Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

ReadytoSky A2212 1000KV brushless motor for drones, compatible with 2S-3S LiPo and 12A current. Lightweight at 64g with 3.17mm shaft, includes prop adapter and mount.

Key Highlights

  • 1000KV rating for balanced thrust and efficiency
  • Accepts 2S to 3S LiPo batteries
  • 12A current capacity for moderate power setups
  • Lightweight 64g design suits multirotor frames
  • 3.17mm shaft fits common prop adapters
  • Includes prop adapter, X-type mount, and screws

Ideal For

  • Drone builders assembling 250–450 class quadcopters
  • RC hobbyists upgrading or replacing motors in multirotors
  • Educators and students working on drone projects
  • Fixed-wing pilots needing a 1000KV outrunner
  • Budget-conscious makers building custom drones

Buying Tip

Check that your ESC is rated for at least 12A and your frame’s motor mount holes match the included X-type bracket before ordering.

Elecvora expert review

Our verdict

The ReadytoSky A2212 1000KV is a dependable, budget-friendly brushless motor that suits entry-level multirotors and RC planes. It offers a good balance of weight, efficiency, and power for its class, though it lacks premium features like sealed bearings.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight 64g design
  • Includes prop adapter and mount
  • Bi-directional rotation via wire swap
  • Compatible with common 2S-3S LiPos

Cons

  • Requires soldering to ESC
  • Propeller not included
  • Limited to 12A max current

Best for

Budget drone builds and RC trainers

Not ideal for

High-performance racing or heavy-lift drones

Specifications

Motor KV (RPM/V)1000 KV
Motor TypeBrushless Motor
Compatible LiPO Batteries2S to 3S
Current Capacity (A)12
No-Load Current (mA)500
Max. Efficiency Current (A)4 ~ 10
Shaft Diameter3.17 mm
Maximum Efficiency0.8
Length (mm)27.5
Width (mm)27
Weight (g)64
Shipping Weight0.067 kg
Shipping Dimensions12 × 6 × 5 cm

What's in the box

  • 1 x A2212 1000KV BLDC Brushless DC Motor
  • 1 x Prop Adapter
  • 1 x X-type Motor Holder
  • Set of screws

Frequently Asked Questions

What battery should I use with this motor?
Use a 2S or 3S LiPo battery. Do not exceed 3S as the motor is not rated for higher voltages.
Does this motor come with a propeller?
No, the propeller is not included. You will need to purchase a suitable prop separately.
How do I reverse the motor direction?
The motor is bi-directional. Simply swap any two of the three motor wires connected to the ESC to change rotation direction.
What ESC is recommended?
Use a brushless ESC rated for at least 12A. A 20A or 30A ESC provides headroom and is commonly used with this motor.
Is the motor mount included?
Yes, an X-type motor holder and a set of screws are included in the package.
How much does the motor weigh?
The motor weighs approximately 64 grams.

Overview

The ReadytoSky A2212 1000KV brushless motor is a compact outrunner built for drone and RC aircraft enthusiasts. Its 1000KV rating means it spins at 1000 RPM per volt, providing a versatile power curve for multirotor platforms. Weighing only 64 grams and measuring 27.5mm in length with a 27mm diameter, it suits lightweight quadcopter and hexacopter frames. The motor operates on 2S to 3S LiPo batteries and handles up to 12A current, with a no-load current of 500mA and maximum efficiency of 0.8. The 3.17mm shaft accommodates standard prop adapters, and the package includes an X-type motor mount and screws for straightforward installation.

Key Features

  • 1000KV brushless outrunner: Delivers a practical balance of speed and torque for multirotor flight.
  • 2S–3S LiPo compatibility: Works with common battery packs used in small to mid-size drones.
  • 12A current capacity: Supports moderate power demands for sport and endurance flying.
  • Lightweight construction: At 64g, it helps keep overall craft weight low.
  • 3.17mm shaft: Fits widely available prop adapters and collets.
  • Complete mounting set: Includes prop adapter, X-type motor holder, and screws.

Specifications Explained

Motor KV (1000KV): Indicates the motor’s RPM per volt. With a 3S LiPo (11.1V nominal), expect around 11,100 RPM unloaded—suitable for 8- to 10-inch props on multirotors.

Compatible LiPO Batteries (2S to 3S): The motor is designed for 2-cell (7.4V) or 3-cell (11.1V) packs. Using higher cell counts may exceed safe limits.

Current Capacity (12A): The maximum current the motor can handle. Ensure your ESC is rated at least 12A and your battery can supply the required current.

No-Load Current (500mA): The current drawn with no propeller attached, useful for estimating baseline power consumption.

Max Efficiency Current (4–10A): The motor performs most efficiently within this current range, balancing thrust and battery life.

Shaft Diameter (3.17mm): A common size that accepts many prop adapters and collet-style mounts.

Maximum Efficiency (0.8): Indicates that 80% of electrical input is converted to mechanical output under optimal conditions.

Weight (64g): Light enough for weight-sensitive builds without sacrificing durability.

Compatibility and Requirements

This motor requires a brushless ESC rated for at least 12A and a 2S or 3S LiPo battery. It is bi-directional, meaning rotation direction can be reversed by swapping any two of the three motor wires. A propeller suitable for 1000KV motors on 2S–3S is needed (not included). The included X-type mount fits frames with standard 16×19mm or 19×19mm hole patterns (check your frame).

Typical Uses

Ideal for quadcopters and hexacopters in the 250–450 size range, as well as fixed-wing RC aircraft requiring a 1000KV outrunner. Commonly used in budget builds, trainer drones, and aerial photography platforms where efficiency and weight are priorities.

What's in the Box

  • 1 x A2212 1000KV brushless motor
  • 1 x prop adapter
  • 1 x X-type motor holder
  • Set of screws

Quick specs

Motor KV (RPM/V)
1000 KV
Motor Type
Brushless Motor
Compatible LiPO Batteries
2S to 3S
Current Capacity (A)
12
No-Load Current (mA)
500
Max. Efficiency Current (A)
4 ~ 10
See all specifications