
1 / 4 · Click to enlarge
AI Summary
A 5V Grove-format reflective IR sensor that outputs a digital TTL signal when an object enters its adjustable detection range. The onboard potentiometer and red indicator LED make threshold tuning and status checks quick and visual.
Key Highlights
- High-sensitivity ITR9909 photo-reflector pairs an IR emitter with a phototransistor
- Digital TTL output switches high for black and low for white surfaces
- Onboard potentiometer adjusts detection threshold across roughly 90mm to 300mm
- Bright red indicator LED shows detection status without extra instrumentation
- 4-pin buckled Grove connector for tool-free wiring to Grove-compatible boards
- Runs from a 5V DC supply for simple integration into existing projects
Ideal For
- Makers building Grove-based robotics and automation projects
- Students learning reflective sensing and threshold adjustment
- Prototypers needing a quick digital presence trigger
- Educators assembling classroom electronics kits
- Hobbyists adding object counting to a small machine
Buying Tip
Before mounting it, set the potentiometer using the same surface colour and distance you expect in your project, because the trigger point shifts with material and range.
Elecvora expert review
Our verdict
A tidy, well-behaved reflective sensor for projects that just need a reliable digital trigger. The Grove connector and onboard LED remove most of the usual fiddling, though the output is binary rather than a true distance value.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Tool-free Grove connection with cable included
- Adjustable threshold with visible LED feedback
- Simple digital output that needs only one pin
- Compact and light for small builds
Cons
- Output is on/off, not a measured distance
- Detection point varies with surface colour and reflectivity
- Requires a 5V supply and a Grove-compatible host
Best for
Makers who need fast, repeatable object detection on a Grove-based board
Not ideal for
Projects that need calibrated distance measurement in millimetres
Specifications
| Operating Voltage (VDC) | 5V DC |
|---|---|
| Output Mode | TTL (High when black is detected, Low when white is detected) Digital |
| Grove Connectors | 4 pin Buckled Grove interface |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
What's in the box
- 1 x Grove IR Distance Interrupter v1.2
- 1 x Grove cable
Frequently Asked Questions
What kind of output does this sensor provide?
How do I change the detection distance?
What voltage does it need?
Is a cable included?
How can I tell when something is detected?
Will it work the same on every surface?
Overview
The Seeed Studio Grove IR Distance Interrupter v1.2 is a small reflective infrared sensing module for detecting objects that pass in front of it. At its centre is an ITR9909 photo-reflector containing a GaAs infrared emitting diode and a silicon planar phototransistor. Light from the emitter bounces off a nearby surface and is read by the phototransistor, which drives a digital output.
The result is a straightforward presence signal rather than an analogue distance reading. That makes the module easy to integrate into counting, edge detection and simple robotics tasks where a yes-or-no response is enough.
Key Features
- Digital TTL output: the line reads high when black is detected and low when white is detected.
- Adjustable threshold: a trimmer potentiometer sets the detection point, giving a working range of about 90mm to 300mm against white paper.
- Visual feedback: an integrated red LED lights when an object is detected and goes dark when nothing is present.
- Grove interface: the 4-pin buckled connector plugs into Grove-compatible boards and shields.
- Compact build: the module ships at just 0.01 kg, so it adds almost nothing to a build.
Specifications Explained
5V DC operating voltage means the module expects a regulated 5V supply, matching the logic level of most Grove host boards. Check your controller's Grove port before connecting.
Digital TTL output gives you two states only: high for black, low for white. Your code reads a single pin, so no ADC channel or conversion routine is needed.
Adjustable detection range is the practical headline. Turn the potentiometer to set how far away a white paper target triggers the sensor, anywhere from roughly 90mm to 300mm. Closer or darker targets will behave differently, so tune with the material you actually plan to detect.
Compatibility and Requirements
The module connects through a 4-pin buckled Grove interface and requires a 5V DC supply. Use it with Grove-compatible boards or shields that expose a digital Grove port. A Grove cable is included in the box, so no separate lead is needed.
Typical Uses
- Object presence and edge detection on small robots
- Counting items passing a fixed point
- Interactive installations and museum-style triggers
- Teaching projects covering reflective sensing and threshold tuning
What's in the Box
One Grove IR Distance Interrupter v1.2 module and one Grove cable.
Quick specs
- Operating Voltage (VDC)
- 5V DC
- Output Mode
- TTL (High when black is detected, Low when white is detected) Digital
- Grove Connectors
- 4 pin Buckled Grove interface
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 5 × 4 × 1 cm



















