
1 / 3 · Click to enlarge
AI Summary
A compact 11.1V 5000mAh 3S2P NMC 18650 pack with built-in BMS, JST XH charge lead and Amass T plug discharge port. It delivers a stable 12V-class supply in a 190g package for RC and DIY builds.
Key Highlights
- 11.1V nominal, 5000mAh capacity in a 3S2P 18650 layout
- Integrated BMS for pack-level protection
- 3C continuous discharge, 1C charge rate
- 4-pin JST XH charge lead and Amass Nylon T discharge plug
- Compact 74 x 48mm body weighing about 190g
- QC tested pack with BIS-certified NMC cells
Ideal For
- RC car and boat hobbyists needing a compact 3S pack
- FPV pilots powering ground stations and goggles
- Makers building portable 12V electronics projects
- Robotics and automation hobbyists
- DIY enthusiasts replacing tired 3S packs
Buying Tip
Confirm your charger supports a 3S Li-ion profile with a 12.6V cutoff and a JST XH balance lead before ordering, and check that your device uses an Amass T plug.
Elecvora expert review
Our verdict
A tidy, protected 3S2P pack that trades extreme current for compact size, sensible connectors and a built-in BMS. It is a practical choice for 12V-class RC and DIY builds where fit and reliability matter more than punch.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Built-in BMS protection at pack level
- Light 190g body with a compact 74 x 48mm footprint
- Separate charge and discharge connectors simplify wiring
- 3C continuous discharge is adequate for moderate loads
- QC tested with BIS-certified cells
Cons
- 3C rating limits use in high-current applications
- Requires a compatible 3S Li-ion charger, not included
- Amass T plug may need adapting for some devices
Best for
Compact RC models and DIY projects needing a protected 11.1V supply
Not ideal for
High-draw setups that need well above a 3C continuous discharge rate
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 5000 mAh |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | Y |
| Charge Connector | 4 Pin JST XH |
| Discharge Port | Amass Nylon T |
| Max. Charging Voltage (V) | 12.6 |
| Max. Discharging Voltage (V) | 8.7 |
| Charging Current | 1C |
| Length (mm) | 74 |
| Width (mm) | 48 |
| Weight (g) | 190 |
| Model Series | 3 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 9 × 9 × 4 cm |
What's in the box
- 1 x Pro-Range NMC 18650 11.1V 5000mAh 3C 3S2P Li-Ion Battery Pack
Frequently Asked Questions
What voltage does this pack output?
How is the pack charged?
What connector is on the discharge side?
Does it have built-in protection?
What is included with the battery?
How should I store the pack?
Overview
The Pro-Range NMC 18650 11.1V 5000mAh pack is a ready-built 3S2P lithium-ion battery designed for projects that need a dependable 12V-class supply without the bulk of a larger pack. Six NMC 18650 cells are arranged in a 3-series, 2-parallel configuration, giving 11.1V nominal and 5000mAh of capacity in a body measuring 74 x 48mm and weighing around 190g.
Unlike a bare cell holder, this is a finished pack: an integrated BMS manages the cells, a 4-pin JST XH connector is provided for charging, and an Amass Nylon T plug handles discharge. That makes it a practical drop-in power source for RC models, bench electronics and portable builds.
Key Features
- 3S2P NMC 18650 construction for a stable 11.1V nominal output with 5000mAh capacity.
- Built-in BMS to protect the pack during charge and discharge.
- 3C continuous discharge and 1C charging for balanced, predictable performance.
- Dual connector design: 4-pin JST XH for charging, Amass Nylon T for discharge.
- Compact and light at roughly 190g, easy to fit into tight enclosures.
- QC tested packs built with BIS-certified cells.
Specifications Explained
Voltage and capacity
Nominal voltage is 11.1V, with a maximum charging voltage of 12.6V and a maximum discharging voltage of 8.7V. The 5000mAh rating describes stored capacity, so runtime depends on the current your device draws.
Current ratings
The 3C continuous discharge rating sets the pack's working current ceiling, and the 1C charge rating defines the recommended charging current. Both figures scale with the 5000mAh capacity, so check them against your load and charger before use.
Connectors
Charging runs through a 4-pin JST XH connector, which also gives access to individual cell groups for balanced charging. The Amass Nylon T plug on the discharge side is a common, robust connector for RC and hobby wiring.
Size and weight
At 74 x 48mm and about 190g, the pack fits many small-to-medium compartments. Always confirm clearance for the connector leads and any wiring bend radius.
Compatibility and Requirements
You will need a charger suited to a 3S lithium-ion pack with a 12.6V maximum charge voltage and a matching JST XH connection. The device side must accept an Amass Nylon T plug, or you can adapt the wiring to your own harness. Never charge or discharge the pack outside the voltage limits stated above.
Typical Uses
This pack suits RC cars and boats, FPV ground stations and goggles, portable test gear, robotics, LED lighting rigs and DIY electronics projects that need a compact 12V-class battery with a protected, connector-ready format.
What's in the Box
- 1 x Pro-Range NMC 18650 11.1V 5000mAh 3C 3S2P Li-Ion Battery Pack







Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 5000 mAh
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- Y
- Charge Connector
- 4 Pin JST XH
- Discharge Port
- Amass Nylon T



















