
1 / 3 · Click to enlarge
AI Summary
A protected 2S1P 18650 lithium-ion pack delivering 7.4V nominal and 3500mAh with a 3C continuous discharge rating. Its built-in BMS and compact 70 x 40 mm footprint make it a tidy power source for RC, FPV and portable electronics builds.
Key Highlights
- 7.4V nominal 2S1P configuration with 3500mAh capacity
- 3C continuous discharge rating for steady current draw
- Integrated BMS for charge and discharge protection
- Compact 70 x 40 mm body weighing about 142 g
- 18650 NMC cell format for familiar, serviceable builds
- Suitable for RC, FPV, drone and portable device projects
Ideal For
- RC hobbyists building compact 2S-powered models
- FPV and drone makers needing a lightweight 7.4V pack
- Makers and prototypers building portable electronics
- Test rig and bench setup builders
- OEM and small-batch product developers
Buying Tip
Check that your device and charger are rated for a 2S lithium-ion pack, and keep continuous current draw within the 3C rating before you connect it.
Elecvora expert review
Our verdict
A sensible protected 2S pack for steady, moderate-current builds where size and weight matter more than burst power. The built-in BMS and defined 3C rating make it predictable to plan around.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Built-in BMS adds protection during charge and discharge
- Compact 70 x 40 mm body and about 142 g weight
- Clear 3C continuous rating for load planning
- 3500mAh capacity suits longer low-current sessions
- Standard 18650 NMC cell format
Cons
- 3C continuous rating limits high-burst applications
- Connector type and wiring are not specified
- Requires a separate 2S lithium-ion charger
Best for
Compact RC, FPV and portable electronics builds with moderate continuous current
Not ideal for
High-burst applications that exceed the 3C continuous rating
Specifications
| Nominal Voltage (V) | 7.4 |
|---|---|
| Nominal Capacity (mAh) | 3500 mAh |
| Continuous Discharge Current (A) | 3C |
| BMS (Y/N) | Y |
| Length (mm) | 70 |
| Width (mm) | 40 |
| Weight (g) | 142 |
| Model Series | 2 |
| Shipping Weight | 0.196 kg |
| Shipping Dimensions | 12 × 11 × 6.5 cm |
What's in the box
- 1 x Pro-Range NMC N18650CR-35E 7.4V 3500mAh 2S1P 3C Li-ion Battery Pack
Frequently Asked Questions
What voltage does this battery pack provide?
What is the continuous discharge rating?
Does the pack include protection circuitry?
What charger should I use?
What are the pack's dimensions and weight?
What is included in the package?
Overview
The Pro-Range NMC N18650CR-35E is a two-cell lithium-ion battery pack arranged in a 2S1P configuration. It provides a 7.4V nominal output with 3500mAh of capacity, and it is assembled from 18650-format NMC cells. A built-in battery management system (BMS) is included, so the pack is protected rather than a bare cell assembly.
With a body measuring about 70 mm long and 40 mm wide and weighing roughly 142 g, the pack is compact enough for small enclosures, handheld devices and lightweight RC platforms. The 3C continuous discharge rating defines the steady current the pack is intended to supply.
Key Features
- 2S1P configuration: two 18650 cells in series with a single parallel string for a 7.4V nominal pack.
- 3500mAh capacity: useful runtime for low-to-moderate current devices.
- 3C continuous discharge: a defined, repeatable current ceiling for steady loads.
- Built-in BMS: onboard protection circuitry for safer charging and discharging.
- Compact footprint: 70 x 40 mm body that fits tight builds.
- Lightweight: approximately 142 g, keeping payload and handling manageable.
Specifications Explained
7.4V nominal is the typical operating voltage of a two-cell lithium-ion pack. Devices designed around a 2S lithium-ion supply are the natural match; check that your equipment accepts this voltage range before connecting.
3500mAh describes stored capacity. Higher-capacity packs generally run longer between charges at the same current draw, which is helpful for devices used over extended sessions.
3C continuous discharge is the sustained current rating relative to capacity. It tells you the pack is intended for steady, moderate loads rather than high-burst applications, so size your build around continuous draw.
The BMS is the protection board inside the pack. It is a safety layer, not a charger, so you still need a suitable lithium-ion charger for a 2S pack.
Compatibility and Requirements
This pack is intended for equipment that accepts a 7.4V nominal two-cell lithium-ion supply. Confirm the voltage range and current demand of your device before use. Because the pack includes a BMS, charge it with a charger appropriate for a 2S lithium-ion battery. Connector type and wiring are not specified in the product data, so inspect the pack and plan your connection accordingly.
Typical Uses
Common applications include RC models, FPV and drone projects, portable electronic devices, test rigs and small prototype builds. The 2S format and compact dimensions make it a practical fit wherever a lightweight 7.4V source is needed and current draw stays within the 3C continuous rating.
What's in the Box
1 x Pro-Range NMC N18650CR-35E 7.4V 3500mAh 2S1P 3C Li-ion Battery Pack.







Quick specs
- Nominal Voltage (V)
- 7.4
- Nominal Capacity (mAh)
- 3500 mAh
- Continuous Discharge Current (A)
- 3C
- BMS (Y/N)
- Y
- Length (mm)
- 70
- Width (mm)
- 40



















