Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 29.6V 4200mAh 8S1P lithium-ion pack with an 11C discharge rating and XT60 connector, sized for 7-inch FPV and E-VTOL drones. It delivers high voltage in a compact 616 g package for responsive throttle control.

Key Highlights

  • 29.6V nominal 8S1P architecture for high-voltage drone power systems
  • 4200mAh capacity balances flight time against all-up weight
  • 11C discharge rate supports the current demands of 7-inch builds
  • INR P42A cells selected for stable output and long cycle life
  • Amass XT60 discharge plug for a secure, low-resistance connection
  • Compact 66 × 74.1 × 44.4 mm body fits space-limited airframes

Ideal For

  • Pilots building or flying 7-inch FPV freestyle quads
  • Racers running 7-inch airframes on high-voltage setups
  • E-VTOL drone builders needing a compact 8S1P pack
  • Long-range 7-inch pilots who want a lighter power source
  • Makers upgrading an existing 29.6V platform

Buying Tip

Confirm your ESC, motors and charger are rated for a 29.6V 8S pack and that your charger can use the JST-RCY-BEC female charge lead before ordering.

Elecvora expert review

Our verdict

This is a well-considered pack for 7-inch and E-VTOL builds that want high voltage without a heavy brick. The 8S1P layout and 11C rating suit demanding throttle work, provided your electronics are rated for 29.6V.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 29.6V nominal output in a compact body
  • 11C discharge rate supports the current needs of larger multirotors
  • INR P42A cells aimed at durability and long cycle life
  • XT60 discharge plug is widely supported
  • Light 616 g weight relative to its voltage class

Cons

  • Requires an ESC and motor setup rated for 29.6V
  • Charging depends on a charger that matches the JST-RCY-BEC female lead
  • Not compatible with lower-voltage 6S platforms

Best for

7-inch FPV and E-VTOL pilots running high-voltage setups

Not ideal for

Builders using 6S or other lower-voltage electronics

Specifications

Battery TypeLi-Ion
Item TypeBattery Pack
Compatibility7-inch FPV & E-VTOL Drone Frames
Discharge Rate11C
Discharge ConnectorAmass XT60
Charge ConnectorJST-RCY-BEC Female
Configuration8S1P
Nominal Voltage (V)29.6V
Nominal Capacity (mAh)4200mAh
Shipping Weight0.700 kg
Shipping Dimensions12 × 13 × 9 cm

What's in the box

  • 1 x Pro-Range INR P42A 29.6V 4200mAh 11C Li-ion Battery Pack with XT-60

Frequently Asked Questions

What is the nominal voltage and configuration of this pack?
It is a 29.6V nominal pack in an 8S1P configuration, meaning eight cells in series with one parallel string.
Which drones is this battery intended for?
It is designed for 7-inch FPV and E-VTOL drone frames. Your ESC and motors must also be rated for the 29.6V nominal voltage.
What connectors does it use?
The discharge side uses an Amass XT60 connector, and the charge connection is a JST-RCY-BEC female lead.
What is the discharge rate and capacity?
The pack is rated at 11C with a nominal capacity of 4200mAh.
How much does the pack weigh and how large is it?
It weighs approximately 616 g and measures 66 × 74.1 × 44.4 mm.
What is included with the battery?
The package contains one Pro-Range INR P42A 29.6V 4200mAh 11C Li-ion Battery Pack with XT-60.

Overview

The Pro-Range INR P42A 8S1P pack is a lithium-ion battery designed for pilots who need serious voltage in a small footprint. With a nominal 29.6V and 4200mAh capacity, it suits 7-inch FPV quads and E-VTOL airframes where a conventional multi-cell lithium-polymer brick would add unnecessary bulk. The pack measures 66 × 74.1 × 44.4 mm and weighs about 616 g, so it fits into tighter frame layouts while keeping the build light enough to stay agile.

Inside, INR P42A cells are arranged in an 8S1P configuration, giving a single parallel string of eight cells in series. That layout keeps the wiring straightforward and delivers the high voltage these larger platforms run on. The 11C discharge rating means the pack can supply the current spikes that aggressive throttle inputs produce, so response stays smooth rather than sagging under load.

Key Features

  • High-voltage 8S1P design: 29.6V nominal output for 7-inch FPV and E-VTOL power systems.
  • 4200mAh capacity: a practical balance between usable flight time and pack weight.
  • 11C discharge rate: stable current delivery for punchy throttle response.
  • INR P42A cells: chosen for consistent performance and long cycle life.
  • Amass XT60 connector: a widely used, secure main power plug.
  • JST-RCY-BEC female charge lead: dedicated charge connection on the pack.
  • Compact body: 66 × 74.1 × 44.4 mm to suit space-limited frames.

Specifications Explained

Voltage and configuration: 29.6V nominal with an 8S1P layout tells you this is a high-voltage pack built from eight cells in series. Confirm your ESC, motors and flight controller are rated for this voltage before connecting it.

Capacity and discharge rate: 4200mAh sets the usable energy, while the 11C rating describes how quickly that energy can be delivered. Higher C ratings matter most on 7-inch and E-VTOL platforms, where throttle changes pull large currents. A pack that holds voltage under load gives you cleaner response and steadier flight characteristics.

Connectors: the Amass XT60 handles the main discharge path, and the JST-RCY-BEC female lead is the charge connection. Check that your charger and charge lead match this connector before your first cycle.

Compatibility and Requirements

This pack is intended for 7-inch FPV and E-VTOL drone frames. Your power system, including ESC and motors, must be rated for the 29.6V nominal voltage. The discharge side uses an Amass XT60 plug, so your power lead needs the matching XT60 counterpart. Charging is done through the JST-RCY-BEC female connector, so a compatible charger and charge lead are required. Verify frame space against the 66 × 74.1 × 44.4 mm dimensions and account for the 616 g pack weight in your build.

Typical Uses

  • 7-inch FPV freestyle and cruising builds
  • 7-inch racing airframes
  • E-VTOL drone projects
  • Long-range or payload-oriented 7-inch platforms

What's in the Box

1 x Pro-Range INR P42A 29.6V 4200mAh 11C Li-ion Battery Pack with XT-60.

Quick specs

Battery Type
Li-Ion
Item Type
Battery Pack
Compatibility
7-inch FPV & E-VTOL Drone Frames
Discharge Rate
11C
Discharge Connector
Amass XT60
Charge Connector
JST-RCY-BEC Female
See all specifications