Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Grove HCHO Sensor detects formaldehyde and other VOCs from 1 to 50 ppm with a simple analog output. Its Grove connector and 5V operation make it easy to add gas sensing to your microcontroller projects.

Key Highlights

  • Detects HCHO, benzene, toluene, and alcohol
  • Measuring range of 1 to 50 ppm
  • 5V operating voltage with Grove interface
  • Semiconductor WSP2110 sensor element
  • Compact and lightweight for embedded use

Ideal For

  • Makers building indoor air quality monitors
  • Arduino and Raspberry Pi enthusiasts
  • Students learning about gas sensors
  • DIY environmental data logging projects
  • Smart home developers adding VOC detection

Buying Tip

Remember that this sensor requires a 5V supply and an analog input; check that your board can provide both before purchasing.

Elecvora expert review

Our verdict

The Seeed Studio Grove HCHO Sensor is a straightforward, affordable option for adding VOC detection to your projects. It offers a wide detection range and easy Grove integration, though it requires calibration and is not selective for formaldehyde alone.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy to use with Grove connectors
  • Detects a range of VOCs
  • Wide 1-50 ppm range
  • Compact and lightweight

Cons

  • Requires 5V power and analog input
  • Not selective for a single gas
  • Needs warm-up and calibration for accurate results

Best for

Makers and students building indoor air quality monitors

Not ideal for

Professional-grade formaldehyde measurement or safety-critical applications

Specifications

Item TypeGas Sensor
Operating Voltage (V)5
Model No. / NameGrove HCHO Sensor WSP
Target GasesHCHO Benzene Toluene Alcohol
Detecting Range1~50 ppm
Sensitivity (dBm)Rs(in air)/Rs(10ppm HCHO)≥5
Sensor Resistance10KΩ-100KΩ(in 10ppm HCHO)
Shipping Weight0.01 kg
Shipping Dimensions6 × 3 × 1 cm

What's in the box

  • 1 x Seeed Studio Grove HCHO Sensor

Frequently Asked Questions

What gases can this sensor detect?
It detects formaldehyde (HCHO), benzene, toluene, and alcohol. It is a general VOC sensor, so it responds to a combination of these gases.
What is the detection range?
The sensor can measure concentrations from 1 ppm to 50 ppm.
What voltage does it require?
It operates at 5V DC. Make sure your power supply can provide a stable 5V.
Is it compatible with Arduino?
Yes, it can be used with Arduino boards that have a 5V supply and analog inputs. You will need a Grove shield or adapter to connect it.
What is included in the package?
The package includes one Seeed Studio Grove HCHO Sensor. A Grove cable is not included unless specified.
How should I care for the sensor?
Avoid exposing it to high concentrations beyond the specified range and keep it away from moisture and dust. Store in a dry environment.

Overview

The Seeed Studio Grove HCHO Formaldehyde Gas Sensor is a semiconductor gas sensor designed to detect volatile organic compounds (VOCs) such as formaldehyde, benzene, toluene, and alcohol. Built around the WSP2110 sensing element, it changes its conductivity in response to gas concentration, producing an analog output that corresponds to the detected level. With a detection range of 1 to 50 ppm and a 5V operating voltage, this sensor is a practical choice for indoor air quality monitoring and gas detection projects.

Key Features

  • Broad VOC detection: Responds to HCHO, benzene, toluene, and alcohol.
  • Wide measuring range: Detects concentrations from 1 ppm up to 50 ppm.
  • Grove connectivity: Uses the standard Grove 4-pin interface for quick setup.
  • Analog output: Provides a signal that can be read by most microcontrollers with an ADC.
  • Compact design: Small footprint and low weight for easy integration.

Specifications Explained

Operating Voltage (5V): The sensor requires a 5V supply, which is common on development boards like Arduino and Raspberry Pi (with level shifting). Ensure your power source can provide a stable 5V.

Target Gases: The sensor is sensitive to formaldehyde (HCHO), benzene, toluene, and alcohol. This makes it suitable for general VOC monitoring rather than selective detection of a single gas.

Detecting Range (1~50 ppm): The sensor can measure concentrations from 1 part per million up to 50 ppm. It is not designed for sub-ppm or high-concentration measurements outside this range.

Sensitivity: The resistance ratio Rs(in air)/Rs(10ppm HCHO) ≥5 indicates a strong response to 10 ppm formaldehyde, allowing for reliable detection.

Sensor Resistance: In 10 ppm HCHO, the sensor resistance falls between 10KΩ and 100KΩ, which is a useful baseline for calibrating your readout circuit.

Compatibility and Requirements

The Grove HCHO Sensor is compatible with any microcontroller platform that supports the Grove interface and can read analog signals, such as Arduino or Raspberry Pi with an ADC. A 5V power supply is required. Note that the sensor output is analog, so your board must have an analog-to-digital converter. No additional libraries are strictly necessary, but you will need to write or source code to interpret the analog voltage.

Typical Uses

  • Indoor air quality monitoring in homes and offices
  • DIY gas detection projects with Arduino or Raspberry Pi
  • Educational demonstrations of VOC sensing
  • Prototyping environmental data loggers
  • Smart home integration for air quality alerts

What's in the Box

1 x Seeed Studio Grove HCHO Sensor.

Quick specs

Item Type
Gas Sensor
Operating Voltage (V)
5
Model No. / Name
Grove HCHO Sensor WSP
Target Gases
HCHO Benzene Toluene Alcohol
Detecting Range
1~50 ppm
Sensitivity (dBm)
Rs(in air)/Rs(10ppm HCHO)≥5
See all specifications