
1 / 3 · Click to enlarge
AI Summary
A ready-built 2S2P INR 18650 pack delivering 7.4V nominal and 5000mAh, with a 3C rating for up to 15A continuous discharge. The Amass Nylon T port makes it easy to wire into RC models, drones and power tools.
Key Highlights
- 5000mAh nominal capacity for longer runs between charges
- 7.4V nominal with 8.4V full charge for standard 2S setups
- 3C discharge rating supports up to 15A continuous output
- 2S2P configuration pairs series voltage with parallel capacity
- Amass Nylon T discharge port for high-current connections
- Compact pack format suited to RC, drone and tool builds
Ideal For
- RC car and boat hobbyists needing a compact 2S pack
- Drone and FPV builders working with 7.4V power systems
- Makers replacing cells in cordless power tools
- DIY electronics builders needing a 15A-capable 2S source
- Repairers servicing small battery-powered devices
Buying Tip
Confirm your charger is set for 2S lithium at 8.4V and that your wiring matches the Amass Nylon T plug before first use.
Elecvora expert review
Our verdict
A neat, ready-made 2S2P pack that saves you the work of building from loose 18650 cells. The 5000mAh capacity and 15A continuous ceiling cover many RC, drone and tool applications without overstating what the pack can do.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ready-built 2S2P pack with no cell assembly needed
- Useful 5000mAh capacity for longer run times
- 3C rating gives a clear 15A continuous limit
- Amass Nylon T port suits high-current wiring
Cons
- Charger and adapter leads are not included
- Continuous 15A ceiling limits very demanding builds
- Requires care with lithium charging and storage
Best for
Hobbyists and builders wanting a compact 2S pack for RC models, drones and tools
Not ideal for
High-burst applications that exceed 15A continuous draw
Specifications
| Nominal Capacity (mAh) | 5000 mAh |
|---|---|
| Nominal Voltage (V) | 7.4 |
| Charge Voltage(V) | 8.4 |
| Discharge Port | Amass Nylon T |
| Model Series | 2 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 12 × 8 × 7 cm |
What's in the box
- 1 x Pro-Range INR 18650 7.4V 5000mAh 3C 2S2P Li-Ion Battery Pack
Frequently Asked Questions
What voltage does this pack run at?
How much current can it deliver?
What connector does it have?
What is included in the box?
Can I use it in RC cars and drones?
How should I store the pack?
Overview
The Pro-Range INR 18650 7.4V 5000mAh 3C 2S2P Li-Ion Battery Pack is a ready-assembled power pack built from four 18650 lithium-ion cells. Two cells are wired in series to raise the voltage and two in parallel to raise the capacity, giving you a 7.4V nominal pack with 5000mAh on tap. It arrives with an Amass Nylon T discharge port, so you can connect it to matching high-current wiring without building a pack from loose cells.
This is a practical choice for hobbyists and builders who want a repeatable 2S power source for models and tools, and who are comfortable with lithium battery safety, charging and connector wiring.
Key Features
- 5000mAh nominal capacity for solid run time in models and tools.
- 7.4V nominal, 8.4V charge voltage matching standard 2S lithium charging.
- 3C discharge rating for up to 15A continuous output.
- 2S2P cell layout balancing voltage and capacity in one pack.
- Amass Nylon T discharge port for a secure high-current connection.
- Rechargeable design that supports repeated charge and discharge cycles.
Specifications Explained
Capacity and voltage
5000mAh tells you how much charge the pack holds, which translates into run time for a given load. The 7.4V nominal figure is the working voltage during discharge, while 8.4V is the point a fully charged pack reaches. Always charge to 8.4V using a suitable 2S lithium charger and never exceed that figure.
Discharge rate
The 3C rating means the pack can deliver current up to three times its capacity in amp-hours, which works out to about 15A continuous. That is enough for many RC models, drones and power tools, but it is not a high-burst pack, so match it to loads that stay within this continuous figure.
2S2P configuration
Two cells in series set the 7.4V nominal voltage, and two parallel strings double the capacity to 5000mAh. This layout gives a more stable output than a simple two-cell series pack while keeping the pack compact.
Connectors
The Amass Nylon T discharge port is the output connection for your model or device wiring. Check that your setup uses a compatible T-style plug before soldering or adapting anything.
Compatibility and Requirements
Use a charger designed for 2S lithium-ion packs with an 8.4V full-charge voltage. Your device wiring must accept an Amass Nylon T connector, or you will need to adapt it. Keep continuous current draw within the 15A figure. The pack is supplied as a single unit, so any charger, adapter lead or mounting hardware must be sourced separately.
Typical Uses
This pack suits RC cars and boats, drone and FPV builds that run on 2S power, cordless power tools in need of a replacement or custom pack, and a range of high-power DIY electronics projects. Its combination of moderate voltage, useful capacity and a 15A continuous ceiling makes it a versatile building block for hobby work.
What's in the Box
- 1 x Pro-Range INR 18650 7.4V 5000mAh 3C 2S2P Li-Ion Battery Pack
Quick specs
- Nominal Capacity (mAh)
- 5000 mAh
- Nominal Voltage (V)
- 7.4
- Charge Voltage(V)
- 8.4
- Discharge Port
- Amass Nylon T
- Model Series
- 2
- Shipping Weight
- 0.2 kg



















