
1 / 4 · Click to enlarge
AI Summary
A non-contact infrared temperature sensor based on the MLX90615, offering 1°C accuracy and 0.02°C resolution over SMBus. It lets you measure object temperature remotely with minimal wiring and no physical contact.
Key Highlights
- Non-contact temperature measurement using MLX90615 thermopile
- 1°C accuracy over a wide temperature range
- 0.02°C high measurement resolution
- SMBus interface supports up to 127 sensors on two wires
- Embedded emissivity compensation for consistent readings
- Low power consumption with power-saving mode
Ideal For
- Makers building Arduino-based temperature monitoring projects
- Engineers needing non-contact sensing in embedded systems
- Students learning about infrared thermometry and SMBus
- Developers creating multi-sensor thermal arrays
- Hobbyists automating temperature-based tasks
Buying Tip
Check that your microcontroller board can provide 2.6–3.4V and supports SMBus or I2C before purchasing this sensor.
Elecvora expert review
Our verdict
The Seeed Studio Grove Digital Infrared Temperature Sensor offers a practical non-contact measurement solution with good accuracy and easy integration. Its SMBus support for multiple sensors makes it versatile for distributed sensing.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High resolution of 0.02°C
- Wide object temperature range
- Simple two-wire interface
- Low power consumption
- Grove connector simplifies wiring
Cons
- Requires SMBus/I2C host support
- Limited to 3.4V maximum supply
- Emissivity compensation may need adjustment for some materials
Best for
Makers and engineers needing reliable non-contact temperature sensing in embedded projects.
Not ideal for
Applications requiring measurement above 115°C object temperature or below -40°C.
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Temperature Sensor |
| Operating Voltage (V) | 2.6 to 3.4 |
| Rated current (mA) | 1.4~1.5mA |
| Dimensions (L x W x H) mm | 20x40x9.6mm |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 7 × 5 × 2 cm |
What's in the box
- 1 x Seeed Studio Grove Digital Infrared Temperature Sensor
- 1 x JST cable
Frequently Asked Questions
What is the measurement range of this sensor?
Can I connect multiple sensors to one microcontroller?
What voltage does the module require?
Is a cable included?
Does the sensor need calibration?
How do I care for the sensor?
Overview
The Seeed Studio Grove Digital Infrared Temperature Sensor is a compact module for measuring temperature without physical contact. It combines an MLX90615 IR-sensitive thermopile detector and a signal conditioning chip in one package, so you can read object temperature directly over a digital bus. The Grove connector and included JST cable simplify wiring to compatible development boards.
Key Features
- Non-contact sensing: Measure the temperature of an object from a distance, avoiding interference with the target.
- High accuracy: ±1°C accuracy across a wide range helps ensure dependable readings.
- Fine resolution: 0.02°C measurement resolution captures small temperature differences.
- SMBus interface: Up to 127 sensors can share a common two-wire bus, enabling multi-point monitoring.
- Embedded compensation: Emissivity compensation is built in, reducing the need for external correction.
- Power saving: A power-saving mode helps reduce current draw when continuous measurement is not required.
Specifications Explained
The module operates from 2.6V to 3.4V and draws a rated current of 1.4mA to 1.5mA, making it suitable for low-power embedded systems. Its small 20 x 40 x 9.6mm footprint allows easy integration into tight enclosures. The sensor temperature range is -40 to 85°C, while the object temperature range extends from -40 to 115°C, covering many environmental and industrial measurement scenarios. The 16-bit ADC and DSP unit contribute to stable, precise output.
Compatibility and Requirements
The Grove Digital Infrared Temperature Sensor communicates via SMBus, a two-wire protocol. It is designed for use with microcontroller boards that support SMBus or I2C communication. A compatible Grove cable is included for connection. Ensure your host board can supply the required 2.6–3.4V operating voltage, either directly or through level shifting.
Typical Uses
- Non-contact temperature monitoring in DIY electronics projects
- Thermal profiling of components or surfaces
- Automated temperature sensing in Arduino-based systems
- Educational demonstrations of infrared thermometry
- Multi-point temperature logging with multiple sensors on one bus
What's in the Box
1 x Seeed Studio Grove Digital Infrared Temperature Sensor and 1 x JST cable.
Quick specs
- Item Type
- Sensor
- Model No. / Name
- Temperature Sensor
- Operating Voltage (V)
- 2.6 to 3.4
- Rated current (mA)
- 1.4~1.5mA
- Dimensions (L x W x H) mm
- 20x40x9.6mm
- Shipping Weight
- 0.02 kg


















