
1 / 3 · Click to enlarge
AI Summary
A 14.8V 3500mAh 4S1P Li-Ion battery pack using A-grade NMC cells, with Amass T discharge, DC jack charging, and JST XH balance connectors. Compact and lightweight, it suits DIY electronics, robotics, and drone projects needing stable moderate power.
Key Highlights
- A-grade NMC 18650 cells for consistent performance
- 14.8V nominal voltage and 3500mAh capacity
- 3C discharge rate supports up to 10.5A continuous
- Amass Nylon T discharge connector and DC jack charging port
- 5-pin JST XH balance connector for cell monitoring
- Compact 70 x 36 x 34 mm, 232 g design
Ideal For
- DIY electronics enthusiasts building custom power banks
- Robotics hobbyists needing a compact 4S Li-Ion pack
- Drone builders for small to medium UAVs
- Makers creating portable devices or backup systems
Buying Tip
Check that your charger supports 4S Li-Ion packs and has a compatible DC plug and JST XH balance port before purchasing.
Elecvora expert review
Our verdict
The Pro-Range A Grade NMC pack offers a practical 4S Li-Ion solution with quality cells and convenient connectors. It is well-suited for moderate-power DIY and robotics applications where a compact, ready-to-use pack is needed.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Uses A-grade NMC cells for reliable performance
- Includes discharge, charge, and balance connectors
- Lightweight and compact form factor
- Supports up to 10.5A continuous discharge
Cons
- No built-in BMS for protection
- Requires a compatible 4S Li-Ion charger with DC plug and JST XH balance port
Best for
DIY electronics and robotics projects needing a compact 14.8V pack
Not ideal for
High-drain applications exceeding 10.5A continuous
Specifications
| Shipping Weight | 0.283 kg |
|---|---|
| Shipping Dimensions | 11 × 8 × 7 cm |
What's in the box
- 1 x Pro-Range A Grade NMC N18650CR-35E 14.8V 3500mAh 3C 4S1P Quad Li-Ion Battery Pack
Frequently Asked Questions
What is the maximum continuous discharge current of this battery pack?
Can I charge this battery pack with a standard LiPo charger?
Does this battery pack have a built-in battery management system (BMS)?
What is included in the package?
What is the weight and dimensions of the battery pack?
How should I store the battery pack when not in use?
Overview
The Pro-Range A Grade NMC N18650CR-35E is a 4S1P lithium-ion battery pack designed for compact electronic and robotics applications. Built with high-quality NMC 18650 cells, it provides a stable 14.8V nominal output and 3500mAh capacity. The pack supports a 3C discharge rate, enabling safe current delivery up to 10.5A, making it suitable for moderate power requirements. It comes pre-wired with an Amass Nylon T discharge connector, a DC jack female charging port, and a 5-pin JST XH balance connector for easy integration into your projects.
Key Features
- A Grade NMC cells: Ensure stable voltage output and long cycle life.
- 4S1P configuration: Delivers 14.8V nominal voltage with 3500mAh capacity.
- 3C discharge rate: Supports continuous discharge up to 10.5A.
- Easy connection interfaces: Amass Nylon T discharge, DC jack charging, and JST XH balance connectors.
- Lightweight and portable: Weighs only 232 g with dimensions of 70 x 36 x 34 mm.
Specifications Explained
Nominal Voltage (14.8V): This is the average voltage during discharge, suitable for 4S Li-Ion applications. The pack’s voltage range is not specified, but Li-Ion cells typically operate between 3.0V and 4.2V per cell, giving a full charge of 16.8V and a nominal 14.8V.
Capacity (3500mAh): Indicates the total charge the pack can store. At a 1C discharge rate, it can deliver 3.5A for about one hour. Higher discharge rates reduce effective capacity.
Discharge Rate (3C): The pack can be discharged at up to three times its capacity, i.e., 10.5A continuous. This is adequate for many DIY projects, robotics, and small drones.
Charge Current (5.25A): The maximum recommended charge current is 5.25A (1.5C). Charging at lower rates may extend cycle life.
Connectors: The Amass Nylon T connector is a common high-current connector for discharge. The DC jack female port allows charging via a compatible DC plug. The 5-pin JST XH balance connector enables cell balancing and monitoring with a suitable charger or BMS.
Compatibility and Requirements
This battery pack is compatible with devices and projects that accept a 4S Li-Ion pack with a nominal 14.8V. Ensure your device’s voltage range matches the pack’s output. The discharge connector is an Amass Nylon T plug; your device or ESC should have a matching T connector or an adapter. For charging, you need a Li-Ion charger designed for 4S packs with a compatible DC plug and a 5-pin JST XH balance port. Always use a charger with the correct voltage and current settings. The pack does not include a BMS; external protection is recommended if your application requires overcharge, over-discharge, or short-circuit protection.
Typical Uses
This battery pack is ideal for DIY electronics projects, robotics, drones, backup power systems, and portable devices. Its compact size and moderate discharge rate make it suitable for powering motors, sensors, and control boards in small robots. It can also serve as a portable power source for field equipment or as a backup battery for security systems.
What's in the Box
- 1 x Pro-Range A Grade NMC N18650CR-35E 14.8V 3500mAh 3C 4S1P Quad Li-Ion Battery Pack



















