Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Pro-Range 7.4V 2600mAh 2S1P Li-Ion battery pack using A-grade N18650CH cells with 3C continuous discharge. Compact and lightweight, it features JST XH charge and JST RCY discharge connectors for easy integration.

Key Highlights

  • 2S1P configuration delivers 7.4V nominal from two N18650CH cells
  • 2600mAh capacity for extended runtime in portable devices
  • 3C continuous discharge supports moderate-power applications
  • 3-pin JST XH charge and 2-pin JST RCY discharge connectors
  • Compact 65 x 19mm size and approximately 100g weight
  • A-grade NMC cells for reliable performance

Ideal For

  • RC hobbyists building small-scale models
  • DIY electronics enthusiasts needing a compact 2S Li-ion pack
  • FPV pilots with low-power setups
  • Portable device makers requiring a lightweight power source
  • Students and educators for battery-powered projects

Buying Tip

Confirm that your device and charger are compatible with a 2S Li-ion pack without a BMS and that the JST XH and JST RCY connectors match your setup.

Elecvora expert review

Our verdict

A solid, compact 2S Li-ion pack for moderate-power applications where a BMS is not required. The use of A-grade N18650CH cells and standard connectors makes it a convenient choice for DIY and RC projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight and compact form factor
  • Standard JST connectors for easy integration
  • A-grade cells for reliable performance
  • 3C continuous discharge suitable for many devices

Cons

  • No built-in BMS requires external protection
  • Limited to 3C discharge, not for high-drain setups
  • Connector compatibility must be verified

Best for

RC and DIY projects needing a small, lightweight 2S Li-ion pack

Not ideal for

High-drain applications or setups requiring a built-in BMS

Specifications

Nominal Voltage (V)7.4
Nominal Capacity (mAh)2500 mAh
Continuous Discharge Current (A)3C
BMS (Y/N)N
Charge Connector3 Pin JST XH
Discharge Port2 Pin JST RCY BEC Female
Length (mm)65
Width (mm)19
Weight (g)~100
Model Series2
Shipping Weight0.125 kg
Shipping Dimensions16 × 10 × 3 cm

What's in the box

  • 1 x Pro-Range A Grade NMC N18650CH 7.4V 2600mAh 3C 2S1P Li-Ion Battery Pack in a Line

Frequently Asked Questions

What is the nominal voltage of this battery pack?
The nominal voltage is 7.4V, and it charges to a maximum of 8.4V.
Does this pack have a built-in BMS?
No, this pack does not include a battery management system. You must provide external protection for charging and discharging.
What connectors are on the battery?
It has a 3-pin JST XH connector for charging and a 2-pin JST RCY BEC female connector for discharge.
Can I use this battery in my drone?
It can be used in drones that accept a 2S Li-ion pack and draw current within the 3C continuous limit, provided your setup includes appropriate protection.
How should I charge this battery?
Use a Li-ion charger compatible with 2S packs and the 3-pin JST XH connector. Ensure the charger has the correct voltage settings and never leave charging unattended.
What is included in the package?
The package includes one Pro-Range A Grade NMC N18650CH 7.4V 2600mAh 3C 2S1P Li-Ion Battery Pack.

Overview

The Pro-Range A Grade NMC N18650CH 7.4V 2600mAh 3C 2S1P Li-Ion Battery Pack is a compact power solution built around two high-quality 18650 cells. Arranged in a 2S1P line configuration, it provides a nominal voltage of 7.4V and a capacity of 2600mAh, making it a practical choice for devices that require a stable, rechargeable energy source. The pack is designed for users who need a lightweight and space-efficient battery for RC models, portable electronics, or custom projects. With a continuous discharge rate of 3C, it can deliver up to 7.8A, supporting moderate-power applications. The absence of an integrated BMS means the pack is best suited to setups where external protection is provided or where the device itself manages safety. Finished with a 3-pin JST XH charge connector and a 2-pin JST RCY BEC female discharge port, it is ready to integrate into your wiring harness.

Key Features

  • High energy density: Two N18650CH cells pack 2600mAh into a slim 65 x 19mm form factor.
  • Stable voltage output: Nominal 7.4V with consistent discharge characteristics.
  • Moderate discharge capability: 3C continuous discharge (approximately 7.8A) for suitable loads.
  • Convenient connectors: JST XH 3-pin for charging and JST RCY 2-pin for discharge.
  • Lightweight: Weighs only about 100g, minimizing impact on portable builds.
  • A-grade NMC cells: Quality cells for dependable cycling performance.

Specifications Explained

Nominal Voltage (7.4V): This is the average voltage during discharge, derived from two 3.7V cells in series. It is compatible with devices designed for 2S lithium-ion packs. The pack will charge to 8.4V and should not be discharged below the recommended cutoff for Li-ion cells.

Nominal Capacity (2600mAh): Indicates the total charge the pack can store. At a 1C discharge rate, it can deliver 2600mA for about one hour. Actual runtime depends on the load and conditions.

Continuous Discharge Current (3C): The pack can sustain a discharge current of three times the capacity (about 7.8A) continuously. This makes it suitable for devices that draw moderate current, but it is not intended for high-drain applications.

BMS (No): There is no built-in battery management system. Users must ensure proper charging and discharging protection externally, such as using a compatible charger and a device with low-voltage cutoff.

Connectors: The 3-pin JST XH connector is typically used for balance charging, while the 2-pin JST RCY BEC female connector serves as the discharge output. Verify your device's mating connectors before use.

Dimensions and Weight: At 65mm long, 19mm wide, and approximately 100g, the pack is easy to fit into tight spaces. Always confirm clearance in your application.

Compatibility and Requirements

This battery pack is compatible with devices that accept a 2S lithium-ion pack with a nominal voltage of 7.4V. The discharge connector is a 2-pin JST RCY BEC female, so your device should have the corresponding male connector or an adapter. Charging requires a suitable Li-ion charger with a 3-pin JST XH connection and a charge profile for 2S packs (8.4V full charge). Because the pack lacks a BMS, you must use a charger that correctly terminates charging and ensure your device has its own low-voltage protection. Do not use with devices that require a built-in BMS unless external protection is added.

Typical Uses

This pack is well-suited for RC vehicles, drones, and FPV setups that can accommodate a 2S Li-ion battery and do not demand high discharge rates. It also works in portable electronics, DIY projects, and small gadgets where a compact 7.4V power source is needed. Common applications include powering receivers, small transmitters, LED lighting, and other low-to-moderate current loads.

What's in the Box

1 x Pro-Range A Grade NMC N18650CH 7.4V 2600mAh 3C 2S1P Li-Ion Battery Pack in a Line.

Quick specs

Nominal Voltage (V)
7.4
Nominal Capacity (mAh)
2500 mAh
Continuous Discharge Current (A)
3C
BMS (Y/N)
N
Charge Connector
3 Pin JST XH
Discharge Port
2 Pin JST RCY BEC Female
See all specifications