Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 4S1P lithium-ion pack delivering 14.8V nominal and 2600mAh from A Grade NMC 18650 cells. Its 3C rating supports up to 7.8A discharge, making it a practical power source for drones, robotics and portable electronics.

Key Highlights

  • Four A Grade NMC N18650CH cells in a 4S1P configuration
  • 14.8V nominal output with 2600mAh capacity
  • 3C discharge rating for up to 7.8A continuous draw
  • Amass Nylon T discharge and DC jack female charge connectors
  • 5-pin JST XH balance lead for cell-level monitoring
  • Compact 223 g build measuring 68.56 x 41.79 x 38.45 mm

Ideal For

  • Drone builders needing a compact 14.8V pack
  • Robotics hobbyists powering medium-load platforms
  • Makers building embedded systems and automation setups
  • Technicians servicing portable 14.8V electronics
  • DIY enthusiasts who want a pre-wired pack with balance lead

Buying Tip

Check that your device accepts a 14.8V nominal pack, stays under the 7.8A discharge rating, and matches the Amass Nylon T and DC jack connectors before ordering.

Elecvora expert review

Our verdict

A tidy, pre-wired 4S1P pack that makes 14.8V power easy to integrate into compact projects. Its 3C rating and 2600mAh capacity suit medium-load electronics rather than high-current builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Balance lead and both charge and discharge connectors already fitted
  • Compact, lightweight format at about 223 g
  • Clear 7.8A discharge and 3.9A charge ratings
  • A Grade NMC 18650 cells in a simple 4S1P layout

Cons

  • 3C rating limits use in high-current applications
  • Requires a compatible balance charger, which is not included
  • Device side must accept the Amass Nylon T connector or be adapted

Best for

Robotics, drones and portable electronics needing a compact 14.8V supply

Not ideal for

High-drain builds that exceed the 7.8A discharge rating

Specifications

Shipping Weight0.274 kg
Shipping Dimensions11 × 8 × 7 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CH 14.8V 2600mAh 3C 4S1P Quad Li-Ion Battery Pack

Frequently Asked Questions

What voltage does this battery pack deliver?
It has a nominal voltage of 14.8V from a 4S1P configuration and falls in the 14.8V to 16.8V class. Check your device's acceptable input range before connecting it.
How much current can it supply?
The pack has a 3C discharge rating, which corresponds to a 7.8A discharge current. The stated charge current is 3.9A.
Which connectors are fitted?
It comes with an Amass Nylon T discharge connector, a DC jack female charge connector and a 5-pin JST XH balance connector.
Do I need a special charger?
Yes. You need a charger compatible with the 5-pin JST XH balance lead and able to work within the 3.9A charge current limit. A charger is not included.
What is included in the package?
The package contains one Pro-Range A Grade NMC N18650CH 14.8V 2600mAh 3C 4S1P Quad Li-Ion Battery Pack.
How should I store and care for the pack?
Keep it in a cool, dry place, avoid exceeding the rated currents, and inspect it regularly for swelling or damaged connectors and wiring.

Overview

The Pro-Range A Grade NMC N18650CH pack is a four-cell lithium-ion battery built around 18650-format NMC cells. Wired in a 4S1P arrangement, it produces a nominal 14.8V and stores 2600mAh, giving a compact, rechargeable power source for projects that need more voltage than a single cell can provide. The pack is supplied with an Amass Nylon T discharge connector, a DC jack female charge connector and a 5-pin JST XH balance connector, so the wiring needed for charging, discharging and cell monitoring is already in place.

Key Features

  • A Grade NMC cells: four matched N18650CH cells form the 4S1P pack.
  • 14.8V nominal, 2600mAh capacity: a balanced combination of voltage and runtime for medium-load devices.
  • 3C discharge support: rated for a 7.8A discharge current and a 3.9A charge current.
  • Ready-made connectors: Amass Nylon T for discharge, DC jack female for charging, 5-pin JST XH for balancing.
  • Portable format: approximately 223 g and 68.56 x 41.79 x 38.45 mm.

Specifications Explained

Voltage and configuration

The 4S1P label means four cells are connected in series with a single parallel string. Nominal voltage is 14.8V, and the pack sits in the 14.8V to 16.8V class, which is the range buyers should keep in mind when matching it to a device. Because the cells are in series, the balance lead matters: the 5-pin JST XH connector lets a balance charger monitor and equalise each cell group.

Capacity and current

At 2600mAh, the pack offers moderate runtime for its size. The 3C rating translates to a 7.8A discharge current, which is appropriate for medium-load applications. The stated charge current is 3.9A, so a charger should be set within that limit rather than pushed higher.

Size and weight

At 223 g and roughly 69 x 42 x 38 mm, the pack fits small frames and enclosures where a larger brick would not. Shipping weight is listed at 0.274 kg.

Compatibility and Requirements

The pack is intended for devices that accept a 14.8V nominal lithium-ion supply and draw no more than the 7.8A discharge rating. It requires a compatible balance charger for the 5-pin JST XH lead, and the device side must accept an Amass Nylon T discharge connector or be adapted to it. Charging is done through the DC jack female connector. Confirm your equipment's voltage window and connector types before ordering.

Typical Uses

This pack suits robotics platforms, drone builds, embedded systems, automation setups and portable electronics that need a compact 14.8V source. It is also a reasonable choice for DIY projects where a pre-wired pack with balance lead saves assembly time.

What's in the Box

  • 1 x Pro-Range A Grade NMC N18650CH 14.8V 2600mAh 3C 4S1P Quad Li-Ion Battery Pack

Quick specs

Shipping Weight
0.274 kg
Shipping Dimensions
11 × 8 × 7 cm
See all specifications