
1 / 3 · Click to enlarge
AI Summary
A 14.8V 2500mAh 4S1P Li-Ion pack with integrated BMS, 3C continuous discharge and Amass Nylon T output. Its 85mm by 25mm form factor and 5-pin JST XH charge port make it easy to integrate into compact RC and portable builds.
Key Highlights
- 14.8V nominal from four N18650CH cells in 4S1P
- 2500mAh capacity with 3C continuous discharge
- Built-in BMS for overcharge and short-circuit protection
- 5-pin JST XH charge connector and Amass Nylon T discharge port
- Compact 85mm length and 25mm width, about 240g
- Charges at 1C to a maximum of 16.8V
Ideal For
- RC hobbyists building 4S-compatible models
- Drone builders needing a compact 14.8V pack
- Electronics prototypers designing custom enclosures
- Makers replacing a worn 4S Li-Ion pack
- Portable device builders requiring a protected supply
Buying Tip
Confirm your charger supports a 16.8V maximum charge voltage and a 5-pin JST XH connection before ordering, and check that your load stays within the 3C continuous discharge limit.
Elecvora expert review
Our verdict
A well-specified 4S1P Li-Ion pack with an integrated BMS and practical connector choices. It suits compact RC and portable builds where a 14.8V nominal supply is required and space is limited.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated BMS adds protection
- 3C continuous discharge suits many RC loads
- Compact 85mm by 25mm size
- Convenient JST XH charge and Amass Nylon T discharge connectors
- Lightweight at around 240g
Cons
- Capacity is moderate at 2500mAh
- Requires a compatible 4S Li-Ion charger
- Discharge current is limited by the 3C rating
Best for
Compact 4S RC models, drones and portable electronics
Not ideal for
High-current applications exceeding the 3C continuous rating
Specifications
| Nominal Voltage (V) | 14.8 |
|---|---|
| Nominal Capacity (mAh) | 2500 mAh |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | Y |
| Charge Connector | 5 Pin JST XH |
| Discharge Port | Amass Nylon T |
| Max. Charging Voltage (V) | 16.8 |
| Max. Discharging Voltage (V) | 11.6 |
| Charging Current | 1C |
| Length (mm) | 85 |
| Width (mm) | 25 |
| Weight (g) | ~240 |
| Model Series | 4 |
| Shipping Weight | 0.24 kg |
| Shipping Dimensions | 9 × 9 × 5 cm |
What's in the box
- 1 x Pro-Range A Grade NMC N18650CH 14.8V 2500mAh 3C 4S1P Li-Ion Battery Pack
Frequently Asked Questions
What is the nominal voltage and capacity of this pack?
What connectors does the battery use?
Does this battery have built-in protection?
What charger should I use?
What is the maximum discharge rate?
What is included in the package?
Overview
The Pro-Range A Grade NMC N18650CH is a 4S1P lithium-ion battery pack that delivers 14.8V nominal from four N18650CH cells. With a 2500mAh capacity and a 3C continuous discharge rating, it suits builds that need a steady mid-voltage supply without the bulk of larger packs. An integrated BMS manages cell protection, while the 5-pin JST XH charge connector and Amass Nylon T discharge port let you wire it into existing charge and load circuits. At roughly 85mm long, 25mm wide and 240g, it fits into compact enclosures and airframes.
Key Features
- 4S1P NMC configuration: four series cells give 14.8V nominal with 2500mAh capacity.
- 3C continuous discharge: supports sustained current draw for RC and portable applications.
- Integrated BMS: helps protect the pack during charge and discharge.
- Charge and discharge connectors: 5-pin JST XH for charging, Amass Nylon T for the load.
- 1C charging: recharge at up to 1C with a maximum charging voltage of 16.8V.
- Compact footprint: 85mm by 25mm and around 240g for space-limited builds.
Specifications Explained
Nominal voltage and capacity: 14.8V and 2500mAh define the pack's energy class. The 4S1P layout means four cells in series, one parallel string, so capacity matches a single cell while voltage is multiplied.
Discharge and charge rates: 3C continuous discharge sets the sustained current ceiling relative to capacity, while 1C charging sets the recommended recharge rate. The maximum charging voltage is 16.8V and the maximum discharging voltage is 11.6V, so your charger and low-voltage cut-off should match these limits.
BMS and connectors: The built-in BMS adds a protection layer. The 5-pin JST XH connector is used for charging, and the Amass Nylon T port handles discharge to your device or model.
Size and weight: At 85mm long, 25mm wide and about 240g, the pack is suited to compact installations where larger 4S packs would not fit.
Compatibility and Requirements
Use a charger compatible with 4S lithium-ion packs that supports a 16.8V maximum charge voltage and the 5-pin JST XH connection. Your load should connect via the Amass Nylon T discharge port and should not draw more than the 3C continuous rating allows. Ensure your device's low-voltage cut-off respects the 11.6V maximum discharging voltage to avoid over-discharge.
Typical Uses
This pack is a fit for RC models, drone builds, portable electronics and prototyping projects that need a 14.8V nominal supply in a small package. Its connector set and protected design also make it useful for custom enclosures and handheld devices where a stable voltage output matters.
What's in the Box
1 x Pro-Range A Grade NMC N18650CH 14.8V 2500mAh 3C 4S1P Li-Ion Battery Pack.







Quick specs
- Nominal Voltage (V)
- 14.8
- Nominal Capacity (mAh)
- 2500 mAh
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- Y
- Charge Connector
- 5 Pin JST XH
- Discharge Port
- Amass Nylon T



















