| Weight (g) | 490 |
| Model Series | 3 |
| Shipping Weight | 0.5 kg |
| Shipping Dimensions | 12 × 10 × 5 cm |
What's in the box
- 1 x Pro-Range A Grade NMC N18650CH 11.1V 7500mAh 3C 3S3P Li-Ion Battery Pack
Frequently Asked Questions
What voltage does this pack output?
How much current can it deliver?
What connectors does it use?
Does it include a battery management system?
What is included in the package?
How should I store the pack?
Overview
The Pro-Range A Grade NMC N18650CH is a ready-built 3S3P lithium-ion battery pack. Nine N18650CH cells are arranged in three series groups of three parallel cells, giving an 11.1V nominal output and 7500mAh nominal capacity. A built-in BMS sits between the cells and the connectors, so the pack can be charged and discharged as a single unit rather than as loose cells.
Measuring 70 mm long and 60 mm wide and weighing around 490 g, the pack fits into spaces where a larger brick-style battery would be awkward. It is aimed at builders and hobbyists who want a protected 12V-class lithium pack with standard connectors already fitted.
Key Features
- 3S3P NMC construction: three series groups of three N18650CH cells for 11.1V nominal and 7500mAh capacity.
- Integrated BMS: pack-level management is built in, so no external protection board is required.
- 3C continuous discharge: suited to steady, moderate-current loads rather than high-burst applications.
- 1C charging: charge at up to 1C against a 12.6V maximum charging voltage.
- Practical connectors: Amass XT60 for discharge, DC jack female and 4-pin JST XH for charging.
- Compact footprint: 70 x 60 mm body at roughly 490 g.
Specifications Explained
Voltage
Nominal voltage is 11.1V, which is the typical 3S figure. The pack should not be charged above 12.6V, and discharge should stop at 8.7V. Respecting both limits is what keeps the cells and BMS within their intended operating range.
Capacity and current
The 7500mAh nominal capacity comes from paralleling three cells per series group. Continuous discharge is rated at 3C, and charging at 1C. In practical terms, this is a pack for equipment that draws a steady current rather than short, very high bursts.
Connectors
Discharge runs through an Amass XT60, a common connector for RC and hobby power leads. Charging uses a DC jack female or 4-pin JST XH connection, so your charger lead needs to match one of these.
Compatibility and Requirements
Use a charger designed for 3S lithium-ion packs with a 12.6V maximum charge voltage and a compatible DC jack or 4-pin JST XH charge lead. The discharge side requires an XT60 mating connector on your device or wiring harness. Do not exceed the 3C continuous discharge rating or the 1C charge rate.
Typical Uses
The pack suits RC models and FPV ground equipment that accept a 3S lithium supply, portable 12V devices, test rigs and bench projects. It is also a reasonable option where a protected pack with pre-fitted connectors saves build time compared with assembling cells yourself.
What's in the Box
1 x Pro-Range A Grade NMC N18650CH 11.1V 7500mAh 3C 3S3P Li-Ion Battery Pack.

Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 7500 mAh
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- Y
- Charge Connector
- DC JACK FEMALE/4 Pin JST XH
- Discharge Port
- Amass XT60



















