Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Grove expansion shield for Arduino that replaces messy jumper wires with 16 plug-in connectors. It offers four analog, seven digital, four I2C and one UART port, plus a 3.3V/5V switch and reset button.

Key Highlights

  • 16 on-board Grove connectors for quick, wire-free module hook-up
  • Four analog ports: A0, A1, A2 and A3
  • Seven digital ports: D2 through D8
  • Four I2C ports plus one UART port
  • Voltage switch selects 3.3V or 5V operation
  • Reset button and green power LED on board

Ideal For

  • Arduino makers building multi-sensor projects
  • Students and educators teaching electronics prototyping
  • Grove module users who want tidy wiring
  • Prototypers testing I2C and UART devices
  • Hobbyists replacing breadboard and jumper wires

Buying Tip

Check your Arduino board first: set the shield's switch to 5V for Arduino Uno and 3.3V for Seeeduino Arch before powering up.

Elecvora expert review

Our verdict

The Base Shield V2 is a practical accessory for anyone who works with Grove modules and Arduino boards. It removes most of the wiring clutter and adds useful ports, though it is a connector board rather than a sensor itself.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 16 Grove connectors cover analog, digital, I2C and UART needs
  • Voltage switch supports both 5V and 3.3V boards
  • On-board reset button and power LED add convenience
  • Arduino Uno R3 pinout for straightforward mounting

Cons

  • Arduino board and Grove modules are not included
  • The switch position must be set correctly to avoid voltage mismatch

Best for

Arduino users who want quick, tidy connections to Grove modules

Not ideal for

Projects that do not use Grove modules or compatible Arduino boards

Specifications

Model No. / NameOther Shields
Analog PortInclude 4 anlog ports, A0, A1, A2 and A3.
Digital PortInclude 7 digital ports, D2, D3, D4, D5, D6, D7 and D8.
UART PortUART port.
I2C Port4 I2C ports.
Switch/ButtonWhen using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v.
Reset Button (Y/N)Reset the Arduino board.
PWR LEDThe Green LED turns on when power on.
Shipping Weight0.02 kg
Shipping Dimensions10 × 7 × 3 cm

What's in the box

  • 1 x Seeed Studio Base Shield V2

Frequently Asked Questions

What is the Seeed Studio Base Shield V2 used for?
It connects Grove modules to an Arduino board through 16 on-board connectors, replacing breadboards and jumper wires for sensor and output projects.
Which boards is it compatible with?
The pinout matches the Arduino Uno R3. It is intended for Arduino Uno and Seeeduino Arch boards.
How should I set the voltage switch?
Turn the switch to the 5V position when using an Arduino Uno, and to the 3.3V position when using a Seeeduino Arch.
How many ports does the shield have?
It has 16 Grove connectors: four analog ports (A0 to A3), seven digital ports (D2 to D8), four I2C ports and one UART port.
Is the Arduino board included?
No. The package contains one Seeed Studio Base Shield V2; the Arduino board and Grove modules are sold separately.
What does the green LED indicate?
The green PWR LED turns on when the shield is powered.

Overview

The Seeed Studio Base Shield V2 is an expansion board that makes Arduino prototyping cleaner and faster. Rather than wiring every sensor and LED with loose jumper wires, you plug Grove modules straight into the shield. The board carries 16 Grove connectors, so a project with several sensors no longer turns into a nest of cables on top of a breadboard.

The shield follows the Arduino Uno R3 pinout and sits directly on the Arduino board. It brings out the most commonly used pins as Grove ports and adds a reset button, a green power LED, ICSP pins and a voltage selection switch.

Key Features

  • 16 Grove connectors: four analog, seven digital, four I2C and one UART port in a single shield.
  • Analog ports: A0, A1, A2 and A3 for analog sensors and inputs.
  • Digital ports: D2, D3, D4, D5, D6, D7 and D8 for digital sensors, buttons and outputs.
  • I2C and UART: four I2C ports for bus-based modules and one UART port for serial devices.
  • Voltage switch: set to 5V when using an Arduino Uno, or 3.3V when using a Seeeduino Arch.
  • Reset button and PWR LED: reset the Arduino board and confirm power at a glance.

Specifications Explained

The port count is the headline specification. Four analog inputs are enough for common analog sensors such as light or position sensing. Seven digital pins cover buttons, relays, buzzers and digital sensors. The four I2C ports are useful because many Grove modules share the I2C bus, so several devices can run at once. The single UART port is intended for serial communication modules.

The voltage switch matters for safe operation. Match the switch position to the board in use: 5V for Arduino Uno and 3.3V for Seeeduino Arch. The on-board reset button saves reaching for the Arduino's own reset control, and the green LED confirms the shield is powered.

Compatibility and Requirements

The pinout is the same as the Arduino Uno R3, and the shield is designed for use with Arduino Uno and Seeeduino Arch boards. Grove modules connect through the on-board connectors. No additional wiring is needed for Grove devices, though the Arduino board itself is not included.

Typical Uses

  • Sensor-rich Arduino learning projects and classroom builds
  • Rapid prototyping with multiple Grove modules at once
  • I2C projects using several devices on the same bus
  • Serial communication experiments through the UART port
  • Keeping a workbench tidy by removing loose jumper wires

What's in the Box

One Seeed Studio Base Shield V2. Arduino board and Grove modules are sold separately.

Quick specs

Model No. / Name
Other Shields
Analog Port
Include 4 anlog ports, A0, A1, A2 and A3.
Digital Port
Include 7 digital ports, D2, D3, D4, D5, D6, D7 and D8.
UART Port
UART port.
I2C Port
4 I2C ports.
Switch/Button
When using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v.
See all specifications