Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This compact RS232 to TTL serial interface module uses a MAX3232 transceiver to bridge TTL UART devices and RS232 ports. It includes a DB9 connector and Dupont cables for quick connection to microcontrollers or breadboards.

Key Highlights

  • MAX3232 transceiver for reliable RS232 to TTL conversion
  • DB9 connector and 4-pin header with Dupont cables
  • Operates from 3.0V to 5.5V for flexible power
  • Supports data rates up to 120 kbps
  • Compact 45 x 32 mm board, pre-assembled
  • Works with many microcontrollers including STM32 and PIC

Ideal For

  • Electronics hobbyists working with microcontrollers
  • Technicians repairing or upgrading set-top boxes and DVDs
  • Developers needing serial communication between PC and TTL devices
  • Students learning about serial interfaces and UART
  • Makers integrating RS232 devices into breadboard projects

Buying Tip

Check that your target device uses TTL-level UART (3.3V or 5V) and that you have a free COM port or USB-to-RS232 adapter for the DB9 side.

Elecvora expert review

Our verdict

This module offers a straightforward and reliable way to interface TTL serial devices with RS232 ports. Its compact size, wide voltage range, and included cables make it a convenient choice for many electronics projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-assembled and ready to use
  • Wide operating voltage (3.0V–5.5V)
  • Includes Dupont cables for immediate connection
  • Compact and lightweight design
  • Based on the proven MAX3232 IC

Cons

  • Dupont cable colors may vary, requiring verification
  • No mounting holes for secure installation
  • Requires basic knowledge of serial communication

Best for

Hobbyists and professionals needing a simple RS232 to TTL interface

Not ideal for

Those requiring isolated or high-speed serial communication beyond 120 kbps

Specifications

Model No. / NameInterface Module
Length (mm)45
Width (mm)32
Weight (g)12
Shipping Weight0.016 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 1 x RS232 to TTL Serial Interface Module
  • 1 x 4-pin Dupont cable (20 cm)

Frequently Asked Questions

What is the purpose of this module?
It converts RS232 signal levels to TTL levels (and vice versa) so that devices with different serial interfaces can communicate.
What voltage does the module require?
The module operates from 3.0V to 5.5V, making it compatible with both 3.3V and 5V logic systems.
Which microcontrollers are compatible?
It works with many microcontrollers that have a UART, including those from ATMEL, PIC, STC, NXP, Renesas, and STM32.
What is included in the package?
You receive one RS232 to TTL Serial Interface Module and one 4-pin Dupont cable (20 cm). The cable color may vary.
Can I use this module with a breadboard?
Yes, the included Dupont cables allow easy connection to a breadboard or microcontroller project board.
What is the maximum data rate?
The module supports data rates up to 120 kbps, which is sufficient for most serial communication tasks.

Overview

The RS232 to TTL Serial Interface Module is a pre-assembled board designed to convert between RS232 and TTL serial signal levels. At its core is the MAX3232 transceiver IC, which provides the necessary electrical conversion for reliable communication between devices with different serial interfaces. The board includes a DB9 connector for direct connection to a computer's COM port and four header pins with Dupont cables for easy wiring to breadboards or microcontroller projects. This makes it a practical tool for developers, hobbyists, and technicians who need to interface TTL-level UART devices with RS232 systems.

Key Features

  • MAX3232 transceiver IC for stable RS232 to TTL conversion
  • DB9 connector for direct connection to RS232 ports
  • 4-pin header with Dupont cables for quick hookup to breadboards and MCUs
  • Wide operating voltage from 3.0V to 5.5V
  • Data rate up to 120 kbps for most serial communication needs
  • Compact dimensions of 45 mm by 32 mm and a weight of 12 g

Specifications Explained

The MAX3232 IC is a dual transmitter/receiver that requires four 0.1µF charge-pump capacitors, which are already mounted on the board. It operates over a voltage range of 3.0V to 5.5V, making it compatible with both 3.3V and 5V logic systems. The maximum guaranteed data rate is 120 kbps, which is sufficient for typical serial communication tasks such as firmware programming and data logging. The board measures 45 mm in length and 32 mm in width, with a weight of just 12 grams, so it won't take up much space in your project enclosure. The DB9 connector is soldered at one end, and the four header pins at the other end allow you to connect the Dupont cables to your target device.

Compatibility and Requirements

This module is designed to work with systems that have a UART interface, including many microcontrollers from ATMEL, PIC, STC, NXP, Renesas, and STM32. It requires a power supply between 3.0V and 5.5V, which can often be taken from the target board or an external source. The Dupont cables provided may vary in color. No additional drivers are needed; the module simply converts signal levels.

Typical Uses

Common applications include programming STC, NXP, Renesas, and STM32 microcontrollers, radio modifications, phone flashing, XBOX360 flashing, GPS interfacing, vehicle detection, DVD flashing, hard disk repair, and set-top box upgrades. It is also useful for connecting serial devices to a PC for diagnostics or data transfer.

What's in the Box

1 x RS232 to TTL Serial Interface Module and 1 x 4-pin Dupont cable (20 cm). The color of the Dupont cables may vary.

Quick specs

Model No. / Name
Interface Module
Length (mm)
45
Width (mm)
32
Weight (g)
12
Shipping Weight
0.016 kg
Shipping Dimensions
7 × 5 × 2 cm
See all specifications