
1 / 3 · Click to enlarge
AI Summary
A 14.8V 10000mAh 4S2P lithium-ion pack built from A Grade NMC 21700 cells with an integrated BMS. It gives compact, high-capacity 4S power with a 3C continuous discharge rating.
Key Highlights
- 14.8V nominal 4S2P configuration with 10000mAh capacity
- A Grade NMC N21700CG-50 cells in a compact 90 x 45 mm pack
- Integrated BMS for overcharge, over-discharge and short-circuit protection
- 3C continuous discharge and 1C charging rates
- Full charge at 16.8V with an 11.6V discharge cut-off
- Approximately 645 g, practical for weight-aware builds
Ideal For
- Drone builders needing a compact 4S li-ion power source
- RC hobbyists running moderate-current 14.8V setups
- Portable electronics and field equipment designers
- Makers building protected battery enclosures
- Users who prefer li-ion low self-discharge over li-po storage habits
Buying Tip
Check that your charger supports a 4S li-ion profile with a 16.8V cut-off and that your load stays within the 3C continuous discharge rating before you buy.
Elecvora expert review
Our verdict
A well-rounded protected 4S li-ion pack that trades extreme burst current for capacity and steady voltage. It suits builders who value a managed, compact energy source over high-discharge li-po behaviour.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 10000mAh capacity in a compact 90 x 45 mm pack
- Integrated BMS adds pack-level protection
- Stable 14.8V nominal output with low self-discharge
- No memory effect, so partial charging is fine
Cons
- 3C continuous rating limits high-current applications
- Connector type is not specified, so buyers must confirm fit
- Requires a 4S li-ion charger set to 16.8V
Best for
Capacity-focused 4S drone, RC and portable electronics builds
Not ideal for
High-burst-current racing or heavy-draw power setups
Specifications
| Nominal Voltage (V) | 14.8 |
|---|---|
| Nominal Capacity (mAh) | 10000 mAh |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | Y |
| Max. Charging Voltage (V) | 16.8 |
| Max. Discharging Voltage (V) | 11.6 |
| Charging Current | 1C |
| Length (mm) | 90 |
| Width (mm) | 45 |
| Weight (g) | ~645 |
| Model Series | 4 |
| Shipping Weight | 0.7 kg |
| Shipping Dimensions | 14 × 12 × 9 cm |
What's in the box
- 1 x Pro-Range A Grade NMC N21700CG-50 14.8V 10000mAh 3C 4S2P Li-ion Battery Pack
Frequently Asked Questions
What voltage does this pack deliver?
How much current can it supply?
Does it include a protection board?
What charger do I need?
What is included in the package?
How should I store it?
Overview
The Pro-Range A Grade NMC N21700CG-50 is a 4S2P lithium-ion battery pack rated at 14.8V nominal and 10000mAh. It is built from NMC 21700 cells arranged in two parallel strings of four series cells, giving a 4S voltage profile in a pack measuring 90 mm long and 45 mm wide at roughly 645 g. An integrated BMS is part of the pack, so the cells are managed as a complete unit rather than left to an external board.
This is a li-ion pack rather than a li-po, which makes it a sensible option for builds that benefit from high energy density and low self-discharge in a fixed enclosure.
Key Features
- High energy density: 10000mAh of capacity in a compact 4S footprint.
- Built-in BMS: pack-level protection against overcharge, over-discharge and short circuits.
- Predictable voltage: operates between 16.8V full charge and 11.6V cut-off.
- Moderate current capability: 3C continuous discharge, 1C charging.
- Low self-discharge: retains charge well during storage between sessions.
- No memory effect: no need to fully discharge before recharging.
Specifications Explained
14.8V nominal is the working voltage of a four-cell series li-ion pack; expect up to 16.8V when fully charged and around 11.6V at the low end. Equipment must be rated for that full range.
10000mAh is the total capacity from the 4S2P arrangement, which is where the long runtime in this size class comes from. 3C continuous means discharge current should stay within three times the capacity rating, so plan your load around that ceiling rather than treating it as a burst spec. 1C charging sets the charge current ceiling, and the charger must stop at 16.8V.
Compatibility and Requirements
The pack needs a lithium-ion charger configured for a 4S pack with a 16.8V maximum charge voltage. Your device should tolerate the 11.6V to 16.8V operating window and draw no more than the 3C continuous rating. Connector type is not specified in the product data, so confirm the termination on your unit matches your build before ordering.
Typical Uses
Suited to drone and RC projects, portable electronics, field equipment and other builds where a protected 4S li-ion pack with generous capacity fits the available space.
What's in the Box
- 1 x Pro-Range A Grade NMC N21700CG-50 14.8V 10000mAh 3C 4S2P Li-ion Battery Pack







Quick specs
- Nominal Voltage (V)
- 14.8
- Nominal Capacity (mAh)
- 10000 mAh
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- Y
- Max. Charging Voltage (V)
- 16.8
- Max. Discharging Voltage (V)
- 11.6



















