
1 / 3 · Click to enlarge
AI Summary
A compact 11.1V 2200mAh 3S1P Li-Ion pack with built-in BMS protection, 2C continuous discharge and a 1C charge rate. It combines a 4-pin JST-XH charge connector with an Amass Nylon-T discharge port for small RC and portable builds.
Key Highlights
- 11.1V nominal three-cell pack with 2200mAh capacity
- 2C continuous discharge with 1C charging up to 12.6V
- Built-in BMS for overcharge, over-discharge and short protection
- 4-pin JST-XH charge connector plus DC jack female input
- Amass Nylon-T discharge port for high-current connections
- Compact 71 x 62 mm body weighing 166 g
Ideal For
- RC hobbyists building small models with 3S lithium power
- FPV pilots powering ground stations and accessories
- DIY electronics makers needing a protected 11.1V pack
- Prototypers fitting compact battery enclosures
- Portable device builders wanting a self-contained lithium source
Buying Tip
Check that your charger supports a 12.6V maximum on 3S Li-Ion and that your device uses an Amass Nylon-T connection before ordering.
Elecvora expert review
Our verdict
A tidy, protected 3S Li-Ion pack that removes the guesswork from small builds, provided your charger and device match its connector set. The 2C discharge rating keeps it in the moderate-load category rather than high-draw applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Built-in BMS protection on a compact 166 g pack
- Defined charge and discharge connectors simplify wiring
- 2C continuous discharge suits small RC and portable loads
- Clear 12.6V charge and 8.7V discharge limits
Cons
- Connector types are fixed and may not match every device
- 2C rating limits use in high-current applications
- Requires a compatible 3S Li-Ion charger, not included
Best for
Small RC models, FPV accessories and portable electronics needing a protected 11.1V pack
Not ideal for
High-draw applications that exceed the 2C continuous discharge rating
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 2200 mAh |
| Continuous Discharge Current (A) | 2C |
| BMS (Y/N) | Y |
| Charge Connector | DC JACK FEMALE/4 Pin JST XH |
| Discharge Port | Amass Nylon T |
| Max. Charging Voltage (V) | 12.6 |
| Max. Discharging Voltage (V) | 8.7 |
| Charging Current | 1C |
| Length (mm) | 71 |
| Width (mm) | 62 |
| Weight (g) | 166 |
| Model Series | 3 |
| Shipping Weight | 0.17 kg |
| Shipping Dimensions | 9 × 9 × 4 cm |
What's in the box
- 1 x Pro-Range 11.1V 2200mAh 3S1P Li-Ion Battery Pack with JST-XH and Amass Nylon-T
Frequently Asked Questions
What voltage does this battery pack output?
How fast can I charge this pack?
Does the pack have built-in protection?
What connectors are on the battery?
What is included with the battery?
How should I store and care for the pack?
Overview
The Pro-Range 11.1V 2200mAh 3S1P Li-Ion Battery Pack is a self-contained three-cell power source assembled from N18650 cells in a 3S1P configuration. Each pack includes an integrated BMS, so protection circuitry travels with the battery rather than sitting in your device. The result is a compact block measuring 71 mm by 62 mm and weighing 166 g, sized for enclosures where space is limited but a stable 11.1V rail is required.
The pack is aimed at builders and hobbyists who want a ready-made lithium solution with defined connectors rather than loose cells and wiring. A 4-pin JST-XH connector and DC jack female input handle charging, while an Amass Nylon-T port handles discharge.
Key Features
- 3S1P N18650 configuration: three cells in series deliver 11.1V nominal with 2200mAh capacity.
- Integrated BMS: on-board protection manages the pack during charge and discharge.
- 2C continuous discharge: supports steady current draw suited to small RC and portable loads.
- 1C charging to 12.6V: a straightforward charge profile with a defined maximum voltage.
- Dual connector setup: JST-XH and DC jack female for charging, Amass Nylon-T for output.
- Compact footprint: 71 x 62 mm and 166 g keeps the pack easy to mount.
Specifications Explained
Voltage: 11.1V nominal reflects three lithium cells in series. The pack tops out at 12.6V when fully charged and should not be run below 8.7V under load, so your device or alarm should respect that floor.
Capacity and current: 2200mAh gives a useful runtime for moderate loads. The 2C continuous discharge rating describes the pack's steady output capability, while 1C charging keeps recharge times predictable and within the cell's comfort zone.
Connectors: the 4-pin JST-XH and DC jack female are the charge-side interfaces, and the Amass Nylon-T is the discharge port. Match your charger and device wiring to these before connecting anything.
Compatibility and Requirements
Use a charger designed for 3S lithium-ion packs with a 12.6V maximum charge voltage and a 1C charge rate. Your device should accept an Amass Nylon-T connection for discharge. Confirm that your load stays within the 2C continuous discharge rating and that your cut-off sits at or above 8.7V. Because the BMS is built in, do not add a second protection board in series.
Typical Uses
Small RC models, FPV ground equipment, portable instruments, DIY electronics projects and compact gadgets that need a rechargeable 11.1V rail. The pack also suits prototype enclosures where its 71 x 62 mm body fits neatly.
What's in the Box
- 1 x Pro-Range 11.1V 2200mAh 3S1P Li-Ion Battery Pack with JST-XH and Amass Nylon-T







Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 2200 mAh
- Continuous Discharge Current (A)
- 2C
- BMS (Y/N)
- Y
- Charge Connector
- DC JACK FEMALE/4 Pin JST XH
- Discharge Port
- Amass Nylon T



















