
1 / 3 · Click to enlarge
AI Summary
A compact 29.6V 8400mAh 8S2P Li-ion pack built around INR P42A cells for 10-inch FPV and E-VTOL drones. Its 11C rating and XT60 connector deliver steady, responsive power for longer missions.
Key Highlights
- 8S2P Li-ion configuration with 29.6V nominal voltage
- 8400mAh capacity for extended flight duration
- 11C discharge rate for smooth, responsive throttle
- Premium INR P42A cells for durability and efficiency
- Amass XT60 discharge connector for secure power transfer
- Compact 169.7 x 75.5 x 44.3 mm form for 10-inch frames
Ideal For
- Long-range FPV pilots flying 10-inch frames
- E-VTOL builders needing a compact 8S Li-ion pack
- Industrial drone operators running inspection missions
- Mapping and survey teams wanting extended flight time
- Hobbyists upgrading to a higher-voltage Li-ion setup
Buying Tip
Check that your charger supports 8S Li-ion packs and the JST-RCY-BEC female charge connector before ordering, and confirm your frame can carry the roughly 1217 g pack.
Elecvora expert review
Our verdict
A well-judged pack for 10-inch FPV and E-VTOL builds that value steady endurance over burst extremes. The 8S2P layout and XT60 connector make it easy to integrate into existing high-voltage setups.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Balanced 8S2P layout for stable voltage under load
- 8400mAh capacity supports longer missions
- Compact dimensions for its class
- Premium INR P42A cells
- Standard XT60 discharge connector
Cons
- Requires a charger that supports 8S Li-ion packs
- At roughly 1217 g it adds noticeable weight to a build
- Charge connector is JST-RCY-BEC female, so check your lead compatibility
Best for
Long-range FPV and E-VTOL pilots flying 10-inch frames
Not ideal for
Pilots needing extreme burst discharge rates or smaller 5-inch builds
Specifications
| Battery Type | Li-Ion |
|---|---|
| Item Type | Battery Pack |
| Compatibility | 10-inch FPV & E-VTOL Drone Frames |
| Discharge Rate | 11C |
| Discharge Connector | Amass XT60 |
| Charge Connector | JST-RCY-BEC Female |
| Configuration | 8S2P |
| Nominal Voltage (V) | 29.6V |
| Nominal Capacity (mAh) | 8400mAh |
| Shipping Weight | 1.319 kg |
| Shipping Dimensions | 19 × 14 × 9 cm |
What's in the box
- 1 x Pro-Range INR P42A 29.6V 8400mAh 11C Li-ion Battery Pack with XT-60
Frequently Asked Questions
What drone frames is this battery designed for?
What is the nominal voltage and capacity?
Which connectors does it use?
What is included in the package?
What discharge rate does it support?
How should I care for this Li-ion pack?
Overview
The Pro-Range INR P42A is a lithium-ion battery pack designed around the power and endurance needs of 10-inch FPV and E-VTOL drones. It uses an 8S2P configuration of INR P42A cells to reach a 29.6V nominal voltage and 8400mAh nominal capacity, giving builders a compact energy source for longer aerial missions.
Rather than chasing extreme burst figures, this pack is tuned for stable output. The 11C discharge rate supports smooth throttle response and consistent flight efficiency, which matters on long-range and industrial platforms where predictable power delivery is as important as raw capacity.
Key Features
- 8S2P configuration: eight cells in series with two parallel strings for balanced voltage and improved energy density.
- 8400mAh nominal capacity: supports extended flight duration on demanding missions.
- 29.6V nominal voltage: suited to higher-voltage drone power systems.
- 11C discharge rate: delivers responsive power without aggressive peaks.
- INR P42A cells: chosen for durability and high efficiency.
- Amass XT60 discharge connector: a widely used, secure power connection.
- Compact build: measures 169.7 x 75.5 x 44.3 mm and weighs approximately 1217 g.
Specifications Explained
Voltage and configuration: the 8S2P layout means eight cells are wired in series to raise voltage to 29.6V nominal, while two parallel strings increase capacity and share current load. This arrangement helps keep voltage steadier under load than a single-string pack of the same size.
Capacity: at 8400mAh, the pack stores enough energy for longer sorties, making it a practical choice for missions where flight time is the limiting factor.
Discharge rate: the 11C rating describes how quickly the pack can deliver current relative to its capacity. In practice, it supports smooth, continuous power rather than short, extreme bursts.
Connectors: the Amass XT60 handles discharge, while a JST-RCY-BEC female connector is provided for charging. A 9-pin JST-XH balance connector is included for cell-level monitoring.
Compatibility and Requirements
This pack is intended for 10-inch FPV and E-VTOL drone frames. Your power system should be built for a 29.6V nominal lithium-ion pack, and your charger must support the 8S configuration and the JST-RCY-BEC female charge connector. Confirm that your frame has room for the 169.7 x 75.5 x 44.3 mm pack and can carry roughly 1217 g before installation.
Typical Uses
The pack suits long-range FPV builds, industrial inspection drones and E-VTOL projects that need steady energy over extended flights. It is also a reasonable option for 10-inch platforms used in mapping, survey and general aerial work where consistent output is preferred.
What's in the Box
1 x Pro-Range INR P42A 29.6V 8400mAh 11C Li-ion Battery Pack with XT-60.
Quick specs
- Battery Type
- Li-Ion
- Item Type
- Battery Pack
- Compatibility
- 10-inch FPV & E-VTOL Drone Frames
- Discharge Rate
- 11C
- Discharge Connector
- Amass XT60
- Charge Connector
- JST-RCY-BEC Female



















